Used Materials Testing in South Africa

Dynamic friction in cylindrical pin – roller (TM 260.05)

frictional forces between two sliding friction pairs Description: In bearing and drive technology, dynamic friction occurs at the sliding and rolling points, which leads to power losses in the technical systems. ...

Pressure distribution in journal bearings (TM 260.06)

depiction of radial pressure distribution in a journal bearing at different bearing gap widths Description: The field of tribology covers all forms of friction. Dry, mixed and fluid friction all occur in journal ...

Bearing friction (TM 232)

friction in slide bearings and roller bearings Description: Bearings can be classified as slide bearings or roller bearings depending on the nature of their motion. In slide bearings, there is a sliding motion be...

Fully Automatic Electronic Bitumen Penetrometer (UTB-0130)

Bitumen and Bituminous Binders Product codes: UTB-0130 Fully Automatic Electronic Bitumen Penetrometer with automatic surface detection is used for determination of the needle penetration according to EN 1426, AS...

Structural Systems

• Manufacturer: UTEST

Description: UTEST became leading testing equipment supplier in Turkey and aims to maintain highest product standard in the world with continuous research and development activities. UTEST manufactures Electromec...

ADVANCED COLOR SCREEN LEEB HARDNESS TESTER (LESOLH300)

Description: The Advanced Colour Screen Leeb Hardness Tester is a split-type measuring instrument which can measure the hardness of common metal materials quickly, without damage and with high accuracy. It can be...

Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

• Manufacturer: UTEST

Product Code: Any machine having different capacities and features is available upon request Description: UTSP-0190, 0192, 0194, 0196 models with outer diameters from 200 mm up to 2900 mm, UTSP-0200, 0202, 0204, ...

Motorized Pendulum Impact Tester (UTCI-0150)

• Manufacturer: Labequip

Product Codes: Description: Impact test determines the amount of energy absorbed by a material during fracture. This absorbed energy is a measure of a given material’s toughness and acts as a tool to study temper...

Flexural Frame U/C Type (UTC-5600)

• Manufacturer: UTEST

Compression and Flexural Testing Machines Product Codes: UTC-5600 200 kN Capacity Flexural Testing Frame U Type UTC-5700 300 kN Capacity Flexural Testing Frame C Type Description: The vers...

600 kN Capacity Flexural Frame Four Column Type (UTC-5660)

• Manufacturer: UTEST

Compression and Flexural Testing Machines Description: UTEST 600 kN capacity Flexural Frame is designed for minimum deflection at maximum load resulting in very high accuracy. The load frame is a four-column desi...

Automatic Electronic Bitumen Penetrometer (UTB-0126)

Bitumen and Bituminous Binders Product codes: The UTB-0126 Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetra...

Automatic Asphalt Indentation Penetrometer (UTAS-2130)

Design and Testing of Bituminous Mixtures Product Codes: Description: UTAS-2130 Automatic Indentation Penetrometer determines the resistance of an asphalt cube and cylindrical specimens to indentation when force ...

MOT Straightedge (UTAS-2127)

Design and Testing of Bituminous Mixtures Product Codes: Description: The straightedge is used for measuring single irregularities attributable to quality defects in new surface course(s) of roads, airfields and ...

Travelling Beam Device (UTAS-2125)

• Manufacturer: Labequip

Design and Testing of Bituminous Mixtures Description: The UTAS-2125 Travelling Beam Device is used to check for any irregularities in both concrete and bituminous road surfaces. Deviation of the surface from a s...

Distance Pieces and Platens for Frames (UTCM-4630)

• Manufacturer: Labequip

Compression and Flexural Machines Product Code: Distance Pieces for Frame: Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the ...