Used Bending & Forming in Washington, USA

Bravo Hydraulic Elbow Forming Machine

• new

• Manufacturer: Bravo

NBRAVHEM Gore-Locking Elbow Machine Edge-forming made easy with 3 sets of forming rolls, forming up to 48″ diameter x 18 Ga Specifications: Diameter Range : 5” to 50” Max segment angle: 30 degrees (90 degree elbo...

CARELL 307HV - Made to Order

• new

• Manufacturer: Carell

Made to Order DMT offers sales in United States and Canada on Carell Pinch Angle Rolls CARELL 307HV Double Pinch Angle Roll Documents The CARELL 307HV is a 3 driven rolls, double initial pinch universal bending m...

CARELL MRM-H SERIES - Made to Order

• new

• Manufacturer: Carell

Made to Order DMT offers sales in United States and Canada on Carell Pinch Plate Rolls Carell MRM-H SERIES 3 Roll Hydraulic Initial Pinch Plate Rolls Carell MRM-H Series are Fully Hydraulic 3 Roll Initial Pinch P...

Tin Knocker T-D-P (TDC or TDF) Roll Former with clip rolls

• new

• Manufacturer: Tin Knocker

This 14 station roll former comes standard with TDC or TDF Rolls, Slitter and Clip Rolls outboard. This T-D-P roll former will roll sheet metal into leak proof, sealable TDC or TDF flanges at speeds of up to 50 ...

U14649 Flagler Hem and Kick or full/modified Reeve’s lock machine

• used

• Manufacturer: Flagler

This machine can be sold with current hem and kick rolls for $6,500 or with male and female Reeve’s lock, or modified Reeve’s lock. Reeve’s lock is used to make round snap lock pipe. Price with Reeves lock rolls ...

U14645C Lockformer 18 gauge Pitts w/ 3in1

• used

• Manufacturer: Lockformer

ITEM: 14645C MODEL: L18 CAPACITY: 18 gauge LOCATION: Kent, WA POWER: 230V 3 1pH With 3 in 1 rolls on auxilary side.

U14669C Flagler TDF with standing S

• used

• Manufacturer: Flagler

Item: U14669C Model: 35-500 Capacity: TDF 18 Gauge, Standing S 22 gauge Location: Portland, OR Power: 460v 3 ph

Lockformer 20 GA Button Punch Snap Lock Machine

• new

• Manufacturer: Lockformer
• Model: 20GA

Lockformer 20 gauge Button Punch Snap Lock Machine The Lockformer Button Punch Snap Lock Seam Roll Former forms a two piece seam that greatly simplifies ductwork assembly. The male seam is a button, the female se...

Striker HD/HDX Square to Round Braking Machine

• used

The Ultimate Square to Round Machine! The Striker brake produces quality-leading off-set and center-line square-to-rounds in half the time. Convenient shop portability. Requires shop air only ( 90-120 psi). Stri...

Bravo 6018 Rect Duct Line

• new

• Manufacturer: BENOIT SHEET METAL EQUIPMENT

NBRAV6018 Starting at $71,700 – READY TO SHIP! Features : Uncoiling, Leveling, Beading, Notching, Shearing, Breaking, Touchscreen Program, Metric & Imperial Capacity : 26-18 Ga, 48″-60″ Coil Width Notches for : S...

Roper Whitney No. 622 Series

• new

• Manufacturer: Roper Whitney
• Model: No. 622

Roper Whitney Model 622 WR with A, C, D, E & F Rolls The No. 622 Series is equipped with the addition of a 7″ deep throat for additional forming capabilities, such as furnace collar edging. The Model No. 622 incl...

U14774 Lockfomer BPSL20 button punch

• used

Lockformer Snaplock

• new

• Manufacturer: Lockformer
• Model: SNAPLOCK

Lockformer Button Punch Snap Lock Machine Roll single-direction curves down to a minimum radius of 3-1/2” inside or a 5” outside radius, almost automatically. These punched right-angle flanged curves fit perfectl...

RAMS RAMS-2014

• new

• Manufacturer: Rams

RAMS-2014 Auxiliary Machine The RAMS 2014 Auxiliary Machine is like no other machine available on the market today. This machine was designed specifically for ease of use, flexibility and the convenience of the e...

RAMS NRAM2013

• new

• Manufacturer: Rams

3 H.P. electric motor, 115/208-230V, 1,725 RPM Torrington Needle Bearings and hardened steel components Cabinet built with heavy gauge steel Hammertone Green Finish. Rams 2013 S and Drive Rollformer The unit come...