Mitsubishi GOZ26 with milling machine (Hydraulic steering-reverse)
used
- Manufacturer: Mitsubishi
- Model: GOZ26
Hydraulic steering - Reverse - Turbo Movement: 4WD | Motor: Water cooled | Fuel oil: Oil | Cylinders: 3 | Torque: 38 | Length: 2.73m | Width: 1.28m | Height: 1.35m | Front tire: 7-14 | Rear tire: 9.5-24
Athens, Greece
Mitsubishi MT 231 with milling machine (Hydraulic steering wheel-reverse)
used
- Manufacturer: Mitsubishi
Hydraulic steering - Reverse Movement: 4WD | Motor: Water cooled | Fuel oil: Oil | Cylinders: 4 | Torque: 35 | Length: 2.75m | Width: 1.30m | Height: 2.00m to the safety device | Milling width: 1.60m | Front tire...
Athens, Greece
Mitsubishi MMT16 with milling machine (Hydraulic steering)
used
- Manufacturer: Mitsubishi
Power steering Movement: 4WD | Motor: Water cooled | Fuel oil: Oil | Cylinders: 3 | Torque: 24 | Length: 2.05m | Width: 1.05m | Height: 1.19m | Milling width: 1.20m | Front tire: 5-12 | Rear tire: 8.3-20
Athens, Greece
Mitsubishi GS25 with milling machine
used
- Manufacturer: Mitsubishi
- Model: GS25
Movement: 4WD | Motor: Water cooled | Fuel oil: Oil | Cylinders: 3 | Length: 2.71m | Width: 1.10m | Height: 1.95m | Front tire: 6-14 | Rear tire: 9.5-24
Athens, Greece
Mitsubishi MTR300 with milling machine (Hydraulic steering wheel)
used
- Manufacturer: Mitsubishi
- Model: MTR300
safety device Movement: 4WD | Motor: Water cooled | Fuel oil: Oil | Cylinders: 3 | Length: 2.85m | Width: 1.40m | Height: 2.00m at | Milling width: 1.50m | Front tire: 7-16 | Rear tire: 11.2-26
Athens, Greece
Mitsubishi MMT15 with milling machine (Power Steering)
used
- Manufacturer: Mitsubishi
Power steering Movement: 4WD | Motor: Water cooled | Fuel oil: Oil | Cylinders: 3 | Torque: 24 | Length: 2.35m | Width: 1.00m | Height: 1.76m in the safety device | Milling width: 1.20m | Front tire: 5-12 | Rear ...
Athens, Greece
Mitsubishi MT 226D with milling machine (Hydraulic steering wheel-reverse)
used
- Manufacturer: Mitsubishi
Movement: 4WD | Motor: Water cooled | Fuel oil: Oil | Cylinders: 4 | Length: 2.80m | Width: 1.30m | Height: 2.00m on ROPS | Milling width: 1.50m | Front tire: 6-14 | Rear tire: 9.5-22
Athens, Greece
MITUBISHI AQXR214SA20S
used
- Manufacturer: Mitsubishi
Mitsubishi Materials 21mm/Hybrid Mill AQXR214SA20S Flat/side rough/medium rough Cutting edge diameter 21mm, Max. depth of cut 22mm, Shank 20mm, Length under neck 35mm, Total length 130mm, 2 blades 2 steps
Hamamatsu, Japan
MITUBISHI AQXR174SA16L
used
- Manufacturer: Mitsubishi
Mitsubishi Materials 17mm/Hybrid Mill AQXR174SA16L Flat/side rough/medium rough Blade diameter 17mm, Max. depth of cut 17.6mm, Shank 16mm, Length under neck 30mm, Total length 175mm, 2 blades 2 steps
Hamamatsu, Japan
Tip: Enter manufacturer, model or keyword