Used roller tables

Roller tables 1225mm x 560mm, Ø 85mm

Not motorized, axis distance 90mm Roller Ø 85mm Weight: 250 kg | Outside dimensions: 1225mm x 680mm, h. 860mm | Useful dimensions: 560mm x 830mm

Clausing CAST IRON w/PRECISION GROUND TOP

• Manufacturer: Clausing

CAST IRON WORK TABLE FOR CLAUSING DRILL PRESS WORK SURFACE - 20" x 30" COOLANT TROUGH IS AN ADDITIONAL 2.5" ALL AROUND TOTAL SIZE IS 25" x 35" OVERALL COMES WITH HARDWARE FOR MOUNTING IT TO A BOX TABLE (IT WAS US...

Small grinding table with exhauster

Useful dimensions: width 800 mm, depth: 800 mm Motor 0,25 kW, 220/380 V Grinding table with exhauster, outlet inside 200 mm x 250 mm With grating

Fastloop with vibrating table

Fastloop consisting of: Vibration table: Dimensions: Length: 1000mm; Width: 1000mm; Height: 650mm roller width: 675mm; center distance: 225mm; Ø roller: 90mm With relay control 4 air bars End switch under the tab...

Vibration table 2000 x 1250 mm

External dimensions: Length: 2000mm; Width: 1250mm; Height: 500mm With 8 castors: Ø850mm; Length: 1190mm

Moulding machine OSBORN 716 R4F, table 850mm x 530mm

Ram-jolt machine Weight: 1900 kg | Dimensions: width 1000mm, depth 1300mm, height 1800mm | Pression stroke: 165mm | Pression capacity: 11 500 kg | Pattern draw: 254mm | Jolt capacity: 625kg | Maximum depth of mou...

Moulding machine OSBORN 716 R4F, table 850mm x 530mm

Weight: 1900 kg | Dimensions: width 1000mm, depth 1300mm, height 1800mm | Pression stroke: 165mm | Pression capacity: 11 500 kg | Pattern draw: 254mm | Jolt capacity: 625kg | Maximum depth of moulding boxes: 686...

Small wood saw, in gradual angle 2 x 45°

• Manufacturer: Omga

With vice, table, disc Ø 240 mm Weight: ± 40 kg | Outside dimensions: 700 mm x 550 mm, h. 450mm | Inside dimensions: 580 mm x 160 mm | Motor omga, serial number: 37687, 1,3 hp, 220/380 V

Hangji Double Roller Driving Pinch Roll

• Manufacturer: Hangji

Equipment Application The pinch roll and wire discharger are arranged after water cooling plant of finishing roll.The pinch roll is the device for steel line rolling production which mainly used for gripping roll...

Semi-automatic moulding line HWS/HSP 1

Serial number: 1190, com. number: 10469 Year of construction: 1995, weight: ± 25000 kg Height 2970 mm Plant equipt by several hydraulic units With rotating table, roller stripping Stroke 200 mm, press stroke 200...

Furan sand mixer ±4-5t/h OMEGA

• Manufacturer: Omega

Mixing arm movable With 3 daily hoppers, 1m³ each With 1 dosing screw With 2 roller conveyors; length: 2950mm; length: 4100mm With Mitsubishi D700 control unit ±12KW, 380V; 32A With 2 pumps Without steel construc...

1997 Moulding line BELLOI & ROMAGNOLI, 650 mm x 650 mm x 200/200 mm

Type: BRAP/4, construction year: 1997 Moulding line BELLOI & ROMAGNOLI hydraulic squeeze with rotating table With: - roller conveyors for return line (11 meters long) - roll-over (manual drive) - hydraulic statio...

Double arm screw mixer IMF 30 t/h (Alphaset), with fast loop

Consisting of: -Mixer : Brand: IMF outside 5400 mm x 1600 mm, h. 4200 mm, expanded arm Length second arm, screw length between axle 2000 mm - 1 vibrating table set up on 6 pneumatic cushions, outside 2100 mm x 14...

1982 Moulding machine HEINRICH WAGNER EFM4, 4 pillars

• Manufacturer: Heinrich Wagner

Load: 1500 kg shaker, demolding stroke: 450 mm Pressing stroke: 250 mm, moulds up to 1200 mm x 1000 mm x 400 mm Stripping roller