Machine Tools » Nakashimada » Ontario

Building Filters

8

Used Nakashimada Machine Tools in Ontario, Canada

Trusted Seller
1993 NAKASHIMADA NP-40
- Manufacturer: Nakashimada
Equipped With Features: * Bushing Cutoff * TM6 Monitor * Oil Separator * 2 Plane Straightener * PKO
Vaughan, Canada
Trusted Seller
2000 NAKASHIMADA NP-81
- Manufacturer: Nakashimada
Equipped With Features: • POSITIVE KNOCKOUT IN 1ST ,2ND & 3RD PUNCH • DIE RELIEVING KNOCKOUT IN 2ND DIE • FINGERLESS TRANSFER
Vaughan, Canada
Trusted Seller
1982 NAKASHIMADA PF-1080
- Manufacturer: Nakashimada
Equipped With Double Knife Shearing Method Fingerless Transfer System Positive Knockout -Second & Third Punches Knock out relief device Positive Interlocked lub system on all critical areas Eddy-Current variable ...
Vaughan, Canada
Trusted Seller
1976 NAKASHIMADA PF-630
- Manufacturer: Nakashimada
- Model: PF-630
Equipped With * Variable Speed Drive * Fingerless Transfer
Vaughan, Canada
Trusted Seller
1987 NAKASHIMADA PF-420
- Manufacturer: Nakashimada
- Model: PF-420
Equipped With * Fingerless transfer Maximum cut-off diameter: 4mm (.158") | Maximum cut-off length: 25mm (1.00") | 1st die knockout stroke: 50mm (2.00") | 2nd die knockout stroke: 20mm (.788") | Output: 80, 100, ...
Vaughan, Canada
Trusted Seller
1975 NAKASHIMADA H-20E
- Manufacturer: Nakashimada
Equipped With * PKO * Variable speed Maximum wire diameter: 6.0mm (.237") | Maximum cut-off length: 95mm (3.740") | Max shank length: 75mm (3") | Production speed: 180-200ppm | Main motor: 7.5hp | Net weight,appr...
Vaughan, Canada
Trusted Seller
1977 NAKASHIMADA H-20AU
- Manufacturer: Nakashimada
Equipped With Maximum wire diameter: 6.0mm (.237") | Maximum cut-off length: 70mm (2.755") | Max shank length: 55mm (1.968") | Production speed: 180-200ppm | Main motor: 7.5hp | Net weight,approx: 7,500 lbs
Vaughan, Canada
Trusted Seller
1996 NAKASHIMADA TH2-6A
- Manufacturer: Nakashimada
Equipped With Features: * PKO Maximum cutoff diameter: 7 millimeters | Maximum cutoff length: 95 millimeters | Minimum cut-off length: 1/2" (12mm) | Maximum kickout length: 3 inches | Minimum die kickout: 3/8" (1...
Vaughan, Canada