Processing » Agitators, Blenders, Mixers » Mixers » Texas

Building Filters

56

Used processing in Texas, USA

  • LANCASTER K-8 113531

    LANCASTER K-8 113531

    • Manufacturer: Lancaster
    • Model: K-8

    "As Is, Where Is" Unused and Uninstalled Lancaster K-8 High Intensity Mixer. Dual Rotor High Intensity Mixer Type. Maximum Batch Capacity: 3000 liters or approximately 1680 kg of damp sulfur mix at a nominal loos...

    Cleveland, TX
  • MIXERS-LIQUID, PASTE & SLUDGE 91994

    MIXERS-LIQUID, PASTE & SLUDGE 91994

    • Manufacturer: COLBY

    COLBY SIZE #10 DISPERSER HOMOGENIZER; SIZE #10; 2" FEED ON SIDE & 2" OUTLET ON TOP MANUAL ADJUSTMENT; WITH A 20 HP MOTOR @ 1750 RPM, 230/460 VOLTS; 3 PHASE, 60 CYCLES;

    Cleveland, TX
  • MIXERS-LIQUID, PASTE & SLUDGE 91727

    MIXERS-LIQUID, PASTE & SLUDGE 91727

    • Manufacturer: Ross

    HIGH SPEED DISSOLVER IN A 200 GALLON 316SS TANK MFG. BY G. H. HICKS; DIMPLE JACKET RATED 110 PSI @ 325 DEG. F.;

    Cleveland, TX
  • DRAIS TSF-160 89847

    DRAIS TSF-160 89847

    • Manufacturer: Drais
    • Model: TSF-160

    DRAIS TYPE TSF-160 VACUUM PILOT PLANT DOUBLE ARM MIXER; TURBULENT SUPER FLUSHER; STAINLESS STEEL WETTED PARTS; 160 LITER CAPACITY; RATED FULL VACUUM; 125 PSIG JACKET; 60 HPDC MOTOR; CONTROLS;

    Cleveland, TX
  • MIXERS-LIQUID, PASTE & SLUDGE 89846

    MIXERS-LIQUID, PASTE & SLUDGE 89846

    • Manufacturer: Ross

    DOUBLE PLANETARY MIXER; Qty: 1 | Alloy: S | Gallons: 2 | Material: SS

    Cleveland, TX
  • LODIGE RINGLAYER CM350 105579

    LODIGE RINGLAYER CM350 105579

    • Manufacturer: Lödige

    PREVIOUS SERVICE: GYPSUM (CALCIUM SULFATE) PIGMENT FOR PAPER INDUSTRY; LODIGE RINGLAYER MIXER; CORIMIX MODEL CM350; BUILT IN 2008 HINGED COVER WITH COUNTERBALANCE; ; DESIGNED FOR CONTINUOUS OPERATION; ALL 316SS ...

    Cleveland, TX
  • BRAUN 8GMA33 102686

    BRAUN 8GMA33 102686

    • Manufacturer: Braun

    BRAUN MODEL 8GMA33 AIR MIXER; STAINLESS STEEL PRO/SHAFT; 2-30 HP INPUT; RATIO 5;

    Cleveland, TX
  • MIXERS-LIQUID, PASTE & SLUDGE 65677

    MIXERS-LIQUID, PASTE & SLUDGE 65677

    • Manufacturer: KADY MILL

    UNDERDRIVEN, BOTTOM ENTERING DISPERSION BLADES; VERTICAL JACKETED SS TANK, HINGED COVER; 50 HP @ 1770 RPM; 230/460 VOLT; WITH INTERNAL CIP SPRAY BALL NOZZLE; *W/2-INTERNAL LARGE BLADES & 3 S...

    Cleveland, TX
  • ELMOMET SW1-1000 105581

    ELMOMET SW1-1000 105581

    • Manufacturer: ELMOMET

    PREVIOUS SERVICE: GYPSUM (CALCIUM SULFATE) PIGMENT FOR PAPER INDUSTRY; ELMOMET SINGLE SHAFT PADDLE MIXER; BUILT IN 2008; 1M3 WORKING CAPACITY; MODEL SW1-1000; 146 RPM; ALL 316SS WITH PTFE LINING; SIEMENS 110/12...

    Cleveland, TX
  • NETZSCH PMD-VC-4000 102416

    NETZSCH PMD-VC-4000 102416

    • Manufacturer: Netzsch

    PREVIOUS SERVICE-PIGMENT DISPERSER; NETZSCH HIGH SPEED/LOW SPEED DISPERSION MIXER; 15 PSI @ 300 DEG. F. INTERNAL; 90 PSI @ 300 DEG. F. JACKET; 3" HALF PIPE COIL JACKET; 60/30 HP HIGH SPEED MIXER; 15 HP SLOW SPEE...

    Cleveland, TX
  • Kamyr Mixer

    Kamyr Mixer

    • Manufacturer: Kamyr

    Refurbished Kamyr model 30/20 MXT mixers, material Hastelloy

    Cypress, TX
  • Kamyr CLO2 Mixer

    Kamyr CLO2 Mixer

    • Manufacturer: Kamyr

    Kamyr CLO2 Mixer Model MXH30/20, Hp 200, 1200 RPM, Material Titanium

    Cypress, TX
  • Kamyr Mixer

    Kamyr Mixer

    • Manufacturer: Kamyr

    Refurbished Kamyr model 30/20 MXT mixers, material SS 317

    Cypress, TX
  • GL&V Tri-Phase Mixer

    GL&V Tri-Phase Mixer

    • Manufacturer: GL&V

    GL&V Tri-Phase Mixer (New) Size: Tri-Phase Mixer

    Cypress, TX
  • Kamyr CLO2 Mixer

    Kamyr CLO2 Mixer

    • Manufacturer: Kamyr

    Kamyr CLO2 Mixer Model MXH30/20, Hp 200, 1200 RPM, Material Stainless Steel

    Cypress, TX
1234

Overview

Mixers are vital machines used in various industries, including construction, food production, and pharmaceuticals, to blend, mix, or combine different materials. These machines come in different types and sizes, from small countertop models to large industrial units, designed to handle specific mixing tasks efficiently and effectively.

FAQ

What factors should I consider when purchasing a mixer?

Consider the type of materials you will be mixing, the required capacity, the power source, and any specific features like speed settings or timer functions. Check for durability and ease of maintenance as well.

How do I ensure my mixer is shipped safely?

Use a reliable shipping service experienced in handling industrial machinery. Ensure the mixer is properly secured and protected with cushioning materials to prevent damage during transit.

What maintenance does a mixer require?

Regular maintenance includes cleaning the mixing components after each use, checking and tightening any loose parts, and lubricating moving parts as needed. Follow the manufacturer's guidelines for more detailed maintenance schedules.