Used Hydraulic Presses in Canada

PN Series Mechanical Power Press Machine

Hydraulic c-type pressing machine with sturdy carbon steel frame and cast table. Great shop machine for any general stampping manufacturing , for example blanking, piecing, forming, drawing , bending and more The...

Pro Series Hydraulic Press Bake

The Pro Series Hydraulic Press Bake is designed to deliver exceptional performance and user satisfaction. To further enhance the operator’s experience, this Pro Series Hydraulic Press Bake offers an optional user...

50 ton Hydraulic Press, straightening and general work

Equipped: Side Travel of Press Head, full length of bed, fingertip control. SOLID STEEL HEAVY DUTY BED, warp free Safety Guards (2) on front and back, vertical lift, balanced Fingertip Controls for all motion fun...

300 ton Deep drawing press, 48in. stroke, ‘Fielding’ Good Brt. press.- REDUCED!

• Manufacturer: Fielding (UK)
• Capacity: 300,000 kg

"Used, piping and circuits will require a clean up. The press is intact, currently off site stored on a truck ready for shipping!" 300 ton Deep Drawing 48in. stroke, Hydraulic Press, downstroke The frame is of al...

DANIELS” 75 Ton HYDRAULIC PRESS, Downstroke

• Manufacturer: Daniels

Specifications: 14″ x 17″ T-slotted bed and ram, 14″ x 14″ hot platens, ejectors, variable pressure control, integral hydraulics, DIMENSIONS: PRICE, Fob warehouse no.1...... Reduced, now- $9,500 USD 75 Ton Hyd. P...

300 TON FIELDING HYDRAULIC PRESS with Prefill (DOWNSTROKE)

• Manufacturer: Fielding (UK)
• Capacity: 300,000 kg

(or BEST OFFER) The frame is of all-steel fabrication and is designed and constructed to ensure the minimum amount of deflection under the most arduous working conditions. It consists of two one piece side plates...

2010 MACRODYNE MPS-50

• Manufacturer: MACRODYNE

**NEW PRICE** $59,500 $39,500 MACRODYNE (2010) MPS-50, 50-ton capacity 4 post hydraulic spotting press with PLC control, 53” stroke, 63” daylight opening, 65” x 42” tilting platen, left to right 65” x 42” shuttle...

2001 SUTHERLAND SD3-300-84-48-C

• Manufacturer: Sutherland
• Model: SD3-300-84-48-C
• Capacity: 300,000 kg
• Shut height: 304.8 mm

2001 Sutherland SD3-300-84-48-C Hydraulic Press, 300 Ton, Allen Bradley Control, Linear Scale Position Control, Denison Vane Pump, Light Curtains

20 Ton Hydraulic Press

Lot #: 117

1998 EAGLE, Hydraulic, 4 Post PRESS 200 Ton capacity

• Manufacturer: Eagle
• Model: PH2-200-118-48
• Capacity: 200,000 kg

MODEL ph2-200-118-48 FEATURES: Floor standing Allan Bradley PanelView 550 control 250 gallon reservoir CONDITION: Pre-Owned If you can't find the exact pre-owned machine you're looking for in our current inventor...

UNUSED HYLATECHNIK Shock Dampers 35 ton capacity (set of 4) Model SHYC-H 35-20

• Stroke length: 20 mm

FEATURES: Complete with 4 adjusting nuts (one per damper) Built in Hydraulic tank on each damper Demo model, never used in production If you can't find the exact pre-owned machine you're looking for in our curren...

HOFER HOP 160 K COLD PRESS (HYDRAULIC) [PC-010771]

• Manufacturer: Höfer

HOFER HOP 160 K Hydraulic Door/Veneer Heavy Duty Cold Press Specifications: Platen size 63" deep x 98" long, Total Daylight/Opening 32".available. Currently set at about 13" opening. Top platen is hydraulically p...

STETON P 150/C HYDRAULIC COLD PRESS [PC-010779]

• Manufacturer: Steton

STETON - P150C: (2) Platen Cold Press (was built as a Hot Press, but heating does not work!) -- Approx.: 118" x 51" (3,500 x 1,300 mm) Overall platen size; side loading on: 118" Side. Pressure from bottom: 2 HP H...

Forano Resaw Outfeed / Belt and Side Press Roll

• Manufacturer: Forano

- Infeed belt 16" wide belt 24" wide trough - No drive - Air operated side press roll c/w hydraulic motor - 12" diameter slow down roll - Used to hold pieces for vertical sawing 6" opening