Used Drilling Rigs in Kentucky, USA

2018 JUNJIN JD-800EII

• Manufacturer: Junjin
• Hours: 6,132 h

2018 JUNJIN JD-800EII CRAWLER VERTICAL DRILL, Cummins QSB6.7 Tier 4 Motor, 175hp, 6132 Hours, EROPS, AC, Backup Camera, Yamamoto YH80A Drifter with 2199 Hours, Kawasaki Variable Piston Hydraulic Pump, Carousel Ty...

1999 SANDVIK D45KS

• Manufacturer: Sandvik
• Model: D45KS
• Hours: 26,358 h

1999 SANDVIK D45KS VERTICAL DRILL, Cat 3406E, 450hp, 26358 Hours, 29.5" Tracks, 60%, EROPS, Heat/AC, 95' 3x30' Drill, 6 3/4" Drill Bit, 1050/100 Air, Drill Has Been Gone Through Top to Bottom, Too Many New Parts ...

2005 ATLAS COPCO ECM660 III

• Manufacturer: Atlas-Copco
• Model: ECM 660 III
• Horsepower: 260 hp
• Drill Pipe Diameter: 51 mm

Montabert HC160 Drifter Setup for T45 Cummins Diesel Engine Unit shows 2,307 engine hours, we estimate approximately 12,307 total frame hours 3,949 Percussion hours

2004 ATLAS COPCO ECM660 III

• Manufacturer: Atlas-Copco
• Model: ECM 660 III
• Horsepower: 260 hp
• Drill Pipe Diameter: 51 mm

3.5 – 4.5 Inch Class Montabert HC160 Drifter Very Well Maintained Unit 7036 Total Frame Hours 2251 Percussion Hours

1998 Ingersoll Rand DM-45E

• Manufacturer: Ingersoll Rand
• Model: DM-45E
• Horsepower: 600 hp
• Hours: 500 h

Used Ingersoll Rand DM-45E Rock Drill for sale. CAT® 3406B -Remanufactured Engine -Final drive needs repair -Hydraulic pumps need replacing

2005 INGERSOLL_RAND ECM 370

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

1984 INGERSOLL-RAND CM351

• Manufacturer: Ingersoll Rand
• Model: CM-351

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

2015 EPIROC FLEXIROC D60

• Manufacturer: Epiroc

DTH Class* Cat C15 Tier 4 Final Diesel Engine * Drill Pipe: 16’ft pipe x 4” x 2-7/8” REG API Thread. Very Good Condition This rig has 9800 engine hours and 6000 impact hours.

GILL BEETLE

DTH Class Drills Holes 4 to 24 in Diameter Able to Drill Holes Vertically, Horizontally, and Every Angle in Between Has a Hydraulic table for up to 9 opening IR-360 DTH Hammer w/ Bits 8.5 and 7.5 IR-350 DTH Hamme...

2020 Sandvik DP1500I

• Manufacturer: Sandvik
• Model: DP1500
• Operating weight: 23,000 kg

2,295 total hours & 1,015 percussion hours Cat C13 Tier 4 Diesel Engine Drifter / Rock Drill is a RD1635CF Excellent condition

2008 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 385 hp
• Drilling depth: 29.5 m

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours

2008 INGERSOLL-RAND ECM720

• Manufacturer: Ingersoll Rand
• Model: ECM-720
• Horsepower: 385 hp
• Drilling depth: 30 m

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours

2013 MONTABERT MICRO CPA360

• Manufacturer: Montabert

Montabert Micro CPA Package Bobcat Mini Excavator E60 w/ 600 Hours HB980 Hydraulic Breaker w/ 120 Hours Doosan P185WJD-T4i Portable Air Compressor w/ 84 Hours Hydraulic Clamp, E60 Micro CPA Drilling Attachment Th...

1993 INGERSOLL-RAND DML

• Manufacturer: Ingersoll Rand

4.5 – 5.5 Inch Class CAT 3412 Diesel Engine w/ Only 1,500 Hours Since Rebuild Runs 30ft Drill Steel High Pressure Unit w/ On-Board IR HR2 1050 CFM / 350 PSI New Pump Drive and Double Motor Spur Gear Head

2011 FURUKAWA HCR900ES

• Manufacturer: Furukawa
• Model: HCR900ES
• Horsepower: 225 hp
• Machine weight: 202 kg

2.5 – 3.5 Inch Class HD709 Drifter w/ 1545 Percussion Hours CAT 3126 Diesel engine w/ 3118 Hours Extendable boom Single-Lever Drilling Controls Design Versatility Allows for Drilling either Horizontally or Vertic...