Roller Conveyor
End of line roller conveyor. Mild steel frame with 14 steel rollers. 1080mm Long. 450mm Wide. 700mm High. Legs adjustable. One end of conveyor has a stop built in. Unit in good condition.
Melbourne, AustraliaALFA LAVAL M6-MFG
- Manufacturer: Alfa-Laval
- Model: M6
Alfa Laval – Plate Heat Exchanger. 2 Inch fittings Unit is in good condition.
Melbourne, AustraliaWINEQUIP QH-TL6B
- Manufacturer: WINEQUIP
Winequip – Plate Heat Exchanger. Heat exchanger area: 3.8m2 | Max design temp: 110C | Max working pressure: 1.6MPa | Plate material: AISI 304 / 0.5mm | Gasket material: NBR
Melbourne, AustraliaCONTECH ENGINEERING 5.5 x 340
- Manufacturer: CONTECH ENGINEERING
Flat belt food grade conveyor. 5.5m long x 340mm wide. stainless steel frame with mild steel legs mounted on castors. SEW 0.37kw 21-104 rpm Mechanical variable speed drive. 800mm height from ground.
Melbourne, AustraliaNEDERMAN Filterbox
- Manufacturer: Nedermann
- Model: FILTERBOX
Nederman Filterbox – Portable Dust or Fume Filter 2.2kw, 415V, 4.3amps Approx 700CFM Fitted with an exhaust silencer The Filterbox offers a powerful and efficient solution for capturing dust and fumes directly at...
Melbourne, AustraliaMOWANG F-L11
- Manufacturer: MOWANG
MOWANG – High Speed Disperser. (Ex. Rated) Disperser mounted to a 500mm riser. Disperser complete with controls, elecrical cabinet and a hydraulic power pack for lifting blade. Both main motor and hydraulic motor...
Melbourne, AustraliaREEVES 4000
- Manufacturer: Reeves
Disperser with 4000Litre St/Steel Tank. 30Kw variable speed drive motor 540-2800RPM 415V St/Steel Shaft with dual blades. Mild steel platform (Air compressor not included).
Melbourne, AustraliaHigh Speed Disperser. 5.5kW
High Speed Disperser. Reeves variable speed drive. Manually lifted with aid of counterweght. Disperser was removed from an ink manufacturer. Unit to be run and tested. Mutiple paint pots also available for purcha...
Melbourne, AustraliaREEVES 150
- Manufacturer: Reeves
High Speed Disperser. (Ex. Rated) Pneumatically raised and lowered. Reeves variable speed drive with WEG Ex rated motor. Platform has a backstop for paint pot to be secured to. Disperser complete with Ex. starter...
Melbourne, AustraliaFood Grade Trough Conveyor
Trough Conveyor with food grade belt. 2.4 Metres long, 290mm wide. (Belt) Speed approx 10m/min. Geared motor 3 phase, 0.37kW, 415V, 1.15A. Frame has some scratches and dents but otherwise runs nicely. It’s recomm...
Melbourne, AustraliaCMG 5.5
- Manufacturer: CMG
Stainless steel high shear disperser / emulsifier. (High speed mixer) with Ex. motor. Suitable for dropping into tanks to mix or emulsify the liquids. A high shear mixer can be used to create emulsions, suspensio...
Melbourne, AustraliaATLAS LIFT XEB-U
- Manufacturer: Atlas
The U shape lift table are designed in a unique ‘U’ shape for the seamless handling of pallets and mesh boxes.This particular lift table is for use in the assembly line and production lines. The U shaped static l...
Melbourne, AustraliaVacuum Transfer System
Complete Vacuum Transfer System for Powders Efficient and reliable powder handling system with a transfer capacity of approximately 2 tonnes per hour. System includes: Stainless Steel 4000L Silo ? robust storage ...
Melbourne, AustraliaPATTYN 5700
- Manufacturer: PATTYN
Food Grade Cleated Elevating Conveyor. Specificatios: Discharge height 3.2m (adjustable) Belt width 500mm Cleat Height 40mm 600mm long flat section at the bottom 900mm flat section at the top The incline is 4200m...
Melbourne, Australia

