- Trusted Seller
12.5" x 20" MONARCH "10EE" TOOLROOM PRECISION ENGINE LATHE w/TAPER ATTACHMENT - TOOLING
- Manufacturer: Monarch
- Model: 10EE
- Spindle bore: 31.75 mm
12.5" x 20" Monarch "10EE" Toolroom Precision Engine Lathe - Mitutoyo DRO - Updated Dura "Plus" Drive - Taper Attachment - Tooling Including Collets - Collet Chuck - Chucks - Centers - Steady Rest - ETC Imperial ...
- Trusted Seller
MONARCH 36NN #0889225
- Manufacturer: Monarch
- Model: 36NN
Swing over bed: 54" | Swing over cross slide: 36" | Distance between centers: 228" | Spindle speeds: 42-202 | Chuck diameter: 39" 4 JAW | Thru hole: 2" | Taper attachement: YES | Steady rest: YES, 16", 12", FOLL...
Toledo, OH - Trusted Seller
MONARCH 62 #0628822
- Manufacturer: Monarch
- Model: 62
- Spindle bore: 50.8 mm
3 Swing over ways: 18" | Swing over carriage: 12" | Distance between centers: 60" | Spindle speeds: 14 TO 1750 RPM | Spindle hole: 2" | Threads: 2 TO 120 TPI | Feeds: .0011 TO .0683 | Jaw chuck: 12" | Steady rest...
Toledo, OH - Trusted Seller
1966 Monarch 10" x 20" Super Precision Toolroom Lathe 10EE
- Manufacturer: Monarch
- Model: 10EE
Equipped with: 3 jaw chuck Taper attachment Maximum swing over bed: 12-1/2" | Distance between centers: 20" | Swing over cross slide: 7-1/4" | Spindle speeds: 25-1750 RPM | Spindle through hole: 1-13/32" | Tape...
- Trusted Seller
12.5” x 20” Monarch 10EE Precision T0olroom Lathe
- Manufacturer: Monarch
- Model: 10EE
- Spindle bore: 44.45 mm
12.5” x 20” Monarch 10EE Precision T0olroom Lathe Features In Like New Condition Taper attachment 3-jaw chuck 4 jaw chuck 6-jaw chuck Faceplate English & metric threading Microcarriage stop Thread dial Specificat...
Granger, IA - Trusted Seller
1980 MONARCH 613
- Manufacturer: Monarch
- Model: 613
TAPER TURNING ATTACHMENT FLAME HARDENED BED FOURWAY RAPID TRAVERSE 21" DIAMETER 4-JAW CHUCK 6" CAPACITY ROLLER TYPE STEADY REST 12" CAPACITY ROLLER TYPE STEADY REST 18" CAPACITY ROLLER TYPE STEADY REST THREAD DIA...
Huntington, NY - Trusted Seller
16 x 54 in. Monarch Lathe, DRO, Chucks, more
- Manufacturer: Monarch
- Model: 16
"Great condition, well maintained by experienced operators, normal wear from use!" 16″ x 54″ Monarch lathe, FULLY Equipped DRO, Taper, more. EQUIPPED: * Digital Read Out 2 axis * Taper turning attachment * 3 Jaw ...
$4,750 USDMontreal, Canada - Trusted Seller
MONARCH 12" x 20" TOOL ROOM LATHE
- Manufacturer: Monarch
- Model: 10EE
USED "MONARCH" HIGH PRECISION TOOL ROOM LATHE SERIAL # 11339 SWING OVER THE BED 12-1/2" SWING OVER CARRIAGE 7-1/4" DISTANCE BETWEEN CENTERS 20" SPINDLE HOLE 1-13/32" SPEEDS (VARIABLE) FROM 0 to 2,500 R.P.M. D1-3 ...
Miami, FL Monarch Chucker Lathe Threading Tool Over Spindle Attachment ???
- Manufacturer: Monarch
Stantec Sales & Services is Offering the Following Equipment: Monarch Chucker Lathe Threading Tool Over Spindle Attachment ??? All products are as is. No warranties expressed or implied and I expressly disclaims ...
$750 USDLenapah, OK
12” x 20” Monarch Mdl. 10EE Toolroom Lathe
- Manufacturer: Monarch
- Model: 10EE
12" x 20" Monarch Mdl. 10EE Toolroom Lathe - True trace hydraulic tracer attachment, standard cross slide and compound can still be used.
Casa Grande, AZ- Trusted Seller
1959 MONARCH Series 80
- Manufacturer: Monarch
ONE USED - 27”x 24’cc MONARCH Engine Lathe 27” Swing Over Bedways 17” Swing Over Cross Slide Hardways Taper Turning Attachment Inch Threading 3” Spindle thru Hole Spindle Speeds from 4 Way Power Rapid Traverse 2...
Aurora, IL - Trusted Seller
1957 MONARCH Series 60
- Manufacturer: Monarch
- Model: SERIES 60
ONE USED - 22” x 96”cc MONARCH Engine Lathe 22” Swing Over Bedways 14” Swing Over Cross Slide Hardways Taper Turning Attachment Inch Threading 2 1/8” Spindle thru Hole Spindle Speeds from 9.5 to 800 RPM 18” Diam...
Aurora, IL 
MONARCH 610
- Manufacturer: Monarch
- Model: 610
- Spindle bore: 50.8 mm
16" x 30" Monarch 1610 Toolroom Engine Lathe s/n 47723, 10” 3-Jaw Chuck, 2" Spindle Hole, Spindle Speeds 12-1500 RPM, (18) Low Range 12-125 (18) High Range 145-1500 Tailstock, Taper Attachment Threading Flame Har...
- Trusted Seller
1980 MONARCH 613
- Manufacturer: Monarch
- Model: 613
ONE USED - 28” x 192”cc MONARCH Engine Lathe 28” Swing Over Bedways 18” Swing Over Cross Slide Hardways Taper Turning Attachment Inch / Metric Threading 2 1/8” Spindle thru Hole Spindle Speeds from 12 to 1500 RP...
Aurora, IL 
MONARCH 612
- Manufacturer: Monarch
- Model: 612
- Spindle bore: 52.39 mm
17" x 54" Monarch 612 Engine Lathe w/Taper 17" Swing 54" Between Centers Taper Attachment 2" Spindle Bore 12" 4 Jaw Chuck D1-6 Mount Aloris Quick Change Toolpost Spindle Speeds (18) Low Range 14-146 (18) High Ran...
Tip: Enter manufacturer, model or keyword
