Used Processing in New Jersey, USA

- IPP# 211968

• Manufacturer: Airoil-Flaregas

Airoil-Flaregas F.C.10 flare tip, Pilots Derrick supported Flare stack, Customer ref #62/3336085/2H1/ON, The FC.10 flare tip inclusive of the Flarex molecular seal, Derrick supported flare stack and Knock out dru...

AL-6XN Chema Balke Dürr GmbH Batch-Type Agitated Reactor - IPP# 235800

• Manufacturer: Dürr

1.4529 SS (AL-6XN super-Austenitic SS) fermenter/ reactor with internal cooling coil and sparge ring for gas addition Polished stainless steel interior motor : 3/50/380 volt Bergmann double mechanical seal on sha...

Low Temp Chiller 771,100 kcal/h (255 Ref. Ton) - IPP# 216002

• Manufacturer: Trane

CentraVac Low temperture, Series R chiller Drive motor: 197 kW, rated for 460 volt, 3 ph, 60 Hz Requires 705 lbs Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. Co...

Stainless Steel 316L Centrifuge-Lab - IPP# 239308

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Lab Centrifuge Stainless Steel 316L Centritec Cell 8 - IPP# 239307

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert The system offers these advantages Single use, rapid changeover dispo...

Major Items Plastic Stainless Steel 316 - IPP# 205765

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

Major Items Plastic Stainless Steel 316 - IPP# 205766

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer cutter the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Me...

Centrifuge-Disc Bowl 30 kW (40.2 HP) Stainless Steel - IPP# 220241

• Manufacturer: Disco

manufacturers #881150-02-S-03-SK-02-0259 feed density 1110 kg/cm3 sediment density 1251 kg/cm3 control fluid density 1000 kg/cm3 process temperature 0-100 deg C 438mm diameter bowl Swep 316 s/steel (1.4401) plate...

Stainless Steel 316 Centrifuge-Lab - IPP# 239309

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Stainless Steel 317 Andritz SZ400/2 Centrifuge-Pusher - IPP# 232766

• Manufacturer: Andritz

316 stainless steel 5.5 ton/hour troughput of solids 130 degrees C (max) inner diameter of outer basket 412mm, inside diameter of inner basket 356mm cake thickness of outer basket 41mm (max), inner basket 40mm ce...

IPP# 601964, PET Cutter System-(4) cutters-6900 kg/hr max. (ea) Polymers - Fibres and Plastics

PET Cutter System consisting of: (4) Rieter (Maag) Underwater strand pelletizers ( M-USG 900 V) vertical design (providing space savings and easy access to the cutter head) 316 SS contact Each System is Designed ...

Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic - IPP# 233810

• Manufacturer: Rieter

Type: Underwater strand pelletizing system Complete system includes the Rieter M-USG 900 V cutter. strand transfer equipment, pellet cooler and screener The cutter IPP Stock # 205766- Rieter (Maag) the vertical d...

Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic - IPP# 233813

• Manufacturer: Rieter

Underwater strand pelletizing system Cutter included: Rieter M-USG 900 V Strand transfer equipment included Pellet cooler included Screener included The cutter IPP Stock # 205764- Rieter (Maag), M-USG 900 V Under...

Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic - IPP# 233811

• Manufacturer: Rieter

Type: Underwater strand pelletizing system Components: Rieter M-USG 900 V cutter, strand transfer equipment, pellet cooler, and screener The cutter IPP Stock # 205765- Rieter (Maag), M-USG 900 V the vertical desi...

Major Items Plastic Stainless Steel 316 - IPP# 205767

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...