Used electronics in Tennessee, USA

Dake SE 5X6 RCT Benchtop Horizontal Bandsaw – 983107-1

• Manufacturer: Dake

This semi-automatic benchtop horizontal bandsaw is small in size but not in power. Featuring new reverse cutting technology for cooler cutting and faster, cleaner cuts. Designed for on-the-go applications this sa...

Laguna 14|CX Bandsaw

• Manufacturer: Laguna

The 14CX combines the reliability and performance of our traditional woodworking bandsaws with new enhanced upgrades that now enables the cutting of ferrous metals. With the new addition of a Digital Readout pair...

Laguna 14|12 Bandsaw

• Manufacturer: Laguna

The 14|12 Bandsaw is a 110 Volt saw that feels like a 220. Features include pyramid shaped spine, 1 ¾ HP TEFC Motor, quick release tension, 115 volt outlet and micro polished 21″ x 16″ table mounted onto oversize...

Northtech NT-UCS24 (24″) 15HP Upcut Saw (Right or Left) 230/460V

This innovative up-cut saw from Northtech quickly and safely cut boards up to 21 inches wide or 8 inches high. The powerful 15 HP motor and 24″ diameter blade reliably produce clean and consistent results. Up to ...

RazorGage Cyclone 600 Upcut Saw

INDUSTRIAL UPCUT SAW The Cyclone 600 Upcut Saw from RazorGage is one of the safest, most rugged, and precise upcut saws on the market. This industrial upcut saw provides razor-sharp cuts 20 inches wide with virtu...

Northtech NT AW-400PBX Horizontal Bandsaw

The Northtech NT AW-400PBX Horizontal Bandsaw features a powerful 40 HP motor to drive the 2” x 208″ blade at speeds from 4700 – 6750 FPM . The 15-1/4′ (W) feed belt is driven by an inverter-controlled 3 HP motor...

Northtech NT HBR-300S Horizontal Bandsaw

The Northtech NT HBR-300S Horizontal Bandsaw features a 20 HP soft (Wye-Delta) start motor driving the 170″ (L) blade at 6200 FPM. A 5 HP reversible hydraulic pump smoothly powers the feed conveyor at speeds betw...

Northtech NT 600A Vertical Band Saw

The Northtech NT 600A Vertical Bandsaw has a 7.5 HP motor, 2” x 208″ blade, and a maximum cut thickness of 13-12″. The 23-3/4” x 26” cast iron worktable is tiltable up to 60 degrees and features a 3-3/4” x 18” fe...