Used machinery

Trusted Seller
PRUTTON 75A-24
- used
- Manufacturer: Prutton
- Model: 75A-24
Capacity: #4 Screws to 1/4" | Maximum thread length: 2" | Maximum length under head: up to 3" | Overall nail blank lengths: up to 2-1/2" | Speed range: up to 600 PPM | Approx. weight: 2500 lbs | Approx. floor si...
Ivyland, PA
Trusted Seller
WATERBURY FARREL #20
- used
- Manufacturer: Waterbury Farrel
- Model: 20
Maximum thread diameter: 3/8" | Maximum thread length: 5" | Maximum speed: 60 SPM | Approx. weight: 5,000 lbs | Equipped with: With Adjustable PitmanSpecial 5" Deep Die PocketSet For Wire Feed - Can Be Removed
Ivyland, PA
Trusted Seller
TESKER 840
- used
- Manufacturer: TESKER
Diameter: Max Diameter 15" (380mm) | Rolling pressure: 500,000 LBS Continuous / 600,000 Intermittent | Spindle diameter: 5 1/2" (139mm) | Die face (maximum): 15" (380mm) | Die diameter (maximum): 16" (400mm) | S...
Ivyland, PA
Trusted Seller
HARTFORD A-190-M
- used
- Manufacturer: Hartford
- Model: A-190-M
Thread length capacity: 1/8" to 1-1/2" | Screw diameter capacity: #0 thru #10 | Die pocket depth: 1-5/8" | Maximum speed: 175 PPM | Motor: 3 HP | Approx. floor size: 4' x 5' | Approx. weight: 1,600 lbs
Ivyland, PA
Trusted Seller
HARTFORD 20-225
- used
- Manufacturer: Hartford
- Model: 20-225
Screw diameter capacity: 1/4" thru 1/2" | Maximum thread length: to 3" | Thread length at max. diameter: 1-1/2" | Maximum shank length: 4" | Production rate: 135 - 225 PPM | Die pocket depth: 3-1/8" | Flat die s...
Ivyland, PA
Trusted Seller
MANVILLE #70 1000-C
- used
- Manufacturer: Manville
Maximum thread diameter: 1-1/4" | Depth of die pockets: 6-1/8" | Strokes per minute: Approx. 40 | Length of moving die: 20" | Length of stationary die: 19" | Distance between top of die block & bottom of tie rod...
Ivyland, PA
Trusted Seller
KINEFAC MC-4 CNC 2- Roll
- used
- Manufacturer: KINEFAC
Spindle diameter: 1-1/2" (40mm) | Maximum die width: 2-5/8" (115mm) | Die diameter range: 3 - 4 - 3/8" (75mm - 110mm) | Minimum diameter in or thrufeed: 1/32" (1mm) | Maximum diameter thru feed: 3/4" (20mm) Unli...
Ivyland, PA
Trusted Seller
HARTFORD 190
- used
- Manufacturer: Hartford
- Model: 190
Blank length maximum: up to 1-3/4" | Thread length capacity: 1/8" - 1-1/2" | Screw diameter capacity: #0 (.060") - #10 (.190") | Maximum speed: 175 PPM | Approx. floor size: 4' x 5' | Approx. weight: 1,600 lbs |...
Ivyland, PA
Trusted Seller
1984 WARREN INDUSTRIES WT-1000
- used
- Manufacturer: Warren
- Model: WT-1000
Die requirement: "0" or "00" | Screw diameter capacity: #2 to #12 (1/4") | Speed range: 90 to 1000 PPM | Maximum blank length: Up to 3" | Die pocket depth: 3" | Approx. weight: 4500 lbs | Approx. floor size: 56"...
Ivyland, PA
Trusted Seller
1990 WARREN INDUSTRIES WT-1500
- used
- Manufacturer: Warren
- Model: WT-1500
Die requirement: "0" or "1015" | Screw diameter capacity: #2 thru #12 (1/4") | Speed range: 90 to 700 PPM | Maximum blank length: Up to 3" | Die pocket depth: 3" | Approx. weight: 4,500 lbs | Approx. floor size:...
Ivyland, PA
Trusted Seller
1980 KINEFAC MC-5-F
- used
- Manufacturer: KINEFAC
Maximum infeed diameter: 2" | Spindle diameter: 2" | Maximum diameter thru feed: 1-1/2" | Die length: 4" | Electrics: AC Motor and Controls | Approx. weight: 3,000 lbs | Equipped with: Hydraulic Pump and TankCoo...
Ivyland, PA
Trusted Seller
KINEFAC MC-5-F
- used
- Manufacturer: KINEFAC
Maximum infeed diameter: 2" | Maximum thread die length: 2-1/4" | Spindle diameter: 2"
Ivyland, PA
Trusted Seller
HARTFORD 4-600
- used
- Manufacturer: Hartford
- Model: 4-600
Diameter: through 1/4" | Maximum shank length: 3" | Thread length (maximum): 2" | Production: 200 - 600 PPM | Electrics: 7 1/2 HP AC Motor & Controls | Approx. weight: 5700# | Approx. floor size: 5'2" x 6'8" | E...
Ivyland, PA
Trusted Seller
HARTFORD 4-600
- used
- Manufacturer: Hartford
- Model: 4-600
Diameter: through 1/4" | Maximum shank length: 3" | Thread length (maximum): 2" | Production: 200 - 600 PPM | Electrics: 7 1/2 HP AC Motor & Controls | Approx. weight: 5700# | Approx. floor size: 5'2" x 6'8" | E...
Ivyland, PA
Trusted Seller
1986 TESKER 30
- used
- Manufacturer: TESKER
Capacity: 5/8" Maximum Diameter | Rolling pressure adjustable to: Fixed | Motors spindle drive: 15 HP | Hydraulic coolant: 1/4 HP | Maximum diameter (dies): 4-7/8" | Maximum die face width: 3" | Standard spindle...
Ivyland, PA