Test, Lab, Medical equipment » Materials Testing » Taiwan

Building Filters

214

Used Materials Testing in Taiwan

  • Manual Rockwell Hardness Tester Confirm

    Manual Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

    • Manufacturer: Wilson Rockwell

    Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

    Taichung City, Taiwan
  • QC-652B/C/D/E Melt Flow Index Tester

    QC-652B/C/D/E Melt Flow Index Tester Confirm to ASTMD1238, D3364, ISO1133, GB- T3682 Standard

    • Manufacturer: Cometech Testing Machines

    Melt Flow Index Tester can test thermoplastic melt mass flow rate (MFR) and melt volume flow rate (MVR), also known as MI or MFI. The Flow Indexer QC-652B can perform ISO/ ASTM standards test methods, equip with ...

    Taichung City, Taiwan
  • D-type Hardness Tester Confirm to

    D-type Hardness Tester Confirm to JIS K7215-1992 ASTM D2240 ISO 868 DIN 53505 Standard

      Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. ...

      Taichung City, Taiwan
    • Pneumatic Specimen Punch

      Pneumatic Specimen Punch

      • Manufacturer: cometech testing machines

      QC-603A of power is pneumatic with hand safety switch design, so there will be no security problem in operation. The tester with all kind of cutter can quickly cut out various shapes of specimen. It is suitable f...

      Taichung City, Taiwan
    • Manual Crock Meter Confirm to

      Manual Crock Meter Confirm to JIS-L0849, ISO-105, AATCC-8 ,JIS-L0862 Standard

      • Manufacturer: cometech testing machines

      This tester’s abrasion head can clamp dry or wet white cloth, under 900g loads, revolving handle by hand to proceed with specimen abrasion test (Common standard is 10 test times), test speed is around 60 CPM. Aft...

      Taichung City, Taiwan
    • Dropping Impact Tester Confirm to

      Dropping Impact Tester Confirm to JIS-A5403, K6745 Standard

      • Manufacturer: cometech testing machines

      The specimen is placed on the platform of machine. Choose a designated size of steel ball to fall freely from a height, then the steel ball will impact on specimen’s surface. To observe the specimen of damaged co...

      Taichung City, Taiwan
    • Dyeing Rubbing Tester Confirm to

      Dyeing Rubbing Tester Confirm to JIS-L0801/L0849/L1006/ L1084/ K6328/P8136 Standard

      • Manufacturer: cometech testing machines

      QC-319 for textile, leather and fluff dyeing fastness test equipment. Test hammer surface can clamp dry or wet by organic solvent white cloth, abrasion head select 200g or 500g load, speed 30CPM to proceed with b...

      Taichung City, Taiwan
    • Portable Pencil Hardness Tester Confirm

      Portable Pencil Hardness Tester Confirm to ASTM D3363, ECCA T4, MILC27 227, NEW5350, SIS184187, SNV37113, JIS-C3003/D0202 Standard

        GI-M010 according to WolffWilborn standard, this tester is designed to measure the coating surface hardness scrape-resistance, applied to experiment analysis or control production quality, suitable products inclu...

        Taichung City, Taiwan
      • Manual Roller , Motor Roller

        Manual Roller , Motor Roller Confirm to JIS-C2107, Z0237, PSTC 7 Standard

        • Manufacturer: cometech testing machines

        QC-803A QC-803A is controlled by hand, hold roller and slightly go up, let fixed base leave the axle center, this moment the roller equals to standard weight, with 300mm/min speed back and forth roll through spec...

        Taichung City, Taiwan
      • Perspiration Tester Confirm to AATCC-15,

        Perspiration Tester Confirm to AATCC-15, ISO 105, JIS 0848, GB T5713 Standard

        • Manufacturer: cometech testing machines

        QC-315 is used to determine the fastness of colored textiles soaked in water condition. Using textile and one piece (multi-fiber fabric) or two pieces (single fabric) stitched, after soaking in solution, be clamp...

        Taichung City, Taiwan
      • GR-L020 Narrow Grip

        GR-L020 Narrow Grip

        • Manufacturer: cometech testing machines

        Capacity: 10N | Jaw face width: 20mm | Specimen thickness: 0.1~9mm | Mini. load cell: 10N | Temperature limits: 0~100℃ | Weight: 123g

        Taichung City, Taiwan
      • GR-L010 Elasticity Grip

        GR-L010 Elasticity Grip

        • Manufacturer: cometech testing machines

        Capacity: 10N | Jaw face width: 9mm | Specimen thickness: 0.1~2mm | Mini. load cell: 10N | Temperature limits: 0~100℃ | Weight: 38g

        Taichung City, Taiwan
      • GR-L030 Button Grip

        GR-L030 Button Grip

        • Manufacturer: cometech testing machines

        Capacity: 300N | Wire diameter: Ø7~Ø15mm | Mini. load cell: 200N | Temperature limits: 0~200℃ | Up weight: 925g | Down weight: 3468g

        Taichung City, Taiwan
      • GR-K010 Zipper Grip

        GR-K010 Zipper Grip

        • Manufacturer: cometech testing machines

        Capacity: 500N | Jaw face width: 50mm | Specimen thickness: 0.5~4mm | Mini. load cell: 50N | Temperature limits: -30~200℃ | Weight: 1727g | Standard: ASTM D2061

        Taichung City, Taiwan
      • GR-I020 Adjusted Grip

        GR-I020 Adjusted Grip

        • Manufacturer: cometech testing machines

        Capacity: 500N | Jaw face width: 88mm | Specimen thickness: 80mm | Temperature limits: 0~100℃ | Weight: 2256g

        Taichung City, Taiwan
      910111213

      Overview

      Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

      FAQ

      What should I consider when buying materials testing equipment?

      Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

      How do I ensure the materials testing equipment is shipped safely?

      Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

      What is the maintenance schedule for materials testing equipment?

      Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.