Used Sanders

Laguna, Pro 37″ Widebelt Sander

• Manufacturer: Laguna

This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensio...

Wood Sanders

• Manufacturer: Costa

* Sanders - 11 Sanders in stock *All can be test run! 2- 53" 2 heads Costa 2 platinum w39000 2 - 3 heads Costa 19900 sold 3 - 4 heads Costa 79000 time savior 49000 and 19900 I bottom calibrating Timesaver 14900...

Laguna, Pro 43″ Widebelt Sander

• Manufacturer: Laguna

This machine is equipped with 1 ( 8”) roller and a second (4”) roller followed by a wide platen for a fine finish. This allows you to use a rougher grit on the first roller (8”) that will absorb most of the impac...

Powermatic, OES9138 Edge Sander, 3HP 3PH 230V

• Manufacturer: Powermatic
• Model: OES9138

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...

Powermatic, OES9138 Edge Sander, 3HP 1PH 230V

• Manufacturer: Powermatic
• Model: OES9138

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...

AEM 36" 1 Head HD Sander

• Manufacturer: AEM

Sanding Master GKSB-900 / 36" Widebelt Sander 220V (6480)

• Manufacturer: Sanding Master

(Better pictures will follow as soon as it stops raining here LOL) Sanding Master GKSB-900 / 36" Widebelt Sander 220V, 3ph Very nice condition and has been completely gone through All items are sold “AS IS” ...

BLACK AND DECKER BELT SANDER/ROCKWELL SANDER

• Manufacturer: Black+Decker

BLACK AND DECKER BELT SANDER/ROCKWELL SANDER

6″ x 48″ Rockwell Belt and 10″ Disc Sander

• Manufacturer: Rockwell

Return To: Sanders Volt:230, Phase: 3 Good Condition

Northtech NT-RRS80B2 Round Rod Sander Double Belt

• Manufacturer: Northtech

The NT-RRS80B2 is a two head heavy duty sander specifically designed for round rods. It is a heavy-duty industrial grade sander that rolls the part against the sanding belts as it is fed though the machine. Varia...

Northtech NT-MBS12-2T1R1OL Moulding Brush Sander

• Manufacturer: Northtech

Machine hp: 5.5 HP. | Direct drive (motor): Sanding Heads | Voltage, frequency: 230/460 Volt 60 Hz | Phase: 3 Phase | Amp requirement: 16.5/8.25 Amps | Configuration: 2 Top 1 Left 1 Right Opposing | 1st head: 1....

Heesemann MFA 8 Sander

• Manufacturer: Heesemann
• Model: MFA 8

Good condition Heesemann MFA 8 Sanders available between 2011 and 2019 years. Located in Germany and other countries. Click request price for more information.