NARDINI GPRII
- Manufacturer: Nardini
- Spindle bore: 52 mm
Command: Adtec (new and with warranty) | Permissible diameter on the busbar: 440 mm | Distance between ends: 1.000 mm | Admissible diameter over the table wings: 400 mm | Admissible diameter over the cross slide...
Limeira - State of São Paulo, Brazil
NARDINI LOGIC 250
- Manufacturer: Nardini
- Spindle bore: 80 mm
Command: Fagor 8035T | Permissible diameter on the busbar: 500 mm | Distance between ends: 1.050 mm | Admissible distance between the plate and the point: 1.020 mm | Admissible length with automatic tower: 920 m...
Limeira - State of São Paulo, Brazil
2005 NARDINI DIPLOMAT LOGIC 350 FAST-TRACE
- Manufacturer: Nardini
- Spindle bore: 120 mm
Command: FAGOR 8055 | Permissible diameter on the busbar: 700 mm | Distance between ends: 2.050 mm | Admissible distance between the plate and the point: 2.020 mm | Admissible diameter over the cross slide: 420 ...
Limeira - State of São Paulo, Brazil
NARDINI GPRII
- Manufacturer: Nardini
- Spindle bore: 52 mm
Command: MCS RX510 | Permissible diameter on the busbar: 440 mm | Distance between ends: 1.000 mm | Admissible diameter over the table wings: 400 mm | Admissible diameter over the cross slide: 250 mm | Cross car...
Limeira - State of São Paulo, Brazil
NARDINI LOGIC 175
- Manufacturer: Nardini
- Spindle bore: 52 mm
Command: MCS | Permissible diameter on the busbar: 350 mm | Distance between ends: 490 mm | Admissible distance between the plate and the point: 470 mm | Admissible diameter over the cross slide: 160 mm | Cross ...
Limeira - State of São Paulo, BrazilCNC LATHE NARDINI ND 195 E
- Manufacturer: Nardini
No comments have been posted for this product, be the first! Comment NARDINI CNC LATHE ND 195 E NARDINI ND 195 E CNC LATHE Brand: Nardini Model: ND 195 E, Nodus-CNC Mod. GPR Turning: 400mm Between tips: 1000mm Wo...
São Paulo, BrazilCNC LATHE NARDINI LOGIC 220 440X1000
- Manufacturer: Nardini
No comments have been posted for this product, be the first! Comment CNC LATHE NARDINI LOGIC 220 440X1000 Nardini Logic 220 CNC lathe Brand: Nardini Model: Logic 220 Control: Siemens Board: Hydraulic Counterpoint...
São Paulo, Brazil
CNC lathe brand Nardini model Logic 195 1,000 mm
- Manufacturer: Nardini
CNC lathe, Nardini brand, Logic 195 model. It is located in the factory, turned on and working normally. We have 05 machines similar to this one, all Logic 195 models and approximate years, they are in the same f...
CNC lathe brand Nardini model ECO-14 500 mm between tips
- Manufacturer: Nardini
Nardini CNC lathe Model ECO-14 CNC VS Command MCS RX505 Between ends 500 mm 7.5 HP engine A braking resistor has been installed A CFW-11 frequency inverter was installed working in industry
2012 CNC lathe brand Nardini Logic 350 (Diam x Comp) 700 x 1900 mm
- Manufacturer: Nardini
CNC lathe brand Nardini Logic 350 Model year 2012 Fanuc-0i Command Plate of 03 nuts 315 mm, mechanical, manual Diameter over busbar 700 mm Diameter over carriage 400 mm Tree hole diameter 100 mm Distance between ...
Tip: Enter manufacturer, model or keyword
