Used Granulators & Pelletizers in Illinois, USA

NELMOR RG810M1 GRANULATOR 14301

• Manufacturer: Nelmor

Nelmor model RG810M1 granulator, S/N 9307-33501. 8″ x 10″ feed throat, 5 knife solid rotor, 2 bed knife, 5HP 230/460V motor. Double wall tray, conveyor feed hopper, and insulated body panels, bin discharge, mount...

SEM / NELMOR G1424MB GRANULATOR 18273

• Manufacturer: Nelmor

Nelmor / SEM model G1424MB granulator. No S/N. 14″ x 24″ feed throat. 3 knife solid rotor, 2 bed knife. 40 HP 230/460-volt 1770 RPM motor with heavy duty outboard bearings. Single wall tray feed hopper. 6″ OD rig...

CUMBERLAND 684 TWIN SHEAR GRANULATOR 18170

• Manufacturer: Cumberland

Cumberland model 684 granulator. S/N 291650-84002. 14″ x 26″ feed throat. 3 knife twin shear rotor, 2 bed knife. 30 HP 460-volt motor. Insulated tray feed hopper and body panels. 6″ OD airveyor discharge. On cast...

NELMOR G16295M1 GRANULATOR 16416

• Manufacturer: Nelmor

Nelmor model G16295M1 granulator. S/N 7606-8051. 16″ x 29.5″ feed throat, 3 knife solid rotor, 2 bed knife. 2 x 15HP 460V motors, double wall tray feed hopper, 5″ OD airveyor discharge, mounted on a modified leg ...

NELMOR G1436MB GRANULATOR WITH FEED 14098

• Manufacturer: Nelmor

Nelmor model G1436MB granulator. S/N 8907-28788. 14″ x 36″ feed throat, 3 knife solid rotor, 2 bed knife, 75HP 230/460V motor. Forklift base, insulated body panels and feed roll in-feed hopper with 8″ x 13″ side ...

CUMBERLAND 30T PADDLE FEED GRANULATOR 16264

• Manufacturer: Cumberland

Cumberland model 30T under the press granulator, S/N 9600-88033. 8″ x 30″ feed throat, 3 knife rotor, 2 bed knife cutting chamber, 10 HP 208-230/460-volt 1160 RPM rotor motor. Feed roll driven by rotor motor tran...

NELMOR G1220M1 GRANULATOR 16132

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 7312-6716. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife. 25HP 230/460V 1,765 RPM motor. Single wall tray feed hopper, gravity barrel discharge through approximately...

NELMOR G12295M1 GRANULATOR 16897

• Manufacturer: Nelmor

Nelmor model G12295M1 granulator. S/N 8912-28691. 12″ x 29.5″ feed throat, 2 knife open rotor, 2 bed knife. Dual 15HP 230/460V 1,755 RPM motors. Rear facing double wall tray feed hopper with 5.5″ x 35″ side feed ...

CUMBERLAND 1456i GRANULATOR W/FEED ROLLS 18718

• Manufacturer: Cumberland

One (1) used Cumberland model 1456i granulator. S/N 8400-81004. 14″ x 56″ feed throat. Three (3) knife twin shear rotor with two (2) bed knifes. Rotor is belt driven by a 75 HP motor. 68″ wide in feed pull rolls ...

WEIMA ZMK60 SHREDDER WITH GRANULATOR 18272

• Manufacturer: Weima

Used shredder / grinder combination system including the following:Weima four shaft shredder model ZMK60 with dual 25 HP 460-volt motors and controls. Has a 74″ x 55″ hopper opening narrowing to a 27″ x 50″ wide ...

PALLMAN 4-7.5 RUBBER GRANULATOR 18882

• Manufacturer: Pallmann

Pallman “Ultra-Granulator” type PS, series C knife mill. Model 4-7.5. 20″ x 29.5″ feed throat entrance (510 mm x 750 mm). 400 mm diameter guillotine style rotor with three (3) rotating knives and two (2) fixed be...

REBUILT RAPID 600C GRANULATOR 18745

Rapid model 600C granulator. S/N 50.2644. 12″ x 24″ feed throat. 8 knife staggered rotor with 3 bed knives. Dual Fly-wheels. 50 HP 460-volt motor. Tray feed hopper with tray magnet. 6″ OD rear facing airveyor dis...

REBUILT NELMOR G3030HD GRANULATOR 18484

• Manufacturer: Nelmor

Nelmor model G3030HD granulator. S/N 9606-37721. 30″ x 30″ feed throat. 5 knife rotor with knife carriers, 2 bed knife. Dual Fly-wheels. Tangential cutting chamber. 100 HP 230/460-volt 1181 RPM motor. Insulated l...

REBUILT CUMBERLAND 584 GRANULATOR W/SIDE 17980

• Manufacturer: Cumberland

Cumberland model 584 granulator. S/N 335000-93010. 14″ x 20″ feed throat. 3 knife open rotor, 2 bed knife. 20 HP 230/460-volt motor. Left hand insulated side feed hopper at a 48″ in-feed height. Insulated body pa...

NELMOR G3036M2 GRANULATOR 4494

• Manufacturer: Nelmor

Nelmor G3036M2 granulator, S/N 7604-8858. 10 knife staggered hog rotor, 2 bed knife, 30″ x 36″ feed throat, mounted on a forklift base. Hydraulically assisted cradle side feed hopper, twin 125HP 460V 1,140 RPM mo...