Processing » Agitators, Blenders, Mixers » Japan

Search By Manufacturer

Search By Prefecture

Search By Type

Building Filters

418

Used Agitators, Blenders, Mixers in Japan

  • Ribbon Blender

    Ribbon Blender

      Main motor 11Kw, discharge motor 0.75Kw (reduction ratio 1/29) Capacity approx. 1500L

      Hiroshima, Japan
    • Ribbon Blender

      Ribbon Blender

        Total capacity 735 L Blade rotation 3–30 rpm (reduction ratio 1/240). With jacket (steam usage pressure 1.5 kg/cm2)

        Hiroshima, Japan
      • Ribbon Blender

        Ribbon Blender

          Tank dimensions: L1500, W900, H560. *The tank is a loose V-shape and the capacity is unknown. External dimensions: L2600, W900, H1250. Is the outlet for liquid use (there is a stand for the pump)?

          Hiroshima, Japan
        • SUS tank with agitator

          SUS tank with agitator

            250L φ710×H640(Body)×H750(Leg) Remarks: Ancillary product for 6931 Pressure Cake Mixer

            Hiroshima, Japan
          • Ribbon Blender 4000L

            Ribbon Blender 4000L

              Total capacity: 4000L Discharge: Bottom slide damper With SS jacket Main unit only, without board

              Hiroshima, Japan
            • [Kajiwara] Paddle Mixer

              [Kajiwara] Paddle Mixer

              • Manufacturer: Kanajiwara

              Capacity about 700L With jacket Purchasing area: 60Hz | Material: Wetted part SUS304 | Quantity saved: １

              Hiroshima, Japan
            • V Type Mixer

              V Type Mixer

                Where to use: Chemical factory Food factory Feed and fertilizer factory | Whole picture: 150L, approx. 80L SUS

                Kure, Japan
              • ［Ikeda Rika] V type mixer

                ［Ikeda Rika] V type mixer No model

                • Manufacturer: Ikeda

                Capacity: about 10L With agitator Power: 0.2kw/100V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: One

                Hiroshima, Japan
              • ［Mitsui Miike (now Nippon Coke)]

                ［Mitsui Miike (now Nippon Coke)] Cooler mixer No model

                • Manufacturer: Mitsui Seiki

                1000L Remarks. If serviced. It will be clean, please don't worry.

                Hiroshima, Japan
              • ［Special Kikka] Homo-Mixer Model No

                ［Special Kikka] Homo-Mixer Model No

                • Manufacturer: Daiichi Bussan Co.

                500 to 2000rpm Power: 200ｗ/100V | Material: Wetted part SUS | Quantity saved: One

                Hiroshima, Japan
              • Meiwa Industry OM-130

                Meiwa Industry OM-130

                • Manufacturer: Meiwa

                Total capacity 130L. Cage rotation speed 11/13rpm(50Hz/60Hz). 1.5Kw200V. Vessel rotation speed 22/26rpm (50Hz/60Hz). 0.4Kw 200V. The mixing layer rotates both vertically and horizontally to increase mixing power.

                Hiroshima, Japan
              • 2007 Buhler SDV 1100

                2007 Buhler SDV 1100

                • Manufacturer: Bühler

                Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...

                Hiroshima, Japan
              • 1990 Hosokawa Micron DBX-1000RMW

                1990 Hosokawa Micron DBX-1000RMW

                • Manufacturer: Hosokawa

                Mixing capacity 1000L Motor: 3.7Kw for rotation (explosion-proof) / 0.4Kw for revolution (explosion-proof) Rotation speed: 55RPM for rotation/ 1.6RPM for revolution Design withstand pressure: FV Jacket: 1.9Kg/cm²...

                Hiroshima, Japan
              • Aikosha Manufacturing AM-90

                Aikosha Manufacturing AM-90

                • Manufacturer: Aikosha Manufacturing Co.

                With ON/OFF switch & timer. Spare blades available.

                Hiroshima, Japan
              • Kawata SFC-50

                Kawata SFC-50

                • Manufacturer: Kawata

                High-precision mixing by three-dimensional motion (vibration + agitation) Remarks Blades: missing.

                Hiroshima, Japan
              12345

              Overview

              Agitators, blenders, and mixers are essential industrial machines used for mixing, blending, and agitating various materials. They are widely used across multiple industries, including food and beverage, pharmaceuticals, chemicals, and manufacturing. These machines come in different sizes and configurations, catering to specific mixing needs and ensuring uniformity and consistency in the final product.

              FAQ

              What should I consider when buying a used agitator, blender, or mixer?

              Consider the machine's capacity, condition, age, and compatibility with your specific materials. Check for any signs of wear, corrosion, or damage and request maintenance records if available.

              How do I ensure the safe shipping of an agitator, blender, or mixer?

              Use a reputable shipping company experienced in handling industrial machinery. Ensure the equipment is properly secured and protected to prevent any damage during transit.

              What is the regular maintenance schedule for these machines?

              Regular maintenance includes inspecting and cleaning all moving parts, checking for wear and tear, lubricating bearings, and ensuring all electrical components are functioning properly. Refer to the manufacturer’s manual for specific maintenance guidelines.