Used Mitsubishi EDM Machines

Trusted Seller
2000 Mitsubishi FA10SM
- used
- Manufacturer: Mitsubishi
- Model: FA10SM
High Machining Accuracy Auto Wire Threading X-axis: 13.8" | Y-axis: 9.8" | Z-axis: 8.6" | U/v axis: 1.25" x 1.25" | Taper capacity: +/- 15 Degree in 4" | Table size: 23.2" x 20.2" | Max workpiece size: 31.4" x 2...
United States
Trusted Seller
2022 Mitsubishi MV1200S Advance
- used
- Manufacturer: Mitsubishi
- Model: MV1200S ADVANCE
Used Mitsubishi MV1200S Advance (2022) CNC EDM (3 available). These pre-owned Mitsubishi CNC EDM wire machines are under power and available for virtual demonstration. Mitsubishi M800 Control Auto Wire Threadin...
United States
Mitsubishi - Motor HA200NC-S
- refurbished
- Manufacturer: Mitsubishi
- Model: 200-HA
SERVO MOTOR **100% Tested with State-of-the-art equipment** If you need a specific firmware or series relating to HA200NC-S, we probably have it. Please call or email us with your request. *Ask For Core Exchange ...
$800 USD
Progreso Lakes, TX
Mitsubishi - Module FX3U-20SSC-H
- new
- Manufacturer: Mitsubishi
- Model: FX20
**100% Tested with State-of-the-art equipment** If you need a specific firmware or series relating to FX3U-20SSC-H, we probably have it. Please call or email us with your request. *Ask For Core Exchange Credit*
$800 USD
Progreso Lakes, TX
Mitsubishi - Control Board CX20 MCA-02-DWC BY171E605G51
- refurbished
- Manufacturer: Mitsubishi
- Model: CX-20
**100% Tested with State-of-the-art equipment** If you need a specific firmware or series relating to CX20 MCA-02-DWC BY171E605G51, we probably have it. Please call or email us with your request. *Ask For Core Ex...
$1,250 USD
Progreso Lakes, TX
Mitsubishi - Servo Motor HA200NCB-S With OSA104 Encoder
- refurbished
- Manufacturer: Mitsubishi
- Model: 200-HA
With brake OSA104 Encoder **100% Tested with State-of-the-art equipment** If you need a specific firmware or series relating to HA200NCB-S With OSA104 Encoder, we probably have it. Please call or email us with yo...
$1,400 USD
Progreso Lakes, TX
Trusted Seller
MITSUBISHI FX3U-64MR/ES-A FX2N-8EX-ES/UL PROGRAMMABLE CONTROLLER T220754
- used
- Manufacturer: Mitsubishi
- Model: EX8
Warranty Information THIS IS A USED ITEM, IN GOOD CONDITION AND INCLUDES A 30 DAY WARRANTY. 100-240VAC 50/60Hz 45W; OUT 30VDC/240VAC 2A (COSØ=1); IN: 24VDC 5mA
$470 USD
El Paso, TX
Trusted Seller
Mitsubishi SX10 Wire EDM, New 1996
- used
- Manufacturer: Mitsubishi
- Model: SX10
1996 Mitsubishi SX10 Wire EDM: used, precise 3-axis movement, robust work tank. Ideal for CNC machining. Integrates seamlessly into existing workflows.
Los Angeles, CA
Trusted Seller
Mitsubishi MV-1200S MD+PRO3 Wire EDM - New 2014
- used
- Manufacturer: Mitsubishi
- Model: MV1200S
16" x 12"x 9" Dimensions: 106"x80"x80" | Weight: 6500 LBS | Equipped with: Chiller | X-axis travel: 15.7 in | Y-axis travel: 11.8 in | Z-axis travel: 8.7 in | Taper: +/- 15 deg | Max. workpiece dimensions: 31.9" ...
Los Angeles, CA
MITSUBISHI FX-20
- used
- Manufacturer: Mitsubishi
- Model: FX20
Mitsubishi FX-20 Wire EDM Control: Mitsubishi CNC Control | Dimensions: 71" x 95" x 87" | Weight: 6900 LBS | Equipped with: Chiller Unit with Filtration Dielectric Fluid Tank Filtration Unit Auto Threading RS-232...
Phoenix, AZ
Trusted Seller
2011 - Mitsubishi FA10S Advance CNC Wire EDM
- used
- Manufacturer: Mitsubishi
- Model: FA10S
Equipped with: 64 Bit Multi Tasking Control Anti-Electrolysis Generator
California, USA
1998 MITSUBISHI FX-10K
- used
- Manufacturer: Mitsubishi
- Model: FX10K
Mitsubishi FX-10K Wire EDM with Auto Threading Control: Mitsubishi CNC Control | Dimensions: 92″ x 84″ x 75″ | Weight: 4,070 LBS | Equipped with: Mitsubishi CNC Control Remote Pendant Submerged Cutting System Aut...
Phoenix, AZ
Trusted Seller
Mitsubishi EA8 CNC Sinker EDM, C axis & ATC, New 2000
- used
- Manufacturer: Mitsubishi
- Model: EA8
7 position tool changer, C axis, 3R chuck Dimensions: 96" x 72" x 84"H | Equipped with: 7 position electrode changer C axis | Power pack: 80.0 a | Table size-w: 13.7 in | Table size-l: 19.6 in | X-axis travel: 11...
Los Angeles, CA
1996 MITSUBISHI CX-20 EDM MW771C BN634A234G51 MW771 C
- used
- Manufacturer: Mitsubishi
- Model: CX-20
THIS PART CAME FROM A 1996 MITSUBISHI CX-20 CX20 CNC EDM MACHINE THAT WE DISMANTLED.
$65 USD
Los Angeles, CA
SANKEN DISPLAY MONITOR AIQA8DSP40 DL135L MITSUBISHI EDM 120 DAY WARRANTY
- used
- Manufacturer: Mitsubishi
THIS PART WAS REMOVED FROM A 1996 MITSUBISHI DWC-110SA CNC EDM THAT WE DISMANTLED.
$400 USD
Santa Clarita, CA
Mitsubishi EX30 EDM machine
- used
- Manufacturer: Mitsubishi
- Model: EX30
Good condition Mitsubishi EX30 EDM machines manufactured in 2005. Located in USA and other countries. Click request price for more information.
USA