Used threading and tapping machine

1/2" Waterbury Farrel #30 Incline Thread Roller
- Manufacturer: Waterbury Farrel
One Used 1/2″ Waterbury Farrel Model #30 Incline Thread Roller Specifications: 1/2″ Maximum Thread Diameter 4″ Thread Length 60 SPM Coolant Pump Automatic Lube Electrical Equipment and Controls: 15 HP Motor and C...
Posen, IL
1/2″ Waterbury Farrel #30 Incline Thread Roller
- Manufacturer: Waterbury Farrel
1/2″ Maximum Thread Diameter 4″ Thread Length 60 SPM Coolant Pump Automatic Lube 15 HP Motor
Posen, IL
1/4″ Sacma No. 0 Special Thread Roller
- Manufacturer: Sacma
1/4″ Maximum Thread Diameter 1 1/2″ Maximum Thread Length 3″ Maximum Blank Length 400 Pieces per Minute
Posen, IL
Trusted Seller
Ridgid 535 Power Pipe Bolt Threader Universal Die 120 Volt 811A Universal Die
- Manufacturer: Ridgid
- Model: 535
Used, in Good Working Condition, Tested. This unit is missing some parts. Needs the sump strainer and strainer pan. The handle is missing one lever. Has a newer 811A die head. 1/8-2" pipe. Setup for 120V. If this...
$1,402 USD
Millersburg, IN
3/16″ 0-500 Hartford Thread Roller
- Manufacturer: Hartford
SCREW DIAMETER CAPACITY #2 (.086″) THRU #10 (.190″) THREAD LENGTH TO 2-1/2″ MAXIMUM SHANK LENGTH 3″ PRODUCTION RATE 250 – 500 PPM
Posen, IL
Trusted Seller
#20-225 HARTFORD HIGH SPEED THREAD ROLLER for LONG PARTS
- Manufacturer: Hartford
SPECIFICATIONS: MAX. SHANK LENGTH: 6.000 ELECTRICS:.:. 480V/3PH/60HZ FEATURES: SPECIAL #20 DIE POCKET (6-1/2” deep) ADJUSTABLE STAND and 40” SLINGER BOWL FEEDER RAILS SET-UP FOR LONG PARTS COOLANT TANK & PUMP PNU...
Byron, IL
Trusted Seller
2018 GEN MILL T-700
- Manufacturer: GEN MILL
2018 GENMILL T-700 Drill-Mill-Tap Center available, featuring 27.56" X, 16.93" Y, 12.99" Z travel. Equipped with 7.5 hp power, 12,000 RPM, 21 ATC, and BT-30 taper. 12,000 RPM Direct Drive Spindle 6,000 RPM Tappin...
Schaumburg, IL
Trusted Seller
Waterbury #20 HF Hand Feed 3/8″ Thread Roller
- Manufacturer: Waterbury Farrel
WATERBURRY FARREL MODEL 20 HEAVY FRAME HAND FEED THREAD ROLLER; S/N 221199 3/8″ THREAD DIAMETER, 3″ THREAD LENGTH 60 PPM
Byron, IL
Trusted Seller
Waterbury #50 Heavy Frame Thread Roller w/ Adjustable Pitman
- Manufacturer: Waterbury Farrel
Reconditioned Adjustable Pitman Variable Speed Drive
Byron, IL
Trusted Seller
Waterbury #50 Heavy Frame Thread Roller w/ Adjustable Pitman
- Manufacturer: Waterbury Farrel
Reconditioned Adjustable Pitman Variable Speed Drive
Byron, IL
Trusted Seller
#20 Waterbury Heavy Frame Thread Roller w/ Pick & Place
- Manufacturer: Waterbury Farrel
Heavy Frame Pick & Place Location- Byron, IL
Byron, IL
Trusted Seller
#20 Waterbury Horizontal Thread Roller / VF Drive / Adjustable Pitman
- Manufacturer: Waterbury Farrel
Horizontal Thread Roller Adjustable pitman VF Drive 220 volt
Byron, IL
1/2″ Saspi GV3-20 Thread Roller
- Manufacturer: SASPI
- Threading length: 75 millimeter
28″ VIBRATORY BOWL ADJUSTABLE PITMAN COOLANT TANK Min/max thread diameter: 5-12mm | Max thread length: 75mm | Max length blank: 100mm | Max height under head: 80mm | Speed: 85-110-170-220 ppm | Motor: 13kW DC & C...
Posen, IL
1/2″ Saspi GV 3-30 Thread Roller
- Manufacturer: SASPI
4-12mm diameter 10-130 length 50-200 PPM Approx measurements: Moving die 9″ x 1.5″ x 4″ high Stationary die 7.5″ x 1-3/8″ x 4″ high Comes with Hopper stand 194, bowl stand 195, Oil tank 196
Posen, IL
1/2″ Sanmei THI-12AL Horizontal Thread Roller
Nominal Diameter M6 – M12 Length Under Head 120mm Thread Section 50mm Thread Pressure 17,000kg Output 4P 11kW Speeds 15-50 ppm Weight 6 mtons Coolant 70 liters Std. Stroke 730mm Capabilities: Thread Rolling Groov...
Posen, IL