Used Electrical Test Instruments in Dublin, Ireland

NoiseKen FNS-AX3-B50

• used

• Manufacturer: NoiseKen

Details The Noiseken FNS-AX3-B50 is an advanced Fast Transient Burst Simulator designed for complance testing in accordance with IEC61000-4-4 edition 2. This unit features Pulse Outputs up to 4.8 kV at 2 MHz Puls...

Keysight Technologies 8546A

• used

• Manufacturer: Agilent - Keysight

Details The Keysight (Agilent) 8546A EMI Receiver, composed of the 85462A RF Section and 85460A RF Filter Section, is a CISPR 16-1 compliant system for precise EMI testing from 9 kHz to 6.5 GHz. It enables confor...

Teseq (Schaffner) NSG437

• used

• Manufacturer: Teseq - Schaffner

Details TESEQ (SCHAFFNER) NSG437 The Teseq (Schaffner) NSG437 ESD Simulator is designed to sit comfortably in the operator's hand, with cur operating conditions constantly displayed and clearly visible. The simul...

Haefely PIM120

• used

• Manufacturer: Haefely

Details Haefely PIM120 (call for availability) The Haefely PIM120 Impulse Module is used with the PCD120 to test telecom systems using the 10/700us impulse (also called telecom impulse). This impulse is character...

Haefely PCD120

• used

• Manufacturer: Haefely

Details Haefely PCD120 The Haefely PCD120 CDN, as part of the PSURGE 8000 system is tailored to meet the ITU and IEC requirements for 2 & 4 wire interfaces. It allows the selection of both the required resistors ...

EMC Partner TRA2000

• used

• Manufacturer: EMC

Details The EMC Partner TRA2000 Transient Test System offers full compliance CE Mark and ANSI transient test solutions. A choice of 4kV or 6kV SURGE generators with Combination, 100 kHz Ring, and 10/700 waves plu...

Haefely PIM100

• used

• Manufacturer: Haefely

Details Haefely PIM100 The Haefely PIM 100 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling/Decoupling Networks (CDNs) for superimposition of the impulse on AC and DC power line...

EMCO 3810/2

• used

• Manufacturer: Emco

Details Emco 3810/2 The Emco 3810/2 Line Impedance Stabilization Network is a twochannel low pass filter network designed to isolate the equipment under test from an external power source while steering any radio...

Schaffner NSG 500C/506C

• used

• Manufacturer: Teseq - Schaffner

Details The NSG500C unit contains two Generators in a compact form, one for the microsecond Pulse range (Pulses 1 and 2) and the other for the fast Pulse bursts in the nanosecond range

Teseq (Schaffner) NSG 4070

• used

• Manufacturer: Teseq - Schaffner

Details Signal generator 9 kHz to 1 GHz Power meter 9 kHz to 1 GHz (4 channels, thereof 1 for internal use) Use of external amplifiers and directional couplers possible 5,7? TFT color display as well as hard and ...

Marconi IFR Aeroflex 2025

• used

• Manufacturer: Aeroflex

Details Signal Generator, 2.51 GHz Max, Synthesized, AM / FM / Phase / Pulse Modulation, TCXO Timebase

Schaffner SL400-071

• used

• Manufacturer: Teseq - Schaffner

Schaffner PNW2053B

• used

• Manufacturer: Teseq - Schaffner

Details The Schaffner PNW2053B is a Pulse Network designed for installation into the NSG2050 High Power Pulse Generator Mainframe.

Schaffner NSG435

• used

• Manufacturer: Teseq - Schaffner

Details +/- 16,5KV Electrostatic Discharge Simulator, conform to CEI 1000-4-2 Hand held electro static discharge (ESD) generator. +-16kV, 150 pF/330 Ohm discharge network. for IEC 801-2 (1991) Contains built...

Schaffner NSG2025

• used

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 2025 is a burst Generator and the choice for users who need the maximum in Pulse Amplitude/Frequency capabilities, flexibility, coupling Network features and EUT connectivity.