Used Processing in Bremen, Germany

1400 liter tank with foldable lid-cover, Aisi 304

remarks: tank with internal fixtures and slight metallic discolourations

1000 liter conical tank, Aisi 316 with pump system

Volume: 1.000 liter | Lower bottom: conical bottom | Stand type: on wheels moveable cage | Diameter inside: 1.320 mm | Cylindrical height: 550 mm | Total height: 2.400 mm | Total width: 1.350 mm | Total length: ...

1100 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: former support brackets were cut off by dismantling and are not available anymore; 1 heating connection cut...

1000 liter heat-/coolable tank, AISI 304

Temperature control cylinder (dj): double jacket remarks: Behälterauslauf ragt über Behälterfüße hinaus, Behälter müsste zur Aufstellung entsprechend unterfüttert werden; 1 loses Fußgestell aus Normalstahl gehört...

1000 liter tank, Aisi 304

remarks: Insulating jacket was cut open by the previous operator and later stapled back together; 2 sheet metal cutouts in the container lid (see photos)

950 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): half-coil temperature control bottom (dj): half-coil notice: some residues of previous content, dents at the insulation jacket remarks: frame with platform made of mild steel be...

1100 liter pressure tank, Aisi 304

• Manufacturer: Waldner

max. allowable working temperature: 50 °C EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

780 liter storage tank, AISI 316

remarks: baffle st. st. inside (see pictures); pump included in delivery (see pictures); 2 rectangular openings 300 x 400 mm on the tank; outer dimensions tank frame appr. 2990 x 750 mm

650 liter electropolished rectangular pharma tank, Aisi 316

remarks: internal (moveable) fixtures; the outlet was probably fitted with a fitting, but this is no longer available (see photos)

630 liter heat-/coolable agitator tank, Aisi 304 with inclined blade agitator

max. allowable working overpressure (dj): 1.0 bar Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket

560 liter heat-/coolable agitator tank, Aisi 316 with propeller agitator

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 10.0 bar max. allowable working temperature (dj): 150 °C Temperature control cylinder (dj): half-coil temperature control botto...

550 liter ex-proof agitator vessel, AISI 304

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

720 liter heat-/coolable pressure tank, Aisi 316

• Manufacturer: Schmidding Werke

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): half-coil temperature control bottom...

650 liter heat-/coolable pressure tank, Aisi 304

• Manufacturer: B.V. SPECIAAL ROESTVRIJSTAAL-INDUSTRIE

max. allowable working temperature: 170 °C max. allowable working overpressure (dj): 8.0 bar max. allowable working temperature (dj): 170 °C Temperature control cylinder (dj): half-coil temperature control bottom...

540 Liter heat-/coolable pressure tank, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 130 °C max. allowable working temperature (dj): 130 °C Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of ...