Used Processing in New Jersey, USA

Mixer-Disperser 2.6 kW (3.5 HP) - IPP# 219081

• Manufacturer: Fluid

mobile disperser 25mm diameter x 800mm long stainless steel shaft with a 150mm diameter sawtooth blade Motor: 290/500 volt manual rasie/lower mechanism

Mixer-Disperser 17.5 kW (23.5 HP) Stainless Steel Austenitic - IPP# 219063

• Manufacturer: Drais

disperser/disolver 50mm diameter x 800mm long shaft with 350mm diameter double saw tooth blade 470-1700 rpm shaft speed built on controls, with bowl holding/clamping mechanism, can use 250 ltr upt to 600 ltr bowl...

Mixer-Continuous 55.9 kW (75 HP) Stainless Steel 304 - IPP# 92819

• Manufacturer: Baker Perkins

ko-kneader kneading chamber. Cored shaft, jkt chamber

Mixer-Continuous 37.3 kW (50 HP) Stainless Steel 304 - IPP# 23133

• Manufacturer: Strong Scott

Unit driven by Reeves varidrive 50 HP, max 1222 rpm, min 132 rpm. 14" dia x 42" low chamber. Drop door style. Packing gland on shaft.

Mixer-Continuous 65 kW (87.2 HP) - IPP# 99779

• Manufacturer: Buss

****Buss kneader Oil pressure 6 bar @ 250 deg C water pressure 20 bar @ 200 deg C SS screw cored for steam heating, screw 140mm dia screw casing w/hinge (2) heating zones, (1) cooling zones. Screw driven by Mille...

Mixer-Continuous Stainless Steel 304 - IPP# 20615

• Manufacturer: Bepex

continuous Solidaire non-jkt paddle mixer. Agitator is lined w/small flat adjustable pitched paddles. Outboard bearings on shaft. Openings: top 2-13 1/2", hd 1-4". No drive w/unit.

Mixer-Continuous 18.6 kW (25 HP) Carbon Steel - IPP# 220808

• Manufacturer: Littleford Bros, Inc

Stainless Steel 304 Strong Scott TS-14 Mixer-Continuous - IPP# 23132

• Manufacturer: Strong Scott

turbolizer Size 661-K min 382 rpm 14" dia x 42" long chamber Drop door style. Packing gland on shaft.

Mixer-Continuous 10 kW (13.4 HP) Stainless Steel 904 - IPP# 207108

• Manufacturer: List (Switzerland)

25 Liter Double Shaft Kneader Mixer with 1.4306 s/steel Double wall jacket internal -1/+0,5 bar hydraulic drive

Mixer-Continuous 15 kW (20.1 HP) Stainless Steel - IPP# 217876

15 ton/hr stainless steel horizontal conical continious mixer with integrated nozzles for adding up to 3 components into the powder, for mixing and agglomeration spocket wheel / chain driven (2) trunions, additio...

Mixer-Charge Can and Pony 5.5 kW (7.4 HP) Stainless Steel Austenitic - IPP# 93028

• Manufacturer: Drais

Top reaction chamber pressure rated 2.4 bar/full vacuum jacket volume 57 ltr, serial # 2334 chamber pressure rated 2.5 bar/full vacuum internal Bottom has casters and is hydraulically flanged to upper chamber par...

Mixer-Charge Can and Pony Stainless Steel 304 - IPP# 220911

• Manufacturer: Ross

sanitary stainless steel construction 0.78 to 1.5 gallon mixing capacity with side bottom outlet with valve, (1) planetary mixing blade, (1) high speed dispersing blade, with explosion proof drive motors and digi...

RO and Ultra RO Filter Carbon Steel - IPP# 245822

• Manufacturer: Protecno

feed rate 27.50m3/hr, raw water flow to system 27.50 m3/hr, feed pressure 14.19 bar, flow factor 0.85, permeate flow 21m3/hr, recovery 76.36%, feed temperature 5 degrees C, feed TDS 408.99 mg/l, osmotic pressure ...

RO and Ultra RO Filter Stainless Steel 316 - IPP# 238450

• Manufacturer: Permionics Global technologies LLP

product contact, MF,UF, RO system Design parameters of the MF system feed flow is ~ 6.5 Kl./hr. with a permeate flow of ~6.0 Kl./Hr. Bleed out(reject) rate is 0.5 Kl./Hr Design parameters of the UF system, 10 kg/...

RO and Ultra RO Filter Carbon Steel - IPP# 213577

• Manufacturer: Membrane systems

reverse osmosis skid With six Code line chambers 1.5" inlet line rated for 40-70 degrees F inlet at 60 psi max.