Used Electrical Test Instruments in Dublin, Ireland

Schaffner NSG 223A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 223A module is designed to generate high-energy pulses typical of those caused by switching inductive and capacitive loads or lightning strikes. It delivers pulses up to 2 Joules, availa...

Schaffner NSG 200C

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG-200C is a modular disturbance simulator mainframe designed with a rugged 19-inch tabletop housing. It centralizes critical functions including power input, UUT connections, overload prot...

Teseq (Schaffner) NSG437

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG437 ESD simulator delivers precise air and contact discharge testing up to 30 kV, ensuring compliance with IEC/EN 61000-4-2, ISO 10605, and other standards. Featuring a touch panel ...

Schaffner NSG222A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG222A Pulse Interference Simulator delivers precision testing with 5ns/100ns pulse forms, featuring a built-in coupling network for symmetrical and asymmetrical pulse injection on mains co...

Haefely PIM120

• Manufacturer: Haefely

Details The Haefely PIM120 is a precision impulse current generator designed for component and material testing. It delivers controlled, high-current pulses that ensure durability verification and compliance with...

Schaffner NSG 224A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG-224A is a modular disturbance simulator mainframe engineered for the NSG-200 series, delivering core functionality such as power handling, line filtering, overload protection, and phase ...

emtest UCS200N

• Manufacturer: emtest

Details EMTEST UCS200N / EM Test UCS 200N The EM Test UCS 200N Ultra-Compact Simulator for Automotive Transients unifies the capabilites of an EFT/Burst simualtor, a Micropulse simulator and the required coupling...

Emco 3810/2 SH

• Manufacturer: Emco

Details The EMCO 3810/2 SH Single Phase LISN (Shuko Connector) operates over a frequency range of 9 kHz to 30 MHz, supporting a continuous current rating of 10 A. It features two lines (L+N) plus a ground-switche...

Rohde & Schwarz ESPI7

• Manufacturer: Rohde & Schwarz
• Model: ESPI7

Details The Rohde & Schwarz ESPi 7 EMC Spectrum Analyzer covers a frequency range from 9 kHz to 7 GHz, offering high sensitivity with a noise floor of -155 dBm (1 Hz) and resolution bandwidth from 10 Hz to 10 MHz...

Rohde & Schwarz ESIB40

• Manufacturer: Rohde & Schwarz
• Model: ESIB40

Details The Rohde & Schwarz ESIB-40 EMI Test Receiver operates from 20Hz to 40GHz, designed for precise interference measurements compliant with CISPR 16-1 and VDE 0876. It includes all required detectors, a 20dB...

Rohde & Schwarz ESIB26

• Manufacturer: Rohde & Schwarz
• Model: ESIB26

Details The Rohde & Schwarz ESIB26 offers high sensitivity and low inherent noise, enabling precise signal detection across a wide dynamic range. Featuring fast measurement speeds, integrated preselection and pre...

Schloder SESD230

Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Schaffner NSG2025-8

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-8 is a high-end 3-phase fast transient/burst generator capable of generating signals up to 8kV with a maximum burst frequency of 500kHz. It integrates a 30A coupling network and supp...