Used Electrical Test Instruments

Teseq NSG438
- Manufacturer: Teseq - Schaffner
- Model: NSG438
30 kV ESD Gun Simulator System
$17,559 USD
Farmingdale, NJ
HanDok HDP-660B
- Manufacturer: HanDok
Polarity Tester Cal: Calibration Available | As-is: Unit Sold AS-IS
$1,045 USD
Farmingdale, NJ
Lauterbach LA-7742
- Manufacturer: Lauterbach
Lauterbach LA-7742 JTAG Debugger cable for ARM9 (ICD)
$940 USD
Farmingdale, NJ
Keytek E411
- Manufacturer: KeyTek
Keytek E411 EFT / B Source 4.4KV MAX As-is: Unit Sold AS-IS | Cal: Calibration Available
$10,448 USD
Farmingdale, NJ
Wayne Kerr 3220
- Manufacturer: Wayne Kerr
- Model: 3220
Cal: Calibration Available | As-is: Unit Sold AS-IS
$1,950 USD
Farmingdale, NJ
Rohde and Schwarz ESPI3 (1142.8007.03)
- Manufacturer: Rohde & Schwarz
- Model: ESPI
The R&S ESPI 3 which suitable for all commercial EMI standards in line with CISPR, EN, ETS, FCC, ANSI C63.4, VCCI and VDE, have been specially designed for pre-compliance measurements in development. The aim is t...
$13,125 USD
Farmingdale, NJ
Tektronix TF-BRR-CFD^
- Manufacturer: Tektronix
The TF-BRR-CFD test fixture allows you to phase lock frequency between DUT Transmitter Clock, Oscilloscope , and AWG/AFG sources. Converts DUT Transmitter Clock from 66.666MHz to 10MHz. Product Features: Facilita...
$2,247 USD
Farmingdale, NJ
Anritsu 32E11806B
- Manufacturer: Anritsu
Mechanical Configuration Disassembling/Assembling Cabinet Removing Feet ( 1 to 8 ) Remove the S1/S2/S3 screws and remove the S3 screw of the rear. Removing around cover 10 Remove the four S1 screws ( 1 to 4 ) and...
Farmingdale, NJ
Anritsu 32E11806A
- Manufacturer: Anritsu
Mechanical Configuration Disassembling/Assembling Cabinet Removing Feet ( 1 to 8 ) Remove the S1/S2/S3 screws and remove the S3 screw of the rear. Removing around cover 10 Remove the four S1 screws ( 1 to 4 ) and...
Farmingdale, NJ
Anritsu 32E11805B
- Manufacturer: Anritsu
Mechanical Configuration Disassembling/Assembling Cabinet Removing Feet ( 1 to 8 ) Remove the S1/S2/S3 screws and remove the S3 screw of the rear. Removing around cover 10 Remove the four S1 screws ( 1 to 4 ) and...
Farmingdale, NJ
Anritsu 32E11805A
- Manufacturer: Anritsu
Mechanical Configuration Disassembling/Assembling Cabinet Removing Feet ( 1 to 8 ) Remove the S1/S2/S3 screws and remove the S3 screw of the rear. Removing around cover 10 Remove the four S1 screws ( 1 to 4 ) and...
Farmingdale, NJ
Trusted Seller
Electro Industries Shark 100T-60-10-V3-D-INP10 Multifunction 3.5W Power Meter
Used Electro Industries Shark 100T-60-10-V3-D-INP10 Multifunction 3.5W Power Meter. Voltage Range: 69-347 Frequency: 60 Hz Power Supply: 3.5W ( 18 - 60) VDC For Complete Specs See Nameplate Picture
$180 USD
Millis, MA
Trusted Seller
Genetec-E Solo P/E Laser Power And Energy Meter
Used Genetec-E Solo P/E Laser Power And Energy Meter.
$450 USD
Millis, MA
Keytek ECAT-E508-12P
- Manufacturer: Keytek
Open-circuit voltage: 10/360µs, 50-1100V, -0/+15% in 1 volt steps. Tip and ring outputs independent and isolated to insure true, three-terminal simultaneous testing of up to 12 pair. Waveforms as defined by Telc...
$9,997 USD
Farmingdale, NJ
Keytek ECAT-E502B
- Manufacturer: Keytek
As-is: Unit Sold AS-IS | Cal: Calibration Available
$8,394 USD
Farmingdale, NJ
Anritsu ML2495A Electrical Test Instrument
- Manufacturer: Anritsu
- Model: ML2495A
Good condition Anritsu ML2495A Electrical Test Instruments. Located in USA and other countries. Click request price for more information.
USA