Agriculture » Applicators » Pull-type Applicators

Search By Manufacturer

Search By State

Building Filters

778

Used Pull Type Applicators

  • CHD Eefting FG 9145 #300262521

    CHD Eefting FG 9145 #300262521

    • Manufacturer: CHD Eefting

    FG 9145 (0010) Used CHD trailed field sprayer (0020) 9,100 ltr. scalding tank (0030) 650 ltr. fresh water tank (0040) 45 mtr. boom width foldable to 39 mtr. and 27 mtr. (0050) 17 boom sections (0060) Steering axl...

    $85,593 USD
    Meppen, Germany
  • 2017 CHD Eefting F7039A #300396953

    2017 CHD Eefting F7039A #300396953

    • Manufacturer: CHD Eefting

    F7039A (0010) used CHD trailed field sprayer (0020) Top hitch, cardan shaft, (0030) input gearbox 540 rpm, (0040) hydraulic support foot, (0050) 2 circuit air brake system, (0060) pneumatically sprung steering ax...

    $58,588 USD
    Meppen, Germany
  • 2006 Hardi 2800LPY

    2006 Hardi 2800LPY

    • Manufacturer: Hardi

    4 sections, adjustable axle in row spacing, Inspected 2024

    $24,337 USD
    Kumla, Sweden
  • 2025 Lemken POLARIS 14/2500 #300263333

    2025 Lemken POLARIS 14/2500 #300263333

    • Manufacturer: Lemken
    • Model: POLARIS 142500

    POLARIS 14/2500 Lemken mounted fertilizer spreader In standard equipment additionally with: Sensor level monitoring: electronic Separator plates: for crystalline fertilizer & grass seed Parking support: removable...

    $21,721 USD
    Alpen, Germany
  • 2010 Lemken ALBATROS 9/5000 #300005004

    2010 Lemken ALBATROS 9/5000 #300005004

    • Manufacturer: Lemken
    • Model: Albatros

    ALBATROS 9/5000 used Lemken field sprayer boom B 30/33m equipment check Tüv 40km/h Tank-Control Mudguard 600mm Sprung drawbar end piece Trail-Control steering Electro-hydraulic operation Raise-lower Linkage reduc...

    $28,766 USD
    Alpen, Germany
  • 1996 Douven GP4 #300009075

    1996 Douven GP4 #300009075

    • Manufacturer: Douven
    • Model: GP4
    • Boom width: 27 meter

    GP4 used Douven field sprayer 3400 liter tank capacity 27m boom full computer Tires 18.4 R 38 steering Fresh water tank Flushing device Contact person: Dominik Wolters +49 (0) 2802 9480-11 (Deutsch/English) / St...

    Alpen, Germany
  • 2000 Dammann ANP 4033 #300268852

    2000 Dammann ANP 4033 #300268852

    • Manufacturer: Dammann
    • Model: ANP 4033

    ANP 4033 used Dammann sprayer Boom: 33 m, two-piece foldable Tank capacity: 4,200 l Fresh water: 400 l Nozzle spacing: 50 cm 05 Nozzle Tracks: 2.25 m or 1.85 m Slope compensation electro. pneumatic Induction slui...

    $7,280 USD
    Alpen, Germany
  • 2024 Lemken POLARIS 14/3000 #300057537

    2024 Lemken POLARIS 14/3000 #300057537

    • Manufacturer: Lemken
    • Model: POLARIS 143000

    POLARIS 14/3000 Lemken fertilizer spreader with standard equipment, additionally with Spreading width: 24-36 m HR spreading vanes TRIBORD 3D, right electro. Fill level monitoring 3000 liter hopper Dismountable su...

    $19,373 USD
    Alpen, Germany
  • 2006 John Deere M 724

    2006 John Deere M 724

    • Manufacturer: John Deere
    • Model: M 724

    REGULATION DPAE PINTAJETROUES11.2R48 ET 480/70R38 Boom width: 28 m | Capacity: 2,500 L

    $21,130 USD
    Toucy, France
  • 2014 Gaspardo CAMPO 30 #300457621

    2014 Gaspardo CAMPO 30 #300457621

    • Manufacturer: Gaspardo
    • Boom width: 27 meter

    CAMPO 30 (0010) Used Kverneland CAMPO 30 (0020) Variant 32 P (0030) Hitch: Drawbar (0040) Operation: ISOBus (0050) Boom width: 27 (0060) Hydr. control single-acting: Yes (0070) Tank design: PE (0080) Tank volume:...

    $22,191 USD
    Meppen, Germany
  • 2012 Rauch AXIS 30.1 #300396710

    2012 Rauch AXIS 30.1 #300396710

    • Manufacturer: Rauch
    • Model: AXIS 301

    AXIS 30.1 0010 used Rauch AXIS 30.1 fertilizer spreader 0020 Three-point linkage, PTO shaft, 0030 Input gearbox 540 rpm 0040 Spreading discs 12-35 meters, 0050 hydraulic shutters, border spreading device, 0060 ho...

    $5,753 USD
    Meppen, Germany
  • 2008 Berthoud TENOR 35/37 DP

    2008 Berthoud TENOR 35/37 DP TRONIC

    • Manufacturer: Berthoud
    • Model: Tenor

    COUPURES DE 7 TRONCONS PAR GPS CORRECTEUR DE DEVERS ESSIEU SUSPENDU ACTIFLEX ROUES 300/95R46

    $16,435 USD
    Toucy, France
  • 2006 Caruelle OLYMPIA 400 S

    2006 Caruelle OLYMPIA 400 S

    • Manufacturer: Caruelle
    • Model: OLYMPIA 400 S
    • Tank capacity: 3,200 liter
    • Boom width: 28 meter

    CUVE DE RINCAGE INCORPORATEUR 5 TRONCONS ROUES 300/95R46 GARDE-BOUES

    $10,565 USD
    Toucy, France
  • 2007 Amazone UX 4200 SPECIAL

    2007 Amazone UX 4200 SPECIAL #300033719

    • Manufacturer: Amazone
    • Model: UX4200

    UX 4200 SPECIAL 0010 branded Amazone field sprayer 0020 Top hitch PTO shaft 0030 Input gearbox 540 rpm 0040 2-circuit compressed air system 0050 Sprayer boom Super "L" 0060 24 m - foldable to 18 m 0070 1-fold noz...

    $25,244 USD
    Meppen, Germany
  • 2010 CHD Eefting CHD 40/33

    2010 CHD Eefting CHD 40/33 #300457107

    • Manufacturer: CHD Eefting

    CHD 40/33 CHD trailed field sprayer Tank volume: 4000 liters Boom 33 m Section widths: 11 pieces Section-Control Drawbar steering Hitch with K80 ball head Tires: 520/85 R38 Stopping lights on the linkage Contact...

    $32,288 USD
    Alpen, Germany
3031323334

Overview

Pull-type applicators are agricultural equipment designed to be towed behind a tractor. They are used to apply fertilizers, herbicides, pesticides, and other treatments to crops and soil. These machines are highly efficient for large-scale farming operations, ensuring even distribution of materials over extensive areas, which helps in optimizing crop yield and health.

FAQ

What should I consider when buying a used pull-type applicator?

Check the overall condition, including the frame, hoses, nozzles, and pump. Ensure there are no leaks or wear and tear that could affect performance. Review any maintenance records available.

How do I safely transport a pull-type applicator?

Use a flatbed trailer and secure the applicator properly to prevent movement during transit. Ensure all moving parts are locked and protected to avoid damage.

What maintenance is required for a pull-type applicator?

Regularly inspect and clean nozzles and hoses, check for leaks, and ensure the pump is functioning correctly. Lubricate any moving parts and follow the manufacturer's maintenance schedule.