Used Heat Exchangers in New Jersey, USA

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 232712

• used

• Manufacturer: APV/Hebeler

Minimal design metal temp.=-20 degrees F at 200 psi.

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 216388

• used

Certification: Certified by WFT GmbH MDMT 319 degrees F at 450 psi Volume: 89.70/90.3 WD (Water Distribution): 10-300

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 214850

• new

• Manufacturer: Alfa Laval

CRN L-4646.57 Print weight is 6247 lbs The frame plates are SA-516-70 CS With (418) channel plates

Stainless Steel Austenitic Air Fin Heat Exchanger - IPP# 222357

• used

• Manufacturer: Balke Durr

fin fan overhead cooler design pressure 3.2 bar @ 135 degrees C working pressure 1 bar @ 60 degrees C fins are 54mm diameter (2) appox 46.5 m3/second type LPVT 4 ventilator fans mounted underneath 2500mm diameter

ALFA LAVAL H7-RC

• used

• Manufacturer: Alfa-Laval
• Model: H7-RC

used 220 Sq.Ft. ALFA LAVAL Plate Heat Exchanger/Pasteurizer. Type H7-RC. Unit has (44) 48" x 15.5" Plates is 3 Zones. Zone 1 has (10) Plates; Zones 2 and 3 have (17) plates each for approx 220 Sq.Ft total area...

Shell and Tube Heat Exchanger 545 m² (5,866 ft²) Carbon Steel - IPP# 246934

• used

• Manufacturer: Houston Heat Exchanger

After Cooler With expansion joint

APV SR6-GLM-T

• used

• Manufacturer: APV - Gaulin

Used approx. 275 Sq.Ft. APV Crepaco, Titanium, Plate Exchanger, Model # SR6-GLM-T. Rated for 100 psi @ 200 F. (37) 20" x 56" Titanium Plates with EPDM Gaskets. 5' 11.75" High x 20" Wide x 4' 2.5" Deep. Serial #76...

Hastelloy C22 Calorifier Shell and Tube Heat Exchanger - IPP# 247267

• used

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 246071

• used

• Manufacturer: Ward Tank Co

Note: the NB Papers report this unit to be vertical, however it is set to be in the horizontal position. (AS)

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 246073

• used

• Manufacturer: Atlas Industrial

Tema Type BEM size 48-240 Vacuum Condenser

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 241133

• used

• Manufacturer: Enerquip LLC

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 245568

• used

• Manufacturer: RAS Process Equipment

Graphite Kearney 981 Shell and Tube Heat Exchanger - IPP# 83655

• used

• Manufacturer: Kearney

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 241051

• used

• Manufacturer: Atlas Industrial

Copper Frick CO. Shell and Tube Heat Exchanger - IPP# 205012

• used

• Manufacturer: Frick

270/FV to 300/FV PSI @ -30/200 deg. F Tube, Coil, & inner chamber. Tube side -30 deg. F @ 200 deg. F Manufactured by Frick CO.Wanbouugh PA