Food & Beverage Processing » Meat & Poultry Processing » Lublin

Search By Manufacturer

Search By Type

Building Filters

575

Used Meat & Poultry Processing in Lublin, Poland

  • Mixer Talsa MIX 150

    Mixer Talsa MIX 150

    • Manufacturer: Talsa
    • Model: Mix 150

    The Talsa MIX 150 mixer is used to mix not only meat, but also other products such as vegetables, fruit, and cakes. It is a device with a capacity of 150 liters, electrically powered with a total power of 1.8 kW....

    Zamość, Poland
  • Derinder Townsend 9000

    Derinder Townsend 9000

    • Manufacturer: Townsend

    Automatic skinning machine by TOWNSEND 9000 is a device that uses technology that allows the user to achieve high efficiency during the skinning process. The 9000A is the perfect solution as it removes the skin w...

    Zamość, Poland
  • Cooking kettle Gernal 500

    Cooking kettle Gernal 500

      The Gernal 500 cooking kettle is intended for meat processing plants, for cooking and brewing sausage products. The contents of the brewing vessel are heated by steam from the external steam system. Steam valve f...

      Zamość, Poland
    • Separator Westfalia BKA6

      Separator Westfalia BKA6

      • Manufacturer: GEA

      Height: 1000 | Width: 500 mm | Length: 1000 mm | Voltage: Electrical: 400V 50Hz 3N | Installed power: 4 kw

      Zamość, Poland
    • Mixer with cooling Alco AMP

      Mixer with cooling Alco AMP 1600

        Height: 2100 | Width: 1600 mm | Length: 2800 mm | Voltage: Electrical: 400V 50Hz 3N | Installed power: 15 kw | Main material: Stainlees Steel | Mixing system: Paddle | Product discharge: Pneumatic dampers, front...

        Zamość, Poland
      • Smoking-cooking chamber Maurer

        Smoking-cooking chamber Maurer

        • Manufacturer: Maurer

        Maurer smoking-cooking chamber Steam/electric power supply Smoke generator built into the door. 2 units available

        Zamość, Poland
      • Vibrating gutter NN

        Vibrating gutter NN

          Height: 1060 | Width: 1250 mm | Length: 2500 mm | Voltage: Electrical: 400V 50Hz 3N | Main material: Stainlees Steel | Drum holes diameter: 3 mm

          Zamość, Poland
        • Dicer Ruhle SR 2 Turbo

          Dicer Ruhle SR 2 Turbo

          • Manufacturer: Rühle
          • Model: SR2

          Height: 1280 | Width: 1600 mm | Length: 1700 mm | Voltage: Electrical: 400V 50Hz 3N | Installed power: 6,8 kw | Main material: Stainlees Steel | Pruduct chamber dimensions: 145x145 mm

          Zamość, Poland
        • Cold water cooling chamber Sorgo

          Cold water cooling chamber Sorgo

            Height: 2900 | Width: 1450 mm | Length: 3750 mm | Voltage: Electrical: 400V 50Hz 3N | Main material: Stainlees Steel | Smokehouse version: Electrical | Trolleys per batch: 3 pc | Standard trolley (1000 x 1000 x ...

            Zamość, Poland
          • Micro cutter Stephan UMB 40

            Micro cutter Stephan UMB 40

              Height: 1200 | Width: 600 mm | Length: 800 mm | Capacity: 40 l | Voltage: Electrical: 400V 50Hz 3N | Installed power: 5,5 kw | Knives amount: 2 pc.

              Zamość, Poland
            • Dicer Urschel

              Dicer Urschel

              • Manufacturer: Urschel

              Height: 2000 | Width: 1050 mm | Length: 1900 mm | Voltage: Electrical: 400V 50Hz 3N | Main material: Stainlees Steel

              Zamość, Poland
            • Container with mixer and cooling

              Container with mixer and cooling Etscheid RT 1680/1650

              • Manufacturer: Etscheid

              The round tank allows cooling and storing milk even in a small area. The entire floor is designed as an evaporator surface. Cooling aggregate and washer in set. Specification : Producer : Etscheid Model : RT 16...

              Zamość, Poland
            • Container with mixing and cooling

              Container with mixing and cooling Etscheid KW 700-2

              • Manufacturer: Etscheid

              Etscheid milk coolers are highly reliable, space-saving, energy-efficient, and therefore economical. High-quality stainless steel provides excellent insulation and thus prevents the temperature of the milk in the...

              Zamość, Poland
            • Smoke chamber Maurer

              Smoke chamber Maurer

              • Manufacturer: Maurer

              Height: 3000 | Width: 1450 mm | Length: 3500 mm | Main material: Stainlees Steel | Time of realisation: 4-6 weeks | Smokehouse version: Steam | Trolleys per batch: 3 pc | Standard trolley (1000 x 1000 x 2000 mm)...

              Zamość, Poland
            • Block cutter Nagema

              Block cutter Nagema

              • Manufacturer: Nagema

              Height: 2100 | Width: 1000 mm | Length: 1630 mm | Voltage: Electrical: 400V 50Hz 3N | Installed power: 4,5 kw | Main material: Stainlees Steel

              Zamość, Poland
            89101112

            Overview

            Meat & poultry processing equipment encompasses machines used for the slaughtering, cutting, and packaging of meat and poultry products. This category includes slicers, grinders, saws, and packaging machines specifically designed to handle raw and processed meats efficiently and hygienically, ensuring product quality and safety.

            FAQ

            What should I look for when buying used meat & poultry processing equipment?

            Check for signs of wear and tear, ensure all parts are functioning properly, and verify the equipment has been regularly maintained. It's also important to check for any hygiene certifications and compliance with industry standards.

            How can I safely ship meat & poultry processing equipment?

            Use a specialized transport service experienced in handling heavy and delicate machinery. Ensure the equipment is thoroughly cleaned and properly secured to prevent any damage during transit.

            What are the maintenance requirements for meat & poultry processing equipment?

            Regular maintenance includes thorough cleaning and sanitizing after each use, checking and sharpening blades, and ensuring all moving parts are lubricated. Follow the manufacturer's guidelines for specific maintenance routines and schedules.