Used Processing in Flevoland, Netherlands

SRHF 800 (DV)

10,0 m3 Period capacity at 10 DH 65-96 m3 Salt use in renegration 25-63 kg Capacity of saltcellar 370 kg Resin content 250 L

TWIN 500

6,0 m3 Period capacity at 10 DH 39-57 m3 Salt use in renegration 15-38 kg Capacity of saltcellar 307 kg Resin content 150 L

TWIN 400

4,8 m3 Period capacity at 10 DH 31-46 m3 Salt use in renegration 12-30 kg Capacity of saltcellar 307 kg Resin content 120 L

TWIN 800

10,0 m3 Period capacity at 10 DH 65-96 m3 Salt use in renegration 25-63 kg Capacity of saltcellar 370 kg Resin content 250 L

TWIN 650

8,0 m3 Period capacity at 10 DH 52-77 m3 Salt use in renegration 20-50 kg Capacity of saltcellar 307 kg Resin content 200 L

TWIN 275

3,4 m3 Period capacity at 10 DH 22-33 m3 Salt use in renegration 9-21 kg Capacity of saltcellar 215 kg Resin content 86 L

Pressure Boosters

• Manufacturer: LETS

In order to ensure your tap water pipes have sufficient pressure, LETS offers various pressure booster installations . Equipped with excellent pumps, specially attuned to your situation. Thanks to the pressure bo...

Nice Hugo BECK Flexo 500S.

• Manufacturer: Beck

Machine had his visit at our workshop, and is well serviced. Some roller bearings had to be changed and the covers are reinforced at the critical places. Machine is capable to handle higher products then the stan...

PESTER TLC “toploader”

• Manufacturer: Pester

A Top Loader from manufacturer PESTER. Equipped with a industrial robot from KUKA. Machine stacks the products to a certain formation.Brings the formation to a transfer point where the robotic arm can pick it. ...

BECK & Co HV650 shrink tunnel.

• Manufacturer: Beck

Shrink tunnel manufactured by BECK&Co Entrance dimension are up to 600 x 30 cm.The upper and lower heating zone is adjustable with two thermostats ! ( so more possibilties to regulate the heated air and hopefully...

Hugo BECK HSL 618-25

• Manufacturer: Beck

Hugo BECK HSL 618-25 shrink tunnel. Shrinktunnel with a long heating zone up to 180 cm. Dimensions entrance max. 600 x 25 cm. Well maintained machine.The two blower motors had new bearings . EXTRA: the machine is...

MEURER CMS-100K shrink tunnel.

• Manufacturer: Meurer

MEURER CMS100K shrink tunnel. Machine is in good working condition. Dimensions of the entrance 1000 mm. width and 250 mm. Height. EXTRA: cooler mounted on the rear of the machine.

Hugo BECK WS 80-200

• Manufacturer: Beck

Hugo BECK WS80-200 L-sealer A SPECIAL ONE WITH A : Huge size range of 80 cm. in depth and up to 2 meters lenght ! Solid L-sealer build by a well-known manufacturer. The machine has a automatic outfeed conveyor a...

KALLFASS 5050 L-sealer

• Manufacturer: Kallfass

KALLFASS 5050 L-sealer , semi automatic Maximum range of 50 bij 50 cm. Solid L-sealer from a well known manufacturer The machine is equipped with a outfeed conveyor and a motor driven sealing frame. We can also ...

Good working BVM compacta 4010.

• Manufacturer: Compacta

BVM compacta 4010 , the machine was very dirty but functions OK.We cleaned it up , replaced the sealing bar for a new one. In- and outfeed convoyor units are completely overhauled and the belts where renuwed. And...