Used Processing in Flanders, Belgium

1987 Arvor 1182 GGL

• Manufacturer: Arvor
• Model: 1182 GGL

Bottom weld bag making machine Bottom seal with flying knife Sealing wires on top and bottom seal bar Blocked bags system Unwind with 2 positions 4 roll dancer with infeed motor and rubber infeed roll with nip ro...

2003 ITALWORK Galaxy 1000

220 – 380 Volt – 50Hz The machine can produce standard sideweld bags, can also make side weld bags with inside sealed patch handle, or side weld bags with a loop handle sealed on the bag The side weld sealing bar...

1978 Arvor 872 BB

• Manufacturer: Arvor

Bottom seal machine with flying knife Unwind stand with mechanical shaft + cones + mechanical brake system Adjustable roller system to position the print (offset system) Photocell for printed film Clutch and brak...

1987 Kiefel Rotex 30 S

• Manufacturer: Kiefel

Blown film extruder For the production of LDPE – MDPE & LLDPE film The extruder and rotating film blowing head are mounted in the top of the tower The film is blown from the top of the tower to the winder on the ...

1994 Stiegler US-S 800

• Manufacturer: Stiegler

Side sealing machine 380 V, 50 Hz Servo motor for bag feeding (original servo system made by Stiegler) Sealing bar for PP and thin LDPE equiped with thermocouple Sick photocell for printed film 2 x Stiegler perfo...

1974 Arvor 872 GL

• Manufacturer: Arvor

Bottom seal machine with flying knife Unwind stand with 2 positions and 2 shaft of 25mm + 4 cones Sealing bar and flying knife in good condition Clutch and brake in good condition All rubber rollers in good condi...

1982 Hudson Sharp MS 750

• Manufacturer: Hudson-Sharp
• Model: MS 750

Side seal machine renewed in 2015 Completely mechanical and electrically overhauled & renewed in 2015 3x400V, 50Hz Scae unwind shaft driven, 140cm wide Air shaft 76mm with 2 safety Boschert chucks 4 roll dancer t...

2013 Clint CWW/K/WP 453-P water cooled liquid chiller

• Manufacturer: Clint
• Model: CWW

NEW !! Never been used. Clint CWW/K/WP 453-P Cold carrier: Water | Cooling agent: R410A | Cooling power: 149,5 KW | Temperature of condensation: 30/35 degrees C | Temperature of the cold carrier: 7/12 degrees C |...

Plast-Control Magicflow K400

• Manufacturer: Plast-Control
• Model: Magicflow

1970 Stiegler T800

• Manufacturer: Stiegler
• Model: T800

Side sealing machine Clutch and brake machine Sealing bar for LDPE & PP Stacking table unwind

1967 Stiegler TS800

• Manufacturer: Stiegler
• Model: TS800

Side sealing machine 380 V 50 Hz 2,5 kW Unwind stand in line with 2 positions + 2 mechanical shafts Clutch and brake 1 side seal bar for LDPE 1 side seal bar for PP (polypropylene) Pick off section Stacking table

2001 Arvor 1199 Classic

• Manufacturer: Arvor
• Model: 1199 CLASSIC

Bottom seal machine with flying knife

2003 Italwork folding triangle

Unwind + folding triangle 1500mm Motor driven unwind (Lenze) Airshaft 4 roll dancer Photo electric edge guide system from ( Erhardt & Leimer) Tension control system (E&L) Adjustable folding triangle on top Unit i...

FMC M75

• Manufacturer: FMC
• Model: M75

Wicket machine

Dolci 45KV

• Manufacturer: Dolci

Blown film extruder Breaker plate type screen changer Fixed head with single flow air ring 100mm die insert Nip roller unit 800mm wide Kween B corona treater Single rewind with manual roll change