Used Heat Exchangers

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 232711

• Manufacturer: APV /Hebeler

Minimal design metal temp.=-20 degrees F at 200 psi.

Block Heat Exchanger 187.5 m² (2,018 ft²) - IPP# 246426

• Manufacturer: Kapp

Additional Info:

Stainless Steel Austenitic Air Fin Heat Exchanger - IPP# 222358

• Manufacturer: Balke Durr

fin fan overhead cooler design pressure 3.2 bar @ 135 degrees C working pressure 1 bar @ 60 degrees C fins are 54mm diameter (2) appox 46.5 m3/second type LPVT 4 ventilator fans mounted underneath 2500mm diameter

Calorplast PVDF Corrosive Media Tube Plate Heat Exchanger 45gpm 116PSIG 55°F

• Manufacturer: Calorplast

“NEW OLD STOCK.” Calorplast PVDF Corrosive Media Tube Plate Heat Exchanger 45gpm 116PSIG 55°F Calorplast PVDF Corrosive Media Tube Plate Heat Exchanger 45gpm 116PSIG 55°F Shipping Shipping cost: Calculated Freigh...

HUGHES-ANDERSON ENGINEERING CORP

• Manufacturer: Hughes

used 3,000 sqft Stainless Steel Shell and Tube Heat Exchanger. TUBES: 316 Stainless Steel, (796), 3/4" OD, Rated 135 PSI @ 150/-20 DegF, 12" in/out. SHELL: 304 Stainless Steel, 32" Diameter x 20' L, Rated 150...

Unused Southern Heat Exchanger Corp. approximately 2,395 square foot Shell and Tube Heat Exchanger

• Manufacturer: Southern Heat Exchanger Corp.

Unused Southern Heat Exchanger Corp. approximately 2,395 square foot Shell and Tube Heat Exchanger. 39” diameter X 9’ 5” face to face length. Carbon steel shell rated 602 PSI @ 15 to 500 degrees F. (1296) 3/4” Al...

Unused Southern Heat Exchanger Inc. approximately 5,331 square foot Shell and Tube Heat Exchanger

• Manufacturer: Southern Heat Exchanger Corp.

Unused Southern Heat Exchanger Inc. approximately 5,331 square foot Shell and Tube Heat Exchanger. 54.25” diameter X 12’ face to face length. Carbon steel shell rated 301 PSI @ -20 to 500 degrees F. (2359) 3/4” a...

ITT 5-030-05-024-002 Tube & Shell Heat Exchanger – Industrial Grade

• Manufacturer: ITT

“New” ITT 5-030-05-024-002 Tube & Shell Heat Exchanger – Industrial Grade ITT 5-030-05-024-002 Tube & Shell Heat Exchanger – Industrial Grade THIS ITEM IS USED. CLEAN AND WELL KEPT. SEE ALL PHOTOS FOR FULL COND...

APV SR6-GLM-T

• Manufacturer: APV - Gaulin

Used approx. 275 Sq.Ft. APV Crepaco, Titanium, Plate Exchanger, Model # SR6-GLM-T. Rated for 100 psi @ 200 F. (37) 20" x 56" Titanium Plates with EPDM Gaskets. 5' 11.75" High x 20" Wide x 4' 2.5" Deep. Serial #76...

Hastelloy C22 Calorifier Shell and Tube Heat Exchanger - IPP# 247267

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 229451

Duty: 1.41 MW

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 246071

• Manufacturer: Ward Tank Co

Note: the NB Papers report this unit to be vertical, however it is set to be in the horizontal position. (AS)

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 246073

• Manufacturer: Atlas Industrial

Tema Type BEM size 48-240 Vacuum Condenser