Test, Lab, Medical equipment » Materials Testing » Taiwan

Building Filters

15

Used recording in Taiwan

  • Adhesion/Release Tester Confirm to FINAT

    Adhesion/Release Tester Confirm to FINAT 4 Standard

    • Manufacturer: cometech testing machines

    QC-527 test range can do low and high speed peel test and also for 90 ° 、180° multi-angle peel test. Low speed peeling force generally uses 300mm/min to proceed with test, testlow-stick adhesive label tear force....

    Taichung City, Taiwan
  • Electric Plug / Cord Bending

    Electric Plug / Cord Bending Tester Confirm to GB/T 14471 Standard

      This tester is designed for conducting bending tests on electrical wires. When the internal conductor breaks due to excessive bending and causes an open circuit, the bending cycle count is recorded as the enduran...

      Taichung City, Taiwan
    • Water Penetration Tester Confirm to

      Water Penetration Tester Confirm to AATCC127, JIS-L1092, ISO811 Standard

      • Manufacturer: cometech testing machines

      QC-317A can add water pressure in constant rate on tarpaulin, when water drop penetrate from tarpaulin, at this moment the pressure is hydrostatic pressure characteristic of tarpaulin. Water pressure method: Wate...

      Taichung City, Taiwan
    • Drop Tester

      Drop Tester

      • Manufacturer: King Design Industrial

      KD 688A Drop Tester Description Characteristics PLC control, linear motor fast speed control the height setting. Alarm warning before testing. Light support structure decreases the test impact. Support dropping...

      New Taipei City, Taiwan
    • X-Sight ONE Video Extensometer

      X-Sight ONE Video Extensometer

      • Manufacturer: cometech testing machines

      The common contact type extensometer might have the unstable results or inconvenient operation issues due to its clamping, counterweight, eccentricity and the operation space problems. It has high possibility to ...

      Taichung City, Taiwan
    • Manual Drop Dart Impact Tester

      Manual Drop Dart Impact Tester Confirm to ASTM D1709 GB-9639 Standard

      • Manufacturer: cometech testing machines

      This tester conforms to test standard applicable for method A and method B. Clamp the plastic film on a round specimen holder (dia. 127mm). The impact head used in method A is dia. 38.1mm and in method B is dia. ...

      Taichung City, Taiwan
    • QC-639V/W Impact Tester Digital Type

      QC-639V/W Impact Tester Digital Type Confirm to ASTM D256、ASTM D6110、ISO179、ISO180、ISO13802 Standard

      • Manufacturer: cometech testing machines

      Impact Tester Digital Type can measure the impact resistance of polymer materials. It calculates the absorbed impact energy based on the energy conversion relation. The precision of the impact hammer will highly ...

      Taichung City, Taiwan
    • D-type Hardness Tester Confirm to

      D-type Hardness Tester Confirm to JIS K7215-1992 ASTM D2240 ISO 868 DIN 53505 Standard

        Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. ...

        Taichung City, Taiwan
      • Electronic Drop Dart Impact Tester

        Electronic Drop Dart Impact Tester Confirm to ASTM D1709 GB-9639 Standard

        • Manufacturer: cometech testing machines

        This tester is according to test standard of method A and method B. The test plastic film is clipped on dia. 127mm of round clamp by very quick pneumatic way. The impact head method A is dia. 38.1mm and method B ...

        Taichung City, Taiwan
      • A-type Hardness Tester Confirm to

        A-type Hardness Tester Confirm to JIS K7215-1992 ASTM D2240 ISO 868 DIN 53505 Standard

          Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. ...

          Taichung City, Taiwan
        • C-type Hardness Tester Confirm to

          C-type Hardness Tester Confirm to JIS S6050 Standard

            Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. ...

            Taichung City, Taiwan
          • Stand Holder Confirm to ASTM

            Stand Holder Confirm to ASTM D2240 ISO 868 DIN 53505 JIS K7215-1992 JIS S6050 Standard

              Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. ...

              Taichung City, Taiwan
            • QC-657B H.D.T. Heat Deflection Tester

              QC-657B H.D.T. Heat Deflection Tester Confirm to ASTM D648 ISO 75-1 Standard

              • Manufacturer: cometech testing machines

              The specimen is given a stress at the center, and the temperature should increase by 2 degrees Celsius per minute. When the specimen’s center area reach the deflection of 0.254mm, the temperature is determined as...

              Taichung City, Taiwan
            • Vicat Heat Deflection Tester Confirm

              Vicat Heat Deflection Tester Confirm to ASTM D648 ISO 75-1 Standard

              • Manufacturer: cometech testing machines

              The specimen is given a fixed 10N force (or 50N) at the center with a standard Ø1 mm pin, and the temperature should increase by 50 (or 120) degrees Celsius per hour. When the penetration depth of specimen reache...

              Taichung City, Taiwan
            • Portable Hydrostatic Head Tester

              Portable Hydrostatic Head Tester

              • Manufacturer: cometech testing machines

              QC-317M(N) Portable design and without electricity that can proceed with test. No time and space limitations, mainly used on the spot measurement, inspect textile water-resistance ability. The test method is divi...

              Taichung City, Taiwan

            Overview

            Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

            FAQ

            What should I consider when buying materials testing equipment?

            Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

            How do I ensure the materials testing equipment is shipped safely?

            Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

            What is the maintenance schedule for materials testing equipment?

            Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.