Used Processing in Bavaria, Germany

gear motor

• Manufacturer: Bauer Gear Motor GmbH

Additional title: spur gear, three phase motor | Engine speed: 700 rpm | Gear unit speed: 98 rpm | Torque: 85 Nm | Power factor: 0 Cos ϕ | Power: 0,37 kW | Current: 1,45 A Y | Voltage: 380 V Y | Frequency: 5...

gear motor

• Manufacturer: Bauer Gear Motor GmbH

Additional title: Three-phase asynchronous motor, helical gear box | Operating hours: 0 | Engine speed: 1330 rpm | Gear unit speed: 56 rpm | Power factor: 0 Cos ϕ | Power: 0,33 kW | Current: 1,07 A | Voltage: 38...

braking resistor

• Manufacturer: SEW-Eurodrive

Resistor: Ohm | Power: W

Motor

• Manufacturer: SEW-Eurodrive

Motor with worm gear, hollow shaft and temperature Sensor

frequency converter

• Manufacturer: Danfoss GmbH

This frequency converter is available in the following sizes: VLT 5001 - 0.75 kW VLT 5002 - 1.1 kW VLT 5003 - 1.5 kW VLT 5004 - 2.2 kW Please indicate the desired flowmeter size.

2014 Achberg -

• Manufacturer: Achberg

Achberg Outside silo 62m3; weight 2300kg; bulk density 600kg/m3; max. overpressure +45mbar; max. underpressure -5mbar; opersting temp. max. 50°C; material ALMG3 Condition: Good

2014 Achberg -

• Manufacturer: Achberg

Achberg Outside silo 62m3; weight 2300kg; bulk density 600kg/m3; max. overpressure +45mbar; max. underpressure -5mbar; opersting temp. max. 50°C; material ALMG3 Condition: Good

2017 Krauss Maffei ZE25A x 47D UTXi-UG 89-001558

• Manufacturer: Krauss-Maffei

Used Krauss Maffei ZE25A ? 47D UTXi-UG - High-Performance Twin-Screw Extruder We offer a high-quality, used, co-rotating twin-screw extruder, model ZE25A x 47D UTXi-UG , from Krauss Maffei ? ideal for demanding c...

Homogenizer

• Manufacturer: GEA Group Aktiengesellschaft

Single-stage homogeniser, used for hop suspensions with a particle size of 1 µm. Integration into a higher-level control system is possible via signal exchange. The motor was controlled via an external FI.

Flash pasteuriser

• Manufacturer: API Schmidt-Bretten GmbH Co. KG

consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank...

2017 Combined Extrusion Thermoforming Line Cannon/Breyer

Item Description/Artikelbeschreibung: Lot consists of: (1) Combined Extrusion Thermoforming LineDeutsch: Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermofo...

2014 Combined Extrusion Thermoforming Line Cannon/Breyer

Item Description/Artikelbeschreibung: Lot consists of: (1) Combined Extrusion Thermoforming LineDeutsch: Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermofo...

Roller

• Manufacturer: Roller

Compact room cooler with one fan. Nominal capacity appr.: 0.2 to 2.0 kW (depending on process and environmental conditions) | Air volume: 470 m3/h | Temperature range: 40 °C | Operating pressure: 25 bar | Power: ...

Water tanks

• Manufacturer: Jacob Carl

Water tanks for a 100 hl brewhouse. Manufacturer: Jacob Carl Year of construction: 1992 Consisting of: 1 brewing water tank: D= approx. 2500 mm, capacity approx. 16.5 m³ with insulation and cladding 1 service w...