Used Threading & Tapping in Bern, Switzerland

TAPPING UNIT “TECNOPINZ” TYPE TP4 13X315

• Manufacturer: TECNOPINZ

SKU: 9160008 Weight: 10 kg

TAPPING UNIT ANBOHRGERATE “TECNOPINZ” TYP TP4 13X315

• Manufacturer: TECNOPINZ

SKU: 9160007 Weight: 10 kg

tapping machine

tapping machine

2008 UNIFY UM-30

• Manufacturer: UNIFY

Min. diameter threaded: 6 mm | Max. diameter threaded: 30 mm | Min. pitch: 1 mm | Max. pitch: 4 mm | Max. roll die diameter: 148 mm | Roll die width: 35 - 70 mm | Max. rolling force: 17 to | Min.: 130 mm | Max: ...

2012 UNIFY UM-20

• Manufacturer: UNIFY

Min. diameter threaded: 4 mm | Max. diameter threaded: 20 mm | Min. pitch: 1 mm | Max. pitch: 3 mm | Max. roll die diameter: 118 mm | Roll die width: 50 mm | Min.: 100 mm | Max: 135 mm | Shaft diameter: 40 mm | ...

2012 UNIFY UM 3 DL

• Manufacturer: UNIFY

Min. diameter threaded: 27 mm | Max. diameter threaded: 90 mm | Min. pitch: 1 mm | Max. pitch: 6 mm | Max. infeed length: 68 mm | Max. roll die diameter: 150 mm | Roll die width: 35,70 mm | Max. rolling force: 1...

2010 LEISTRITZ RR 120 BHF

• Manufacturer: Leistritz

Control: SIEMENS | Min. diameter threaded: 2 mm | Max. diameter threaded: 50 mm | Min. pitch: 0.35 mm | Max. pitch: 3 mm | Max. infeed length: 85 mm | Min. roll die diameter: 120 mm | Roll die width: 90 mm | Rol...

WELLCAM GT 16VL

• Manufacturer: WELLCAM

Tapping from: 3 M | Up to: 200 t/min | From: 50 t/min | Voltage 50 hz 3x: 380 Volt | Machine's weight about: 150 kg

WELLCAM HT 36V

• Manufacturer: WELLCAM

Tapping from: 5 M | Up to: 200 t/min | Inner taper type: 3-TC1433 | From: 50 t/min | Table length: 750 mm | Table width: 620 mm | Cutting speed: 50 - 2000 m/min | Hydraulic pressure: 150 kg | Voltage 50 hz 3x: 3...

QUICK-CHANGE TAPPING CHUCKS “EROGLU” ISO 40 A M5-M24 AC

• Manufacturer: EROGLOU

with length compensation – shape A – M5 to M24 Weight: 1.75 kg

QUICK-CHANGE TAPPING CHUCKS “EROGLU” ISO 40 A M14-M36 AC

• Manufacturer: Eroglu

with length compensation – shape A – M14 to M36 AC

QUICK-CHANGE TAPPING CHUCKS “EROGLU” ISO 40 A M2-M14 AC

• Manufacturer: EROGLU

with length compensation – shape A – M2 to M14 Weight: 1.1 kg

QUICK-CHANGE TAPPING CHUCKS “EROGLU” ISO 30 A M5-M24 AC

• Manufacturer: EROGLU

with length compensation – shape A – M5 to M24 Weight: 1.3 kg

QUICK-CHANGE TAPPING CHUCKS “EROGLU” TYPE ISO 40 DIN 69871

without length compensation – shape A – M5 to M24 Weight: 1.45 kg

QUICK-CHANGE TAPPING CHUCKS “EROGLU” TYPE ISO 30 DIN 69871

without length compensation – shape A – M5 to M24 Weight: 1.3 kg