Used Miscellaneous in Michigan, USA

New Ajax 2500 Steel Ram Casting Immediately available can be machined to fit!

• Manufacturer: Midwest Automation

Cast in January 2025 from AISI 4140 for Midwest Press. This casting has ample stock to finish at OEM dimensions, but can be finish machined by MPA to suit the customers press. The ram was cast with a thicker exte...

New Ajax 2500 Eccentric Shaft Immediately available

• Manufacturer: Midwest Automation

Manufactured in December 2024. Forged 4340 with Material Certification Report (forged & machined by Ellwood Crankshaft for MPA). Finish machined to OEM dimensions with minor changes to mains, cam & brake diameter...

New Ajax 2500 Pitman & Wrist Pin Immediately available

• Manufacturer: Midwest Automation

Wrist pin is new and currently to size for refurbed pitman. Pitman has a pad welded pin bore, it will need to be finish machined and knuckle skim cut. Eccentric bronze will be installed and machined to size over ...

AIDA MODEL TCS-40-35/70 SERVO TRANSFER FEEDER

• Manufacturer: Aida

The Aida Model TCS-40-35/70 Servo Transfer Feeder, serial number 12300-6484, is a used piece of industrial equipment designed for precise material handling. This transfer feeder offers a variable feed stroke rang...

2000 ROTO FINISH 15 CU FT MULTI PASS VIBRATORY BOWL FINISHING MACHINE

• Manufacturer: Hammond/Roto-Finish

The 2000 Roto Finish Model MP-120-8-2 is a dependable used vibratory bowl finishing machine designed for efficient surface finishing operations. This model, with a chamber size of 15 cubic feet, is ideal for debu...

Surface Combustion Charge Car-36 X 48 #M509

Item # M509 Surface Combustion Charge Car-36 X 48 Built by Surface Combustion this unit is suitable for a 36″ X 48″ X 36″ batch IQ furnace. 480 Volt. Complete and in operation until recently. Jordan Montgomery ...

Dry Coolers Five Fan Closed Loop Cooling Fans (2 Available) #M506

Item # M506 Dry Coolers Five Fan Closed Loop Cooling Fans (2 Available) Dry Cooler 5 Fan units. 3” copper in & Out Both units are in working condition Both fan units, test run good, motor starters are in the end ...

Surface Combustion Double Ended Charge Car #M502

Item # M502 Surface Combustion Double Ended Charge Car Manufactured by Surface Combustions of Maumee, Ohio this is a Double Ended, Powered Charge Car – System I complete with Roller Rail Top. Model DEDP System #1...

Holcroft 36×72 Double Ended Charge Car #M499

Item # M499 Holcroft 36×72 Double Ended Charge Car Manufactured by Holcroft this is a double ended charge car suitable for a 36″ X 72″ batch IQ furnace. Complete and in good condition. Jordan Montgomery 647-200...

Surface Combustion Charge Car 30″ X 48″ X 30″. Model; Extended Reach, DEDP, Serial Number BC-43099-01 #M511

Item # M511 Surface Combustion Charge Car 30″ X 48″ X 30″. Model; Extended Reach, DEDP, Serial Number BC-43099-01 Suitable for a “Super 30″ Batch IQ furnace with working dimensions of 30″ wide X 48” long 480 V 3 ...

Williams IQ Charge Car 36 X 48-Excellent Condition! #M503

Item # M503 Williams IQ Charge Car 36 X 48-Excellent Condition! Built by Williams Industrial this charge car is designed for a 36″ X 48″ batch IQ furnace; Serial Number 02869 460VAC / 3 Phase / 60 Hz Built in 202...

NILSON "S" SERIES FOURSLIDE

• Manufacturer: Nilson
• Model: S-4

The Nilson "S" Series Fourslide, model S-4, is a versatile used piece of machinery designed for forming applications. It is capable of handling a basic wire diameter of 1/4" and a maximum strip metal width of 1 7...

Sealed Air Instapak Foam In Bag

• Manufacturer: Sealed Air

Mounted on table with casters. Comes with extra nozzles and solvent. Has 10% A and 25%B. Sealed Air Instapak Model Foam in Bag M3924

Econoline 3

• Manufacturer: Econoline

Inside Dimensions: 36″L x 24″W x 18″H. Shipping Dimensions: 32″Lx 46″W x 70″H, 325 lbs. Econoline Model 3 Sandblast Cabinet M3945

Guard Air NO51M

• Manufacturer: Guard Air

20 CFM. Inlet: .375. 25′ Hose included. Guard Air Model NO51M 10 Gallon Pneumatic Vacuum M3960