Used auto in Taiwan

Full-Auto Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

Demattia Flex Crack Tester Confirm to ASTM-D813, JIS-K6301 Standard

• Manufacturer: cometech testing machines

QC-625 Rubber, leather, synthetic leather, sole of shoes, after a constant flexing bending motion, observe the cracking lever to judge and compare the endurance of material. Industry: Rubber, Leather, shoes sole

TABER Abrasion Tester Confirm to ASTM D3884, ASTM D1175, ASTM D1044, ASTM D4060, TAPPI T476, SIO 9352, ISO 5470-1, JIS K7204, JIS A1453, JIS K6902, JIS L1096, JIS K 6964, DIN 52347, DIN53109, DIN53754, DIN 53799 Standard

• Manufacturer: SIO

QC-619K is made up of one specimen clamping disk and two grinding wheels and two vacuum nozzles, specimen clamps above disk with two wheels that can select different weights on specimens, grinding wheel diameter ...

Dyeing Rubbing Tester Confirm to JIS-L0801/L0849/L1006/ L1084/ K6328/P8136 Standard

• Manufacturer: cometech testing machines

QC-319 for textile, leather and fluff dyeing fastness test equipment. Test hammer surface can clamp dry or wet by organic solvent white cloth, abrasion head select 200g or 500g load, speed 30CPM to proceed with b...

MIT Folding Endurance Tester Confirm to TAPPI T423PM 、 ASTM D2176 、 JIS P8115 、 GB/T 2679.5 、 ISO 5626 Standard

• Manufacturer: Cometech Testing Machines

MIT Folding Endurance Tester is for testing the material's folding endurance strength, the machine can test the available bending times when the material bear the tension and bending angle (from +135 degree to -1...

Optical Film Abrasion Tester

WD-M013 is mainly use in light load friction test. Specimen placed on a movable platform, abrasion head is designed to be able to zero setting of original load and test load can be set to 50-2000g. Light friction...

Digital Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

Long Extensometer

• Manufacturer: cometech testing machines

Long extensometer is suitable for higher than 20% of elongation of rubber, plastic, PE, fabric, webbing of material which are high elongation measurement accessories. The specimen usually made dumbbell-shape. The...

Fully-Automatic Jominy Hardness Testing System

JOMINY hardening energy test, hardening energy -Set the Jominy Test Piece on the table.-Input the measuring condition into control PC.-The Jominy test piece is conveyed by robot arm and set on the hardness tester...

Salt Dry & Wet Compound Corrosion Testing Machine

• Manufacturer: Taiwan Nakazawa

TMJ-9704 Salt Dry-Wet Compound Corrosion Tester Description:The compound corrosion test is the closest to the actual natural conditions in the accelerated corrosion test. It simulates the conditions that are more...

Digital Metal Impact Tester Confirm to EN 10045, ASTM E 23-00a, GB T229 Standard

• Manufacturer: cometech testing machines

QC-9130(A) is suitable for metal material of large capacity impact tester. It used hammer once of swing impact specimen which broken was based on hammer of initial angle and after strike of angle to get hammer of...

Motor Twist Counter for yarn, Manual twist counter for yarn Confirm to ISO 2061 ASTM D1422 BS-903 FZ-T10001 JIS L1095 Standard

• Manufacturer: cometech testing machines

This test machine uses the characteristics of different length of yarn after twisting. Use the pointer or sensor to detect changes in the yarn to figure the twist value of the measured object. This is a very impo...

Coefficient of Friction Tester, Motor Coefficient of Friction Tester Confirm to TAPPI T-815, ASTM D202 Standard

• Manufacturer: cometech testing machines

QC-117 & QC-117A Put specimen on the platform, and then put dead weight on the top of specimen according to standard requirement. Let platform angle goes up until the deadweight slides down. Get the tan value fro...