Used Mitsubishi Injection Molding

1994 Mitsubishi 720MJ-80
- used
- Manufacturer: Mitsubishi
Size: 720 | Shot size: 68.4 oz. | Clamp style: Hydraulic | Platen size: 55.1" x 55.1" | Dbtb: 37.4" x 37.4" | Daylight: Max 70.9" | Hko: Yes | Core pull: Yes | Controls: MAC IV | Voltage: 460/3/60
Valley City, OH
1999 Mitsubishi 1300MMIIIW-240
- used
- Manufacturer: Mitsubishi
- Model: 1300MMIIIW-240
Max. Clamping Stroke- 70.9″ 120 mm Size: 1300 | Shot size: 240 oz. | Clamp style: Hydraulic | Dbtb: 51.2" x 50.4" | Daylight: Max-98.4" | Hko: Yes | Controls: MAC VII
Valley City, OH
2000 Mitsubishi 720 MMJ
- used
- Manufacturer: Mitsubishi
– Screw Dianmeter – 105 mm – Yushin AEXII-600SL-16 3 axis robot included – SPI Robot Interface – 2 Core Circuits
Valley City, OH
2001 Mitsubishi 950 MMJW-160
- used
- Manufacturer: Mitsubishi
3 Core Pulls Size: 950 | Shot size: 160 oz. | Platen size: 70.9" x 66.9" | Dbtb: 51.2" x 47.2" | Hko: Yes | Core pull: Yes | Controls: MAC-VII | Voltage: 480 V | Hours: 76,873 | Clamp stroke: 68.9″ | Max daylight...
Valley City, OH
Trusted Seller
MITSUBISHI 180MJ-17, 16.3 Oz Injection Unit USED
- used
- Manufacturer: Mitsubishi
16.3 Oz Shot Size 1.97" (50 mm) Screw Diameter 28,446 PSI Injection Pressure 10.04" Injection Stroke 260 RPM Screw Speed Removed from: 180 Ton Mitsubishi Injection Molding Machine Model: 180MJ-17 Serial: ...
$3,450 USD
Holly, MI
Trusted Seller
(TESTED) MITSUBISHI PLCS-10 OPERATOR PANEL INJECTION MOLDING MACHINE
- used
- Manufacturer: Mitsubishi
“Pulled from working machine” 🔥(TESTED) MITSUBISHI PLCS-10 OPERATOR PANEL INJECTION MOLDING MACHINE INV# P-1302
$1,000 USD
Henderson, KY
Trusted Seller
MITSUBISHI Plastic Injection Molding Machine Barrel Zone Heating Control Power
- used
- Manufacturer: Mitsubishi
“Pulled from working Mitsubishi Molding Machine” MITSUBISHI Plastic Injection Molding Machine Barrel Zone Heating Control Power Supply Board INV# P-1327
$200 USD
Henderson, KY
Trusted Seller
Mitsubishi MJ-2 Plastic Injection Molding Machine Operator Control Switch Panel
- used
- Manufacturer: Mitsubishi
Mitsubishi MJ-2 Plastic Injection Molding Machine Operator Control Switch Panel Note couple knobs missing from switches. INV# P-654
$200 USD
Henderson, KY
Trusted Seller
Mitsubishi 90-210 Ton Plastic Injection Molding Machine Operator Switch Panel
- used
- Manufacturer: Mitsubishi
Mitsubishi 180 Ton Plastic Molding Injection Machine Operator Switch Control Panel. 17" x 5.5" Nice high detail images on the mounting plate that would be a good upgrade to any older machine. NOTE: Image showing ...
$400 USD
Henderson, KY
Trusted Seller
950 Ton, 156 Oz., Mitsubishi Injection Molding Machine w/ Yushin Robot
- used
- Manufacturer: Mitsubishi
- Model: 950MMJW-160
Model: 950MMJW-160 | Us tonnage: 950 | Shot size (oz. of ps): 156 | Platen size (in.): 70.9 x 70.9 | Tiebar spacing (hxv) in.: 51.2 x 47.2 | Max mold height (in.): 43.3 | Min mold height (in.): 19.7 | Opening st...
Stafford, TX
Trusted Seller
Mitsubishi Mac-V Injection Molding Machine Control Center Module
- used
- Manufacturer: Mitsubishi
Used, in Good Working Condition. Removed From a Working Environment. Some of the part numbers include 19408-PR02A 3A133644 6900-PR10C 3A133611. These are of the circuit boards. Was working when removed. We parted...
$2,550 USD
Millersburg, IN
Trusted Seller
MITSUBISHI 1.8 Oz Injection Unit 65MJII-1.8 / IU Used
- used
- Manufacturer: Mitsubishi
1.8 Oz Shot Size .98" (25 mm) Screw Diameter 33,160 PSI Injection Pressure 300 RPM Screw Speed Removed from: 60 Ton Mitsubishi Injection Molding Machine Model: 65MJII-1.8 Serial: 3S06G016 Expedited shipping ser...
$1,995 USD
Warehouse
Trusted Seller
MITSUBISHI 4.8 Oz Injection Unit 90MJ-5 / IU Used
- used
- Manufacturer: Mitsubishi
4.8 Oz Shot Size 1.42" (36 mm) Screw Diameter 28,446 PSI Injection Pressure 5.67" Injection Stroke 350 RPM Screw Speed Removed from: 90 Ton Mitsubishi Injection Molding Machine Model: 90MJ-5 Serial: P0805088 Ex...
$1,495 USD
Warehouse
Trusted Seller
MITSUBISHI 9.3 Oz Injection Unit 120MJII-10 / IU Used
- used
- Manufacturer: Mitsubishi
9.3 Oz Shot Size 1.77" (45 mm) Screw Diameter 28,446 PSI Injection Pressure 7.09" Injection Stroke 230 RPM Screw Speed Removed from: 120 Ton Mitsubishi Injection Molding Machine Model: 120MJII-10 Serial: P1010C0...
$2,950 USD
Warehouse
Trusted Seller
MITSUBISHI 1.8 Oz Injection Unit 65MJII-1.8 / IU Used
- used
- Manufacturer: Mitsubishi
1.8 Oz Shot Size .98" (25 mm) Screw Diameter 33,160 PSI Injection Pressure 300 RPM Screw Speed Removed from: 60 Ton Mitsubishi Injection Molding Machine Model: 65MJII-1.8 Serial: 3S06G006 Expedited shipping ser...
$1,995 USD
Warehouse
Mitsubishi 1300MMV Injection Molding
- used
- Manufacturer: Mitsubishi
- Model: 1300MMV
Good condition Mitsubishi 1300MMV Injection Moldings manufactured in 2011. Located in China and other countries. Click request price for more information.
China