Used ~4' x

2017 Ex Lodige KM 1200 D Continuous Ploughshare Mixer Unit #11849

• Manufacturer: Lödige

Former Lodige KM 1200 D continuous ploughshare mixer (1977) converted into a mixer-dryer (2017) by the previous owner. Modifications made: New enclosure/mixing chamber in 316 stainless steel. No electrical cabine...

VEM radiator with fan

• Manufacturer: Radiator Supply House

Radiator with fan, cooling fan, oil cooler VEM DM 102/4-A6/509 1400 rpm 220 / 380 V 3AC IP44 used, tested !

49861 sq ft fabsco fin fan heat exchanger

• Manufacturer: Fabsco

Unused Fin Fan Air Cooler Package, manufactured by Fabsco. Consisting of two bundles with a combined surface area of 2,367 bare sq. ft. and 49,861 extended sq. ft. Bundle #1 (AGR1 Amine Regeneration Overhead Air ...

CoreWorks Cryocore BAHX

• Manufacturer: CoreWorks

Unused approx 6600 Sq Ft CryoCore Multi-Stream BAHX Brazed Aluminum Heat Exchanger. Manufactured by CoreWorks. Flow rate: 20 MMSCFD. Core dimensions 98.43" x 23.62" x31.95". Max operating pressure 1440 PSIG @-320...

5700 sq ft joseph oat & sons stainless steel shell & tube heat exchanger

• Manufacturer: Joseph Oat & Sons

Unused 5700 Sq Ft SS U-Tube Shell & Tube Heat Exchanger Mfg Joseph Oat Corporation. 8 Pass. Carbon steel shell rated 150 psi at 200 degrees F. (1194) 3/4" Diameter x 11' long 304L stainless steel tubes rated 150 ...

5700 sq ft joseph oat & sons stainless steel shell & tube heat exchanger

• Manufacturer: Joseph Oat & Sons

Unused 5700 Sq. Ft. SS Shell & Tube Heat Exchanger. MfgJoseph Oat Corporation 8 Pass U Tube Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (1194) 3/4" Diameter x 11 long 304L stainless steel tubes...

2000 sq ft old dominion fabricators stainless steel shell & tube heat exchanger

• Manufacturer: Dominion

Used 2000 Sq Ft SS Heat Exchanger. 304-SS Shell rated 100 PSI at 300 deg. F. 304-SS Tubes rated 75 PSI at 300 deg. F. 304-SS Heads. Shell 2'4" dia. (624) 3/4" tubes x 16' L.- 2 Pass. OAL: 18'4". Shell nozzles: (1...

2099 sq ft tranter spiral heat exchanger

• Manufacturer: Tranter

Unused 2098 sq ft Horizontal Carbon Steel Spiral Heat Exchanger. Manufactured by Tranter. Shell & coil each rated Full Vacuum/24.5 bar (355 psi) at -45 to 200 degrees C. (-49 to 392 F.). Volume shell 2.225 cubic ...

26374 sq ft thermal engineering international titanium shell & tube heat exchanger

• Manufacturer: International

UNUSED 26,374 sq ft Thermal Engineering International Titanium Single Pass Shell and Tube Heat Exchanger. SA516-70 with Titanium clad Shell rated 150 psig @ 200F. Titanium Tubes rated at 150 psig@200F. Shell: 31...

3900 sq ft kennedy tank stainless steel shell & tube heat exchanger

• Manufacturer: Kennedy Tank

Used Kennedy Tank & Manufacturing Co. approximately 3900 sq. ft. horizontal heat exchanger. 304 Stainless shell and tube side. Overall dimensions: 44” diameter x 20'-6"” long. Shell rated 50 @ 250 degrees F. and...

Titan Metal Fabricators not applicable

• Manufacturer: Titan Metal Fabricators

Used Titanium shell Heat exchanger, shell & tube, 739 square feet, designed for 150 PSI/full vac @ 250 deg. F. on both shell & tube side. single pass, shell is type SA-106B mild steel, (484) tubes, 3/4" diameter ...

Melter SA de CV NEN

• Manufacturer: Melter SA de CV

Unused 1979 sq. ft. Melter SA de CV 304 Stainless Steel Shell & Tube Heat Exchanger. 1 pass shell side. 12 pass tube side. Type NEN, Horizontal. Stainless steel shell rated 120 psi / F.V. at 250 degrees F. (252)...

RUFFNECK HP5-30

• Manufacturer: Ruffneck

Made in: CANADA | Size: HP5 | Series: HP | Fan size: 30" | Air delivery: 4569 cfm | Air velocity: 814 fpm | Air throw: 70 ft. @ 15 psi stream | Propeller fan: 3 Wing Aluminum - 30 x 5/8-inch w/ 16 mm Bore | Moto...

ILK process cooling and heating unit

Process cooling and heating unit ILK PROJECT PV 07.13 Pump 1: GRUNDFOS CRN32-4 A-F-G-E-HQQE A9612235P10804 Q: 30 m³/h, H: 59.1 m, H max: 77.8 m , Motor: MG132SD2-38FF265-D1 7.5 kW 2900 - 2920 rpm 380 - 415 V 3AC ...

SICMI PSL 100 A

• Manufacturer: SICMI

Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Si...