- Trusted Seller
Kovo Staněk TZB 1-5.5/700
used
- Manufacturer: Kovo Staněk
Maximum workpiece diameter: 345 mm | Maximum filling volume: 165 dm³ | Throwing wheel power: 7.5 kW | Blast room inside dimensions: 720 x 800 mm | Maximum load: 350 kg | Max. weight of the part: 15 kg
Brno, Czech Republic - Trusted Seller
2016 Battenfeld 160.750 Unilog B6P
used
- Manufacturer: Battenfeld
Total hours: 9806 h | Clamping force: 1600 kN | Height of the plate for mounting the mold: 300 mm | Distance between the columns (horizontal): 570 mm | Distance between the columns (vertical): 520 mm | Opening t...
Brno, Czech Republic - Trusted Seller
2010 Cooling device
used
- Manufacturer: ONI
Equipment: Outdoor cooling tower Cooling performance: 250 kW
Brno, Czech Republic - Trusted Seller
2004 Krauss Maffei KM 125-520C1
used
- Manufacturer: Krauss-Maffei
Total hours: 4818 h | Clamping force: 125 t | Plate dimensions: 745x770 mm | Weight of the injection molding machine: 6000 kg
Brno, Czech Republic - Trusted Seller
2005 Atmos SE 180
used
- Manufacturer: Atmos
Efficiency: 3.3 m³/min | Working pressure: 8 bar | Block speed: 5300 1/min | Power: 22.8 kW | Machine weight: 750 kg
Brno, Czech Republic - Trusted Seller
1997 Fini Rotar 1510
used
- Manufacturer: Fini
- Model: Rotar
Total hours: 8025 h | Machine height: 950 mm | Machine width: 850 mm | Machine length: 660 mm
Brno, Czech Republic - Trusted Seller
2013 Zerma GSH 500/1000
used
- Manufacturer: Zerma
- Model: GSH 500/1000
Rotor dimensions: Rotor design F5 5-legged-rotors Rotor blades: Number of rotor blade rows: 5 Drive motor: in kW: 75
Brno, Czech Republic - Trusted Seller
Packaging line
used
- Manufacturer: ApecAstro
Semi-automatic system Dosing range 2-30 kg Hopper capacity of the dosing device Receiving hopper with vibrator for emptying big bags Discharge conveyor for automatic filling of the storage hopper of the dosing de...
Brno, Czech Republic - Trusted Seller
Brno, Czech Republic - Trusted Seller
1998 Maplan MTF 1500 300
used
- Manufacturer: Maplan
Hours on: 14986 h | Clamping force: 300 t | Injection capacity: 1500 cm³ | Maximum injection pressure: 1980 bar | Mold height: min. 200 mm | Opening the mold: 500 mm | Dimensions of the heating platen: 660 x 760...
Brno, Czech Republic - Trusted Seller
2008 Donaldson DFO 3-36
used
- Manufacturer: Donaldson / Torit / DCE
Equipment: Replacement filters Machine dimensions: 3000 x 3140 x 3118 mm | Machine weight: 2075 kg
Brno, Czech Republic - Trusted Seller
2019 TONVA TVA-30L
used
- Manufacturer: TONVA
- Screw Diameter: 80 mm
- Clamping Force: 250 kN
Equipment: MAGUIRE PRS-20 mill Total hours: 8000 h | Clamping force: 250 kN | Injection mold stroke: 550 mm | Height of the plate for mounting the mold: 900 mm | Width of the plate for mounting the mold: 950 mm |...
Brno, Czech Republic - Trusted Seller
2012 S.A.F. DBS-200RCS
used
- Manufacturer: S.A.F.
Machine dimensions:: 11.5 x 5.15 x 3.86 m The line consists of: - Blast chamber - Dust separator OP 9 - Blow gun - Exhaust fan - DONALDSON TORIT filter cartridges - Elevator - Two-stage abrasive cleaner - Conveyo...
Brno, Czech Republic - Trusted Seller
2009 Kemper Filter-Master
used
- Manufacturer: Kemper
- Model: -MASTER
Supply voltage: 400 V | Airflow: 1200 m³/h | Machine weight: 80 kg
Brno, Czech Republic - Trusted Seller
2007 KOMFI AMIGA
used
- Manufacturer: Komfi
- Model: AMIGA
Equipment: Replacement heating coil Lower pressure roller Rear traction roller Compressor BECKER
Brno, Czech Republic 
Arburg Allrounder 320 Injection Molding
used
- Manufacturer: Arburg
- Model: Allrounder 320
Good condition Arburg Allrounder 320 Injection Moldings available between 1992 and 2007 years. Located in Czech Republic and other countries. Click request price for more information.
Czech Republic
Tip: Enter manufacturer, model or keyword