Test, Lab, Medical equipment » Materials Testing

Search By Manufacturer

Search By Country

Building Filters

193

Used moldes

  • Buehler Simplimet press with 1"

    Buehler Simplimet press with 1" mold and 115 volt heater.

    • Manufacturer: Buehler
    • Model: Simplimet

    Buehler Simplimet press with 1" mold and 115 volt heater.

    $1,925 USD
    Salem, MA
  • Institute of Foundry Testing Institute

    Institute of Foundry Testing Institute Hardness of the Mold Scale A

    • Manufacturer: Instytut Odlewnictwa Zaklad Doswiadczalny

    for direct reading of the surface hardness of compacted green sand molds

    Meinerzhagen, Germany
  • Buehler Simplimet II specimen mounting

    Buehler Simplimet II specimen mounting press 20-1320-115, with a choice of 1",

    • Manufacturer: Buehler
    • Model: Simplimet

    Buehler Simplimet II specimen mounting press 20-1320-115, with a choice of 1", 1.25" or 1.5" mold, 115 volt heater 85#

    $2,750 USD
    Salem, MA
  • Carver 3894 64353

    Carver 3894 64353

    • Manufacturer: Carver

    Carver 4 Post 30 Ton Auto Series Hydraulic Laboratory Press. Maximum clamping force 30 tons. Platen size 12" x 12". Daylight opening 1 to 17 inches. Ram stroke 6". Part Number 3894.1NEO. Does not have heated plat...

    $11,500 USD

    Get financing

    Est. $226/mo

    Freehold Township, NJ
  • MALCUS / HYBE SPO-300

    MALCUS / HYBE SPO-300

    • Manufacturer: Malcus

    Table 725x570 mm, box max.800x680x350 mm, pressing force 8.5 t, panel

    Meinerzhagen, Germany
  • +GF+ - GEORG FISCHER PVP

    +GF+ - GEORG FISCHER PVP

    • Manufacturer: Georg Fischer

    Battery-operated measuring instrument with digital display for determining the indentation resistance [N/m²] as a measure of the mold compaction of test specimens and molds made of green sand

    Meinerzhagen, Germany
  • +GF+ - GEORG FISCHER PFH

    +GF+ - GEORG FISCHER PFH / GM-246

    • Manufacturer: Georg Fischer

    for direct reading of the surface hardness of compacted green sand molds

    Meinerzhagen, Germany
  • 2005 SCOVAL FONDARC Technologies ROTOCONTROL

    2005 SCOVAL FONDARC Technologies ROTOCONTROL RTC 106 PB

    • Manufacturer: Scoval Fondarc

    Sand removal device (for mixer with fixed drum), online measurement and control of compactability (molding sand moisture) and compressive strength (additive dosing), without control system

    Meinerzhagen, Germany
  • +GF+ - GEORG FISCHER PCR

    +GF+ - GEORG FISCHER PCR

    • Manufacturer: Georg Fischer

    Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials

    Meinerzhagen, Germany
  • +GF+ - GEORG FISCHER SPCR

    +GF+ - GEORG FISCHER SPCR

    • Manufacturer: Georg Fischer

    Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials

    Meinerzhagen, Germany
  • JANKE & KUNKEL MINI-MR

    JANKE & KUNKEL MINI-MR

    • Manufacturer: Janke & Kunkel

    Adjustable stirring frequency, 0 - 2,000 rpm, 1.5 W, 220 V, 50 Hz

    Meinerzhagen, Germany
  • RETSCH EM 2200 T

    RETSCH EM 2200 T

    • Manufacturer: Retsch

    Hotplate, adjustable temperature and stirring frequency, 230 V, 1850 rpm, 630 W

    Meinerzhagen, Germany
  • +GF+ - GEORG FISCHER PRA

    +GF+ - GEORG FISCHER PRA

    • Manufacturer: Georg Fischer
    • Model: PRA

    Test specimen cylinder bushing, ram base, ejector, reading scale

    Meinerzhagen, Germany
  • +GF+ - GEORG FISCHER SPDU

    +GF+ - GEORG FISCHER SPDU

    • Manufacturer: Georg Fischer
    • Model: SPDU

    for determining the gas permeability, measuring ranges 0 to 50 or 0 to 500 Gd

    Meinerzhagen, Germany
  • +GF+ - GEORG FISCHER SPDU

    +GF+ - GEORG FISCHER SPDU

    • Manufacturer: Georg Fischer
    • Model: SPDU

    for determining the gas permeability, measuring ranges 0 to 50 or 0 to 500 Gd

    Meinerzhagen, Germany
12345

Overview

Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

FAQ

What should I consider when buying materials testing equipment?

Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

How do I ensure the materials testing equipment is shipped safely?

Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

What is the maintenance schedule for materials testing equipment?

Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.