Building Filters

Used Nauta Processing

Trusted Seller
NAUTA 17 CU. FT.
- used
- Manufacturer: Nauta
Used Approximately 17 Cubic Foot (500 kg) Stainless Steel Nauta Mixer Dimple Jacket (multi zone) Mounted on steel frame
Hainesport, NJ
Trusted Seller
353 Cu Ft Day Nauta Mixer, 304 S/S
- used
- Manufacturer: Nauta
353 Cu Ft Day Nauta Mixer, 304 S/S Used 353 cu ft Day Nauta mixer, model MBX-3530, 304 stainless steel construction, approximately 130" inner diameter x 199" deep cone, flat top, top mounted drive with 2 hp orbit...
Cleveland, OH
Trusted Seller
10.2 Cu Ft Day Nauta Mixer, 304 S/S, Model FA 10
- used
- Manufacturer: Nauta
10.2 Cu Ft Day Nauta Mixer, 304 S/S, Model FA 10 Used 10.2 cu ft Day Nauta mixer, 304 stainless steel construction, model FA 10, jacket rated 125 psi at 353 f, with top mounted gearbox, requires .75 hp orbit arm ...
Cleveland, OH
Trusted Seller
Stainless Steel 304 Vrieco Nauta 150RB-5 Mixer-Nauta - IPP# 205955
- used
- Manufacturer: Nauta
Vrieco Nauta orbital screw mixer 15 PSIG @ 275 degrees F internal ASME Code stamped Internals have a 180 grit polished finish. All Welds ground smooth, and screw is also polished with a 180 grit finish With 30HP ...
Princeton Junction, NJ
Trusted Seller
141 Cu Ft Day Nauta Dryer, 304 S/S, Model MBX-1410
- used
- Manufacturer: Nauta
141 Cu Ft Day Nauta Dryer, 304 S/S, Model MBX-1410 Used 141 cu ft Day nauta vacuum dryer, model MBX-1410, 304 stainless steel construction, rated full vacuum internal, jacketed for 125 psi at 353 f, 5 hp swing ar...
Cleveland, OH
Trusted Seller
10.2 Cu Ft Day Nauta Mixer, 304 S/S, Model FA 10
- used
- Manufacturer: Nauta
10.2 Cu Ft Day Nauta Mixer, 304 S/S, Model FA 10 Used 10.2 cu ft Day Nauta mixer, 304 stainless steel construction, model FA 10, jacket rated 125 psi at 353 f, with top mounted gearbox, requires .75 hp orbit arm ...
Cleveland, OH
Trusted Seller
Miscellaneous Nauta Parts for 70 cu. ft. JH Day Nauta
- used
- Manufacturer: Nauta
Miscellaneous Nauta Parts for 70 cu. ft. JH Day Nauta. (2) S/S Lumpbreaker shafts, (2) S/S Nauta Shafts for Screw (JH Item# 314494-3), (4) S/S Nauta Ball Supports (JH Item# 323579-4), (2) S/S Ball Seats-Lower (J...
Wilmington, NC
Trusted Seller
Stainless Steel 316 Vrieco Nauta 20 VB-S Dryer-Nauta - IPP# 706888
- used
- Manufacturer: Nauta
jacketed conical dryer fabrik #10861 protection class Ex-e-T3 weld dished top, top driven screw orbital arm driven by 0.55 kW, 3/50/500 volt, 1370 rpm Ex e T3 IP44 motor via a 32 rpm reduction gearbox 2m top cone...
Princeton Junction, NJ
Trusted Seller
NAUTA Stainless Steel Conical Screw Mixer
- used
- Manufacturer: Nauta
NAUTA Stainless Steel Conical Screw Mixer NAUTA Stainless Steel Conical Screw Mixer, 17 Cubic Feet (500 kg), Multi-Zone Dimple Jacket, Mounted on Steel Frame
Hainesport, NJ
Trusted Seller
Mixer-Nauta 7,000 L (1,849 gallons) Stainless Steel 304 - IPP# 94101
- used
- Manufacturer: Nauta
single screw Nauta mixer Mixing chamber 120" dia x 173" Rotating arm driven by 2 HP, 3/60/230/460 volt, 1725 rpm motor Openings: 2-24", 2-8" Screw has bottom steady bearing rotation 1.437 rpm
Princeton Junction, NJ
Trusted Seller
Mixer-Nauta 7,000 L (1,849 gallons) Stainless Steel 304 - IPP# 94100
- used
- Manufacturer: Nauta
single screw Nauta mixer. Mixing chamber 120" dia x 173" cone. Rotating arm driven by 2 HP, 3/60/230/460 volt, 1725 rpm motor. Openings: 2-24", 2-8". Screw has bottom steady bearing. Shaft speed 59.87 rpm, rotati...
Princeton Junction, NJ
Trusted Seller
Mixer-Nauta 7,000 L (1,849 gallons) Stainless Steel 304 - IPP# 94099
- used
- Manufacturer: Nauta
single screw Nauta mixer Mixing chamber 120" dia x 173" cone Rotating arm driven by 2 HP, 3/60/230/460 volt, 1725 rpm motor. Openings: 2-24", 2-8". Screw has bottom steady bearing. Shaft speed 59.87 rpm, rotation...
Princeton Junction, NJ
Trusted Seller
Mixer-Nauta 8,000 L (2,113 gallons) Stainless Steel 316 - IPP# 211836
- used
- Manufacturer: Nauta
order #M-16668, bolt flat top, screw and orbital arm both driven from the top, orbital arm driven by 2.2 kw, 3/50/220/380 volt, 1450 rpm motor 316 s/steel (1.4401) screw 350mm diameter x 4526mm long, 270mm screw ...
Princeton Junction, NJ
Trusted Seller
Mixer-Nauta 10,000 L (2,642 gallons) Stainless Steel 316 - IPP# 705252
- used
- Manufacturer: Nauta
truncated cone mixer 3080mm top diameter x 2440mm high cone section with 1800mm diameter truncated cone bottom Max speed 20 rpm 316 stainless steel twin helical agitator on single shaft. serial #21084086/1 20-710...
Princeton Junction, NJ
Trusted Seller
Mixer-Nauta 6,000 L (1,585 gallons) Stainless Steel 316 - IPP# 211835
- used
- Manufacturer: Nauta
order #16667 high conical section bolt flat top, screw and rotating orbital arm both driven from the top orbital arm driven by 1.5kw, 3/50/220/380 volt, 1420 rpm motor via 50 rpm reduction gearbox screw 350mm dia...
Princeton Junction, NJ