Used performance in Taiwan

Water Penetration Tester Confirm to AATCC127, JIS-L1092, ISO811 Standard

• Manufacturer: cometech testing machines

QC-317A can add water pressure in constant rate on tarpaulin, when water drop penetrate from tarpaulin, at this moment the pressure is hydrostatic pressure characteristic of tarpaulin. Water pressure method: Wate...

QC-528D3 Universal Testing Machine Confirm to ISO 7500-1 / ASTM E4 / ASTM D-76 / DIN 5122 / JIS B7721/B7733 / BS EN 1002-2 / BS 1610 / GB/T 228 Standard

QC-528D3 incorporates a specialized motor control and algorithm system that maximizes the performance of DC motors, bring them close to the capabilities of servo motors. This system automatically optimizes speed ...

QC-507D3 Universal Materials Tester Horizontal Type Confirm to ASTM D1000 / ASTM D3330 Standard

The QC-507D3 is capable of performing 90° and 180° peel strength, friction force, and other light-load tests. It features a built-in 2.8" touch screen, enabling testing without the need for external software, wit...

Fully Automatic Vickers Hardness Test System

• Manufacturer: Vickers

According to the test requirements, the test line segment can be drawn, the test point spacing, number of dots, angles, etc. can be input for hardness testing, and the effective hardened layer curve and data can ...

Rockwell Type Hardness Tester

• Manufacturer: Wilson Rockwell

Absolute precision performance, a combination of new design concepts and precision manufacturing Significantly strengthen the Rockwell body frame, set the highest level of strength and toughness

Press-type Vibration Tester

• Manufacturer: King Design Industrial

9363-PC-ESS Press-type Vibration Tester Description This machine complies with the IEC, JIS and other 5-100Hz low-frequency specifications; applied to test the post-assembly products at end of the production line...

Ultrasonic Flaw Detector

Proceq's advanced ultrasonic flaw detectors can provide technicians with a very comprehensive measurement solution. Including all advanced defect quantification technologies such as DGS/AVG, DAC, TGC and AWS. Tha...

Quench Hardening Energy Test System

• Manufacturer: Taiwan Nakazawa

The Jominy test piece can be automatically transferred to the hardness tester for hardness test through the automatic robotic arm device The system will automatically perform the Jominy test. All the operator has...

QC-952/954/956/958 (300~2000kN) Computerized Hydraulic Universal Testing Machine Confirm to ISO 7500-1, JJG475-88, ASTM E4, DIN5122 , JIS B7721/B7733 , EN 10002-1,EN 1002-2,BS1610,GB228 Standard

Computerized Hydraulic Universal Testing Machine is equipped with standard tensile V-shaped and flat tensile grips and compression set. The individual controller cabinet of hydraulic material testing machine is c...

X-Sight ONE Video Extensometer

• Manufacturer: cometech testing machines

The common contact type extensometer might have the unstable results or inconvenient operation issues due to its clamping, counterweight, eccentricity and the operation space problems. It has high possibility to ...

Thin Steel Plate Testing System

• Manufacturer: Taiwan Nakazawa

Fully automated process All the operator needs to do is to place the test piece, and then automatically transport the test piece and perform each test process.Automatic barcode readingAutomatically scan the barco...

QC-652B/C/D/E Melt Flow Index Tester Confirm to ASTMD1238, D3364, ISO1133, GB- T3682 Standard

• Manufacturer: Cometech Testing Machines

Melt Flow Index Tester can test thermoplastic melt mass flow rate (MFR) and melt volume flow rate (MVR), also known as MI or MFI. The Flow Indexer QC-652B can perform ISO/ ASTM standards test methods, equip with ...

Standard Electromagnetic Vibrator

• Manufacturer: King Design Industrial

KD-9363-EM Standard Electromagnetic Vibrator Description The purpose of vibration testing is to make a series of controllable vibration simulation in lab, no matter generated by natural or man-made vibration envi...

Large Automatic Metallographic Cutting Machine

• Manufacturer: Taiwan Nakazawa

The cutting room is the main area for the daily work of the operator. The new TNC re-plans the space size and lighting source according to the user's height and operating habits. The bright working environment ca...

QC-548D2 Computerized Tensile (Compression) Testing Machines

QC-548D2 is a table-type UTM with a standard 7" color touch TFT display panel for stand-alone operation. D2 system can add the portable printer to print out test results directly, it's suitable for production lin...