Used Processing in Wallonia, Belgium

Cut-off machine with 2 parallel disks, Ø 300 mm, HANS BOOST

Type: STA 300/300, serial number: 354 Year of construction: 1974, weight: ± 700 kg Hydraulic tubes Motor H SAFTIG, type AOM132S-2, 7,5 kW, 380 V, 2910 rpm With table length 300 mm, width 200 mm, 2 discs Ø 300 mm ...

Treatment ladle, capacity 6,5 - 7 t, COLLIN

With gearbox This treatment ladle was used for desulfurization

Sand aerator

With cone 2089 mm In good working condition Outside dimensions: Length 4200 mm, height 1100 mm | Motor: 10 kW, 1450 rpm, 380/660 V | Weight: 1600 kg

Noback mixer ISS / Omega, ± 3 t/h

• Manufacturer: Omega

Without pump, with equipment cabinet, pivoting and adjustable sand slider

Overband magnet 1,7 kW

Brand: SIME-LENOIR, type: OVE XV, serial number: 90695

Shake-out grid 1800 mm x 1800 mm

With vibrating axle, drive over 3 belts, on 12 springs, with increase on 3 sides

Sandfeeder KLEIN, 200 l

Year of construction:1 972, weight: ±250 kg 3 sand inputs, Ø 150 mm 1 sand output , Ø 70 mm With one level sensor With pressure regulator

Screw conveyor 6200 mm, Ø 250 mm

Ø 250 mm Gear motor SEW, type: R 62DT 100 L4; serial number: 3052533801.009.97; 3,3 kW; 380 V; 50 Hz; 1400 rpm

Jolt-squeeze moulding machine ZIMMERMANN GO/2B

• Manufacturer: Zimmermann

This machine shakes under pressure Number: 134150 | Press pressure: 3000 kg | Payload: max. 120 kg | Weidth max. moulding boxes: 450 mm | Table size: 570 mm x 430 mm | Press stroke: 90 mm | Lifting stroke: max. 1...

Steep belt conveyor, band width 500mm

Band width 500 mm, Axdistance 10000 mm Drummotor NERTON, type LS90L2, 1,5 KW, 144 rpm Closed steelconstruction, distance between carrier roller 800mm

Small bunker with 2 compartments 2 x 2,7 m³

1st screw CEM type MEUB90S4, 1,1 Kw, 220/380 V, 1410 rpm 2nd motor for screw CEM type MEUB90L8, 0,55 Kw, 220/380 V Driven by belt with one screw for each compartment Ø input 30mm (2x) Ø output 1x 200mm

Tansport chut LOCKER 4000 x 800 /440mm

Type: LDDC, serial number: DDC0493 Year of construction: 1999, weight : 1000 kg 2 Vibrating motors INVICTA, Type BK40-2716, 1,3 Kw, 960 rpm, 415 V Height of the input 200mm, the entrance is from behind Height of...

Bunker with discharging conveyor ± 4,4 m³

Gear motor + brake SEW, type KA87TDVI32S4BMO/HF, 5,5 kW, 230/400 V, 1430 rpm, exit: 46 rpm 2 drums Ø 320mm Bunker equipped with PVC in the inside Rollings with rubber Bunker with frame and discharging conveyor Wi...

1995 Pneumatic dust conveyor BOGGI+LEGNANI 50 l

• Manufacturer: Legnani

Serial number: 74057, construction year: 1995, weight: ± 100 kg Ø 470mm Operating pressure 8 bar With one pneumatic clap Input sand Ø 150mm Temperature 200°C Capacity 50 l Is adapted to silo S3104 of 19m³ Appropr...

Discharging belt EA 4500 mm x 990 mm

Gear motor BAUER, D2A47H/309K, serial number F11478; 4 kW, 5,5 hp; 220/380 V, 1420/31,5 rpm Driven by chain, Ø rolls 130 mm With cable for stopping the sides