Used Materials Testing in South Africa

Universal Cutting Machine Small (UTC-1010)

• Manufacturer: Labequip

Sample Preparation Product Code: Description: The UTC Series Universal Cutting Machine has been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens. Special clamp assem...

Slake Durability Apparatus (UTR-0390)

• Manufacturer: UTEST

Sample Preparation Product Code: Description: This test method has been developed to assess the deterioration of rocks over a period of time when subjected to water immersion. Slake durability is a simulated weat...

Grid Sieve Sets (Flakiness Index Sieve EN) (UTA-0420)

• Manufacturer: Labequip

General and Geometric Properties Product Code: Description: Used for the determination of the flakiness index of the aggregate. Consisting of an electrostatically painted frame and 5 mm diameter stainless steel b...

Distance Pieces and Pedestal (UTC-4630)

• Manufacturer: UTEST

Compression Testing Frames Product Code: Description: Distance pieces are used to reduce the amount of vertical clearance between the upper platen and the lower platen. For lowering the minimum distance between u...

Nordic Abrasion Machine (UTA-0750)

Mechanical and Physical Properties Product Code: UTA-0750 Nordic Abrasion Machine has been developed for testing the resistance of aggregates to wear by abrasion from studded tyres. The test is performed on natur...

Rock Classification Hammer L Type (Schmidt Hammer) (UTR-0562)

• Manufacturer: Schmidt

Classification Tests Product Codes: Description: UTR-0562 Rock Classification Hammer together with UTR-0565 NW Rock Cradle is an easy-to-use apparatus for measuring the rebound index on rock cores and samples. Th...

Pocket Shear Vane Device (UTS-0088)

• Manufacturer: Labequip

Field Inspection and Sampling The UTS-0088 Pocket Shear Vane Device is a practical equipment for determining the shear strength of cohesive soils. It is widely used to perform onsite measurements of excavations c...

Blaine Air Permeability Apparatus (UTCM-0240)

• Manufacturer: Labequip

Physical and Chemical Properties Product Code: The UTCM-0240 Blaine Air Permeability Apparatus is used to determine the fineness of Portland cement, limes and similar powders expressed in terms of their specific ...

Flakiness Index Sieve Sets BS (UTA-0410)

• Manufacturer: Labequip

General and Geometric Properties Product Code: Description: Aggregate particles are considered as flaky when their thickness is less than 0.6 of their mean sieve sizes. Aggregate to be classified is separated int...

Specific Gravity Frame (UTW-1000)

• Manufacturer: Labequip

Mechanical and Physical Properties Product Code: The Specific Gravity Frame is used in conjunction with a suitable electronic balance for specific gravity determination of fresh and hardened concrete and aggregat...

Specific Gravity Frame (UTW-1000)

• Manufacturer: Labequip

Mechanical and Physical Properties Product Code: Description: The Specific Gravity Frame is used in conjunction with a suitable electronic balance for specific gravity determination of fresh and hardened concrete...

Large Curing Tanks (UTC-0950)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: The UTC-0950 steel, UTC-0960 and UTC-0962 Plastic Curing Tanks are designed for curing concrete cubes and cylinders. The temperature can be adjusted and can b...

Profometer PM-630 Rebar Detector (UTC-2092)

• Manufacturer: Profometer

Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Description: Profometer PM-630 Rebar Detector is an advanced cover meter to detect location of rebars, measurement of concrete cover an...

Fully integrated Rebar Detector and Covermeter (UTC-3010)

Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Description: UTC-3010 Fully integrated Rebar Detector and Cover meter is a versatile rebar detector system. This is coupled with rebar-...

COMPRESSION DEVICE FOR ROCK CORES (LSL946)

• Manufacturer: Labequip

For cores up to 55mm diameter For performing compression tests on rock cores with a maximum diameter of 55mm and height between 95mm and 110mm. The upper compression platen is fitted with a spherical seat, whilst...