Used logic probes

QTY. 1. LOPIC LOGIC PROBE

QTY. 1. LOPIC LOGIC PROBE,.

RSR 811 LOGIC PROBE

INFORMATION: RSR 811 LOGIC PROBE System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS: We accept Paypal, Company Check, Wir...

GW Instek GLP-1A Logic Probe and Pulser, 4VDC to 18VDC Operating Voltage, 50MHz Maximum Input Frequency

• Manufacturer: GW Instek

The GLP-1A logic pulser can be used to perform in-circuit testing of TTL, CMOS, and many other logic devices at a maximum of 50MHz. The GLP-1A is enhanced with a logic probe function with a minimum detectable pul...

Tektronix NEX-PRB1XL64^

• Manufacturer: Tektronix

The NEX-PRB1XL64 probes are high speed, logic analyzer probes designed to fit in mechanically tight applications. Connection to the target is made at a right angle, reducing the probe vertical keep-out relative t...

Agilent/Keysight N4246A

• Manufacturer: Agilent - Keysight

Midbus Probe Bi-Directional X8 for HT3 5.2 GB/s For use with the 16900 series logic analyzers and the 16950B or 16951B modules.

Tektronix P6864

• Manufacturer: Tektronix
• Model: P6864

The P6864 is a high-density compression probe designed for high data rate applications (＞450 MHz) where a smaller footprint is desired, such as 4x and 2x clocking. This probe utilizes the same compression probe a...

Agilent/Keysight E5404A

• Manufacturer: Agilent - Keysight
• Model: E5404A

The Agilent E5404A Pro Series soft touch connectorless probe provides a convenient, reliable means of probing your target system without the need for a connector. Pro Series soft touch connectorless probing suppo...

Agilent/Keysight E3497B

• Manufacturer: Agilent - Keysight

The Agilent E5900B series of emulation probes provide an electrical interface to a supported microprocessor's on-chip debug port (BDM or JTAG), enabling access for either debuggers or Agilent 16700 Series logic a...

Agilent/Keysight E5900B/E3497B

• Manufacturer: Agilent - Keysight

Agilent Technologies E5900B emulation probes provide access to the on-chip debug port of popular microprocessors and microcontrollers. The emulation probes may be used stand-alone or fully integrated with Agilent...

Tektronix NEX-PRB2X-T^

• Manufacturer: Tektronix

Passive Module Reduction (MR) Technology Nexus Technology's Module reduction Technology is available with this interposer. Products implementing MR Technology allow for full acquisition, including read and write ...

Agilent/Keysight 10269A

• Manufacturer: Agilent - Keysight
• Model: 10269A

The Agilent HP 10269A Probe Interface is a preprocessor for use with the 1630 A/D Logic Analyzers. Provides channel width of 43 data channels and 3 clock channels: 25 MHz max qualified clock rate. Input impedance...

Agilent/Keysight 10272A

• Manufacturer: Agilent - Keysight

The HP Model 10272A General PurposeState/Timing Probe. Eight channels for collecting state activity or timing activity. No input clock channel. One state/timing probe is supplied with either 1630A or 1630G and tw...

Tektronix NEX-PRB1XL^

• Manufacturer: Tektronix

The process of attaching the interposer to your target has been greatly simplified using Nexus Technology's patented, high-bandwidth, component interposer sockets. These patented sockets completely remove the nee...