Used Tanks & Kettles in Germany

1000 liter tank, Aisi 304

remarks: metallic discolourations inside; 1 tank with baffles inside

2000 liter tank, Aisi 304

notice: some residues of previous content, bump at the insulation jacket remarks: slight differences in design (connectors); diameter manhole 490 mm; former connectors were welded closed by the former operator; t...

1400 liter tank, Aisi 304

notice: some residues of previous content, scratches inside remarks: Manhole appr. 300 x 440 mm; Level indicator incomplete; Butterfly valve screwed to the outlet (for 1 tank DN 50, for the other tank DN 40); 1 l...

2645 liter tank, Aisi 304

• Manufacturer: Rieger

remarks: 1 manhole approx. 340 x 440 in the front bottom; Test pressure according to the nameplate 2 bar

630 liter tank, AISI 316

notice: some residues of previous content, manhole cover plated

1990 Vacuum tank compressed air tank 455 L from Zeidler & Uhl – vertical 35886

• Manufacturer: Zeidler & Uhl

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank

1000 liter tank, Aisi 304

remarks: Manhole diameter approx. 440 mm (manhole cover is loose); tank with small dents

3500 liter tank, Aisi 304

remarks: Manhole cover flange made of Fe; 1 former connection welded shut in the lower bottom of each tank (see pictures)

2440 liter tank, Aisi 304

max. allowable working temperature: 60 °C remarks: 2 loose, height-adjustable bearing shells, Aisi 304; 1 manhole approx. 345 x 440 mm in the front bottom; partially 1 lifting eyelet on top of the tank; Inner len...

6350 liter heat-/ coolable tank, Aisi 304

• Manufacturer: Becker Tanks

remarks: Thermoplate for heating/cooling on one of the two side walls (not on the other side wall); 1 manhole approx. 340 x 440 mm in the front bottom; small dents in the upper bottom; various fittings inside the...

1600 liter tank, Aisi 304

notice: some residues of previous content, Metallic discolouration inside remarks: tank with a protective coating outside; dents and smaller cut-offs in the insulation jacket; handhole DN 250; Outlet with flanged...

8640 liter tank, Aisi 304

• Manufacturer: Behälter KG

notice: some residues of previous content, pipe end cut flush remarks: agitator shaft cut off; weldet screws on the tank surface outside (see pictures); 1 pipeline inside; manhole cylinder appr. 340 x 440 mm

3000 liter tank, Aisi 304

• Manufacturer: ALFA-LAVAL

remarks: Manhole approx. 400 x 510 mm; 2 pipes inside the tank

11000 liter tank, Aisi 316

remarks: 1 manhole diameter 500 mm in the lower cylinder area; 1 hand hole NW 200 in the upper cylinder area (attention: manhole cover and hand hole cover made of Aisi 304); Tank with adhesions inside; slight rus...

1700 liter tank, Aisi 304

remarks: Adhesions and metallic discoloration inside the tank; lower bottom with smaller dents