Food & Beverage Processing » Meat & Poultry Processing » California

Building Filters

18

Used frames in California, USA

  • Trusted Seller
    Technoclipper DCA-E 400 clipping machine

    Technoclipper DCA-E 400 clipping machine

    • Manufacturer: TECHNOCLIPPER

    Technoclipper DCA-E 400 clipping machine, dual clip magazines, currently set on 5/16" clips, adjustable knife and clipping times, 2" diameter feed tube, 2-1/2" threaded product infeed, pneumatically controlled, s...

    Lodi, CA
  • Hausmann Butcher Block Crank Table

    Hausmann Butcher Block Crank Table

    • Manufacturer: Hausmann

    SKU: DYN-4325 Country of Origin: USA Easy to use crank gear allows for height adjustments from 27” to 39” Industrial strength neutral gray steel frame with H-brace supports and levelers Crank handle is retractabl...

    $1,550 USD
    San Diego, CA
  • Trusted Seller
    Grinder, Meat, Butcher Boy, Model

    Grinder, Meat, Butcher Boy, Model 200, Stainless Steel, 5" Diameter #S741090

    • Manufacturer: Butcher Boy

    Butcher Boy meat grinder, Model 200, all stainless steel contacts. Trough measures 24" long X 24" wide X 22" deep with 5" diameter side inlet. Includes 7.5 HP, 208V, 3/60Hz AF-300 P11 adjustable frequency drive. ...

    San Dimas, CA
  • Trusted Seller
    Stephan model MCH-D100A emulsifier with

    Stephan model MCH-D100A emulsifier with twin Microcut head

    • Manufacturer: Stephan
    • Model: MCH-D

    Stephan model MCH-D100A emulsifier with twin MicroCut head, 8" inlet, 3" Tri-Clamp discharge, serial number 279816, motor number RDXY280S-2, with cutting head, 75 HP electric motor drive, 3565 RPM, wired 220/440/...

    Lodi, CA
  • Trusted Seller
    Cutter, Scoring, 600MM, 24", S/st,

    Cutter, Scoring, 600MM, 24", S/st, Meat Scoring Machine, #S742848

      Stainless Steel Scoring Machine, belt measures approximately 600mm (24") wide X 1200mm (48") long with 150mm X 750mm scoring section. Unit has 39" feed height and 36" discharge height. Mounted on stainless steel ...

      Chowchilla, CA
    • Trusted Seller
      Tipper Tie-Alpina model 18/15 Swiper

      Tipper Tie-Alpina model 18/15 Swiper tie clipping machine

      • Manufacturer: TIPPER

      Tipper Tie-Alpina model 18/15 Swiper tie clipping machine, all stainless steel contact and frame construction, unit was fed by a Vemag HP20E stuffer and ran both 1 pound and 5 pound chubs at speeds up to 120/minu...

      Lodi, CA
    • Trusted Seller
      Press, Belt, Stainless Steel, 26"

      Press, Belt, Stainless Steel, 26" X 114" Belt #S742877

        Stainless Steel Belt Press, belt measures 26" wide X 114" long. Unit features adjustable belt clearance, 44" feed height, 46" discharge height. Includes start/stop controls. Mounted on stainless steel frame with ...

        Chowchilla, CA
      • Trusted Seller
        Press, Belt, S/st, 25" X

        Press, Belt, S/st, 25" X 116" Belt #S742867

        • Manufacturer: Other

        Press, Belt, stainless steel, 25" X 116" Belt. Stainless Steel Belt Press, belt measures 25" wide X 116" long. Unit features adjustable belt clearance. 4' Discharge height. Includes start/stop controls. Mounted o...

        Chowchilla, CA
      • Trusted Seller
        Reiser Fomaco model FGM 26/52

        Reiser Fomaco model FGM 26/52 M2 needle injector

        • Manufacturer: Fomaco
        • Model: FGM 26

        Reiser Fomaco model FGM 26/52 M2 needle injector, all stainless steel contact and frame construction, serial number 10610, new in 2007, touch screen controls, self-balancing centrifugal pump, unit rated to 20-90 ...

        Lodi, CA
      • Trusted Seller
        Lump Breaker, CMP Declumper, Rotary

        Lump Breaker, CMP Declumper, Rotary Tumble Separator, Stainless Steel, #5990945

        • Manufacturer: CMP

        CMP Declumping Rotary Tumbler Separator, features a hopper inlet measuring 50" x 24" x 26" high, feeding into a 12" diameter x 72" long paddle infeed. After paddle section, the separator includes a screening sect...

        San Dimas, CA
      • Trusted Seller
        Nantsune Model HS-360 Instant Automatic

        Nantsune Model HS-360 Instant Automatic Vertical Meat Slicer

          The Nantsune Model HS-360 Instant Automatic Vertical Meat Slicer allows for Meat and processed meat up to 13.9" in width to be chopped into sliced chunks all in one seamless run through. These slices are even and...

          Corona, CA
        • Trusted Seller
          Suhner WS Series Meat Injector

          Suhner WS Series Meat Injector

          • Manufacturer: Suhner
          • Model: WS

          The Suhner WS Series Meat Injector is manufactured with 300mm and 450mm conveyor belt width and are standard equipped with 10 to 320 needles. The mechanical adjustment of the pressure of the belt speed and the pa...

          Corona, CA
        • Trusted Seller
          Suhner WS-ENFU Meat Tenderizer-Injector

          Suhner WS-ENFU Meat Tenderizer-Injector

          • Manufacturer: Suhner
          • Model: WS

          The Suhner WS-ENFU Series Meat Tenderizer-Injector is manufactured For bone-in and boneless product with 300mm and 450mm conveyor belt width and are standard equipped with 10 to 320 needles. The injection pump on...

          Corona, CA
        • Trusted Seller
          RAM Model 40 Table Top

          RAM Model 40 Table Top Marinating Vacuum Tumbler

            Our RAM Model 40 Table Top Marinating Vacuum Tumblers consist of compact 40-pound models that are ideal for restaurants, small meat operations and testing facilities. Do not be fooled by their small size; with a ...

            Corona, CA
          • Trusted Seller
            Promarks Model TM40 Table Top

            Promarks Model TM40 Table Top Marinating Vacuum Tumbler

              Our Promarks Model TM40 Table Top Marinating Vacuum Tumbler series of vacuum tumblers consist of compact 20 and 40-pound models that are ideal for restaurants, small meat operations and testing facilities. Do not...

              Corona, CA
            12

            Overview

            Meat & poultry processing equipment encompasses machines used for the slaughtering, cutting, and packaging of meat and poultry products. This category includes slicers, grinders, saws, and packaging machines specifically designed to handle raw and processed meats efficiently and hygienically, ensuring product quality and safety.

            FAQ

            What should I look for when buying used meat & poultry processing equipment?

            Check for signs of wear and tear, ensure all parts are functioning properly, and verify the equipment has been regularly maintained. It's also important to check for any hygiene certifications and compliance with industry standards.

            How can I safely ship meat & poultry processing equipment?

            Use a specialized transport service experienced in handling heavy and delicate machinery. Ensure the equipment is thoroughly cleaned and properly secured to prevent any damage during transit.

            What are the maintenance requirements for meat & poultry processing equipment?

            Regular maintenance includes thorough cleaning and sanitizing after each use, checking and sharpening blades, and ensuring all moving parts are lubricated. Follow the manufacturer's guidelines for specific maintenance routines and schedules.