Used Motion Controllers in British Columbia, Canada

Zaber X-GSM Series
- Manufacturer: Zaber
Built-in controller; daisy-chains with other Zaber products 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation Low profile, small footprint 30 N load capacit...
Vancouver, Canada
Zaber VSR-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 20 mm or 40 mm travel Up to 48 mm/s speed and up to 200 N thrust 10 kg load capacity 55 or 85 mm retracted height Only 7 feedthrough wires required to control these units Designed f...
Vancouver, Canada
Zaber VSR-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 20 mm or 40 mm travel Up to 48 mm/s speed and up to 200 N thrust 10 kg load capacity 55 or 85 mm retracted height Only 7 feedthrough wires required to control these units Designed f...
Vancouver, Canada
Zaber LDA-AE Series
- Manufacturer: Zaber
25, 75, 150 mm travel options Up to 0.8 m/s speed and up to 4 g acceleration High repeatability (200 nm) and accuracy (1.5 µm), with 12 nm minimum incremental move Direct position measurement from 1 nm resolution...
Vancouver, Canada
Zaber LDA-AE Series
- Manufacturer: Zaber
25, 75, 150 mm travel options Up to 0.8 m/s speed and up to 4 g acceleration High repeatability (200 nm) and accuracy (1.5 µm), with 12 nm minimum incremental move Direct position measurement from 1 nm resolution...
Vancouver, Canada
Zaber RSM-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 0.02° repeatability 21 mm total height 4 mm aperture Worm gear driven for continuous rotation Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper m...
Vancouver, Canada
Zaber RSM-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 0.02° repeatability 21 mm total height 4 mm aperture Worm gear driven for continuous rotation Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper m...
Vancouver, Canada
Zaber LSM-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LRQ-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 75, 150, 300, 450, 600 mm travel Up to 205 mm/s speed and up to 100 N thrust 100 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepp...
Vancouver, Canada
Zaber LRQ-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 75, 150, 300, 450, 600 mm travel Up to 205 mm/s speed and up to 100 N thrust 100 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepp...
Vancouver, Canada
Zaber LRQ-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 75, 150, 300, 450, 600 mm travel Up to 205 mm/s speed and up to 100 N thrust 100 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepp...
Vancouver, Canada