- Trusted Seller

2022 Roth MFM2S
- Manufacturer: Roth
Equipped With: Beckhoff Industrial PC Control System Quick Change Blade Design Automatic Pleating Height Adjustment Linear Top and Bottom Blade Automatic Platform Setting Change On the Go Top Gap – Bottom Gap Inp...
- Trusted Seller

2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 669251 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller

2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 442663 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller

Wabash PC50-2418-4TM
- Manufacturer: Wabash
Machine type: Process Equipment | Machine location: California | Stock #: 631604 | -compression tonnage: 50 Tons | -compression cyl.: 7×7 | -platens: 24″ x 18″ Electric Heated, 9600 watts | -motor hp: 3 HP | -el...

Tiger Depack HS-90 Depackager
- Manufacturer: Tiger Depack
The largest Tiger Depackager, the HS-90, is the secret ingredient that helps you turn food waste into profit by separating organic waste from inorganic packaging. The Tiger HS-90 can feed, separate, process, and ...
Avon, OH- Trusted Seller

Graco L-S20 5 Gallon
- Manufacturer: Graco
Machine type: Process Equipment | Machine location: California | Stock #: 482427 | Material container volume: 5.3 gal | Maximum air inlet pressure: 125 psi | – maximum flow rate: 1.6 GPM | – min flow: 1.6 GPM | ...
- Trusted Seller

Allen Systems 18"W X 85"L Type FC Vibrating Pan Conveyor Feeder
- Manufacturer: Allen
Serial No: 20901 Unitary formed stainless steel conveyor pan with 5" sidewalls. 10"Ø drop-out discharge, 20.5" above base elevation. Beam type base frame measuring 27"W X 51"L Controller not available.
Tiger Depack HS-55 Depackager
- Manufacturer: Tiger Depack
The Tiger HS-55 Depackager separates organic food waste from inorganic packaging and produces up to 99.6% contamination-free organics! The Tiger HS-55 can process bulk commercial food waste or pre-or post-consume...
Avon, OH- Trusted Seller

Dings Overbelt Magnet
30" wide by 5' long Dings Overbelt Magnet 30" Wide 5' Long Good rectifier Comes with the stand Buyer responsible to disassemble and transport Selling as-is where-is.
- Trusted Seller

West Salem Machinery 4260S
- Manufacturer: West Salem Machinery
-300 HP -Direct Drive Motor with 60″ Wide VFD Panel -3HP HYD Power Pack -Top Loading Infeed Chute -42″ Rotor Diameter Drawing Available
- Trusted Seller
2017 Otec DF80 Df-series Pharma Drag Finishing Unit 230v-ac
- Manufacturer: OTEC
“Used” Model number: DF80 | Mpn: DF80 | Shipping weight: 1403 lbs | Shipping dimensions: 82 x 56 x 46 in | Reference sku: 1736885
- Trusted Seller
Honeywell C7076A1007 Ultraviolet Flame Detector
- Manufacturer: Honeywell
“SHELF WEAR” Model number: C7076A1007 | Mpn: C7076A1007 | Shipping weight: 7 lbs | Shipping dimensions: 14 x 8 x 7 in | Additional notes: SHELF WEAR | Reference sku: 1701933
- Trusted Seller
Komax ST-40411B Stainless Static Mixer 4in X 10in X 10in
- Manufacturer: KOMAX
“New without Factory Packaging” Model number: ST-40411B | Mpn: ST-40411B | Shipping weight: 295 lbs | Shipping dimensions: 33 x 26 x 19 in | Reference sku: 1067743
- Trusted Seller
Yoshikawa CF-200TSR-DV Circle Feeder 200v-ac
- Manufacturer: Yoshikawa
“DIFFERENT CONFIGURATION” Model number: CF-200TSR-DV | Mpn: CF-200TSR-DV | Shipping weight: 144 lbs | Shipping dimensions: 41 x 22 x 19 in | Additional notes: DIFFERENT CONFIGURATION | Reference sku: 910577
- Trusted Seller
2018 Henry Simon HS GPak 430
- Manufacturer: Simon
Equipped With -Sifting chambers with multiple sieve decks -Vibratory drive system -Adjustable sifting screens -Structural steel frame -All Available Manuals

Engel ES 700 Injection Molding
- Manufacturer: Engel
- Model: ES 700
Good condition Engel ES 700 Injection Moldings manufactured in 1992. Located in USA and other countries. Click request price for more information.
USA

