Processing » Heat Exchangers » Ontario

Building Filters

60

Used Heat Exchangers in Ontario, Canada

  • Stainless Heat Exchanger

    Stainless Heat Exchanger

    • Manufacturer: Allegheny Bradford Corp

    -Shipping dimensions: length 41" x width 22" x height 12" -Big flange diameter: 7 1/2" -Small flange diameter: 4 1/4" -Input/output: 2 1/2" -Jacketed -MAWP 150 PSI AT 350 degree F -MDMT -20 degree F at 150 PSI -C...

    Brant, Canada
  • Jacketed Heat Exchanger

    Jacketed Heat Exchanger

    • Manufacturer: Allegheny Bradford Corp

    -Shipping dimensions: length 41" x width 22" x height 14" -Flange diameter: 7 1/2" -Input/output: 2 1/2" -MAWP: 150 PSI at 350 degree F -MDMT: -20 DEGREE F AT 150 PSI

    $3,088 USD
    Brant, Canada
  • Refrigerant heat exchanger CB30-24

    Refrigerant heat exchanger CB30-24

    • Manufacturer: Alfa lava

    -Shipping dimensions: Height 4" x Width 4 1/2" x Length 12 1/2" -Type: CB30-24 -Manufacturing date: 2012 08 15

    Brant, Canada
  • Alfa Laval Plate Heat Exchanger

    Alfa Laval Plate Heat Exchanger with a Grundfos Pump

    • Manufacturer: Alfa-Laval

    -Plate heat exchanger: Model: M6-MFM -1.0/1.3 MPA @ 145 DEGC Capacity -Serial number: 3011-83-225 -Grundfos Pump: -Model: A96559794P10833 -Serial number: 0001 -HP: 3 -1850 GPH -Head: 280 ft -Total dimensions: -He...

    $1,667 USD
    Brant, Canada
  • Trusted Seller
    Auction
    SULLAR Heat exchanger/ Air compressor

    SULLAR Heat exchanger/ Air compressor 300 (psi) 150 (psi) tube (Loc. Warehouse store)

      SULLAR Heat exchanger/ Air compressor 300 (psi) 150 (psi) tube (Loc. Warehouse store)

      Vaughan, Canada
      Visit Auction Website
    • Eng-A Industrial Air heater/ furnace,

      Eng-A Industrial Air heater/ furnace, waist heat recovery unit

        Eng-A Industrial Air Make Up Unit/furnace, waste heat recovery. 15 Hp double squirrel cage blower section rated at 20,000 CFM. 600 Volt 3 phase power Air handling / process / building / make up air / dryer /mid-e...

        $509 USD
        Toronto, Canada
      • Trusted Seller
        THERMAL TRANSFER PRODUCTS A0-35

        THERMAL TRANSFER PRODUCTS A0-35

        • Manufacturer: THERMAL TRANSFER PRODUCTS

        THERMAL TRANSFER PRODUCTS, A0-35, HEAT EXCHANGER, 575 VAC, 300 PSI WITH (2) BROOK, 30 HP, MOTORS AND (2) BRUENINGHAUS HYDROMATIK, 1,800 RPM PUMP, S/N 02400347

        Toronto, Canada
      • SS Drum lid with 17"

        SS Drum lid with 17" x 5" Serpentine

          -17" x 5" serpentine -19.5" drum lid diameter Characteristics: Industrial Process + Tanks, Sanitary Process Equipment, Water Treatment, Stainless Steel, Used | Price (cdn$): $750.00

          $544 USD
          Brant, Canada
        • Armstrong Heater/ HD steam unit

          Armstrong Heater/ HD steam unit

          • Manufacturer: Armstrong

          -Manufacturer: Armstrong-Hunt Inc -Model: AQ-181-HS-T12-Special -Design: 350 PSIG @ 650 degrees F -SN: 6374086C -CRN: 0H0506.6C -Baldor. Reliance Motor: HP: .75 -Volts: 115/208-230 -Amps: 6.3/ 3.4-3.15 -RPM: 1755...

          $797 USD
          Brant, Canada
        • Trusted Seller
          2005 HATEBUR AMP20S

          2005 HATEBUR AMP20S

          • Manufacturer: HATEBUR

          Equipped With * Induction Heater ( w Inverter) Mitsubishi Electrics Type HW-13 * Bar Feeding System with 32' Rack * Air Chiller for Heater ( RUA-SP3322) Toshiba Electrics * Plate Heat Exchanger (LX-195A-TNP-37) N...

          Vaughan, Canada
        • Trusted Seller
          Microfluidics M-210B-EH

          Microfluidics M-210B-EH

          • Manufacturer: Microfluidics

          This microfluidizer is all stainless steel. The heat exchanger is 500 psi shell, 150 psi tubes, 250°F temperature. It has a hydraulic fluid pump and reservoir, pressure control and gauge, prime / relief valve. Un...

          Barrie, Canada
        • Bucher Hydraulic Pack

          Bucher Hydraulic Pack

          • Manufacturer: Bucher Hydraulics Fluid Pack Corp

          -Bucher Hydraulics Fluid Pack Corp -Model number: M4515303-04H02F -Serial number: 50344697-11 -2HP -With heat exchanger: Model # RM-08-42 -Serial # 1224930 -300 PSI -350 Fahrenheit -Lincoln Motor: model# SRF2S2TL...

          $616 USD
          Brant, Canada
        • PHOEN 400 HC Indirect-Fired Heater

          PHOEN 400 HC Indirect-Fired Heater - Oil

            Indirect-Fired Mobile Space Heater with Two-Stage Burner The Arcotherm PHOEN Series is a duo of portable indirect-fired heaters available in either a gas (natural gas/propane) or oil (diesel/kerosene/jetfuel) ver...

            $7,784 USD

            Get financing

            Est. $153/mo

            Thornton, Canada
          • PHOEN 380 N Indirect-Fired Heater

            PHOEN 380 N Indirect-Fired Heater - Gas

              Indirect-Fired Mobile Space Heater with Two-Stage Burner The Arcotherm PHOEN Series is a duo of portable indirect-fired heaters available in either a gas (natural gas/propane) or oil (diesel/kerosene/jetfuel) ver...

              $7,784 USD

              Get financing

              Est. $153/mo

              Thornton, Canada
            • AIC B-Line Heat Exchangers

              AIC B-Line Heat Exchangers

              • Manufacturer: AIC

              B-Line heat exchangers are fabricated with the distinctive AIC helically corrugated tube design. Intended for use with high fluid flows and low temperature variances, these robust, compact heat exchangers are ide...

              Oakville, Canada
            1234

            Overview

            Heat exchangers are devices designed to transfer heat between two or more fluids without mixing them. They are widely used in various industries such as HVAC, power generation, chemical processing, and automotive to efficiently manage heat transfer processes. Common types include shell and tube, plate, and air-cooled heat exchangers.

            FAQ

            What factors should I consider when purchasing a heat exchanger?

            Consider the type of fluids involved, the required heat transfer rate, operating temperatures and pressures, and the specific application. It's also important to look at the material compatibility and maintenance requirements.

            How can I ensure my heat exchanger is shipped safely?

            Use a reputable shipping service experienced in handling industrial equipment. Ensure the heat exchanger is properly packed, secured, and protected against damage during transit.

            What maintenance is required for a heat exchanger?

            Regular maintenance includes inspecting for leaks, cleaning to remove fouling, checking for corrosion, and ensuring all connections and seals are intact. Follow the manufacturer’s recommendations for detailed maintenance procedures.